Sendy Audio, the upscale sibling under the SIVGA umbrella, is doubling down on its planar ambitions. We’ve had a strong track record with the models that have crossed our review desk, and the company clearly thinks it has another contender on its hands. The new Egret arrives as Sendy’s latest statement piece: an open back planar headphone built from the ground up with a new driver platform, a nano scale diaphragm, and the same handcrafted wooden housings that define the brand’s design language.
According to Sendy, Egret isn’t just another iteration. It’s the start of a new chapter in planar headphone engineering aimed at better accuracy, refinement, and long term listening comfort.
Exterior Design of the Sendy Audio Egret
On the outside, the Egret uses handcrafted solid wood housings that are finished by hand, giving every pair its own grain pattern and color tone. No two units look exactly the same, which adds a bit of personality and turns the headphones into a subtle fashion statement.
The open back design keeps the presentation spacious and transparent, while the contoured headband and soft leather earpads are shaped for long sessions without pressure points. It’s a practical blend of comfort and craftsmanship that reinforces what Sendy does best.
Planar Drivers & Composite Diaphragm
The Egret uses Sendy’s most advanced planar magnetic driver yet, paired with a nano scale composite diaphragm. The driver measures 98 x 83 mm, and the diaphragm comes in under 800 nanometers, giving it very low mass and the ability to react quickly and cleanly. The goal here is simple: improve accuracy, speed, and dynamic range without introducing strain or harshness.
The diaphragm is produced using an Electron Beam Evaporation Deposition process, where ultra fine aluminum circuitry is applied directly onto the surface at the atomic level. This allows for tighter consistency across the diaphragm, lower distortion, and better control over how the driver behaves from bass through treble.
Sonically, Sendy tuned the Egret to offer a full, balanced presentation with solid low end reach, clear and natural mids, and treble that remains controlled rather than sharp. The intent wasn’t to chase sheer excitement or exaggerated detail, but to create a stable, resolving headphone that works for critical listening, studio evaluation, and long listening sessions at home.
The Cable They Actually Want You to Use
Sendy bundles a proper cable with the Egret instead of the usual afterthought. The detachable balanced cable uses a triple composite structure built for clean signal transfer: 30 strands of Furukawa oxygen free copper, 10 strands of silver plated copper, and 10 strands of enamelled gold plated copper. The mix is designed to keep resistance low and preserve detail without drifting into gimmick territory.
A graphene reinforced PVC jacket keeps the cable flexible and resilient, and Sendy includes both a 4.4 mm balanced plug and a 3.5 mm single ended adapter to cover most sources and headphone amps. It’s a practical, well engineered upgrade over the generic cables that usually ship with headphones in this price range.
These specs tell you exactly what lane the Egret is built for. The 8 Hz to 40 kHz bandwidth gives the driver plenty of room to breathe without relying on DSP tricks. The 38 ohm impedance and 103 dB sensitivity mean it should be reasonably easy to drive from most modern desktop amps and balanced portables, though it will still benefit from proper power to show what the new planar motor can really do.
The weight lands at about 420 grams, which is perfectly normal for a full size planar. Not light, not punishing—just enough mass to support a large driver without turning your neck into collateral damage. With the contoured headband and leather pads doing the heavy lifting, it should manage long listening sessions without turning comfort into a compromise.
Sendy Audio Egret Specifications
| Sendy Audio Model | Egret |
| Product Type | Headphones |
| Price | $799 |
| Wearing Type | Full-size Open Back |
| Driver Type | Planar Magnetic |
| Driver Size | 98 x 84mm |
| Diaphragm | Nano-scale composite (<800nm) |
| Frequency Response | 8Hz – 40kHz |
| Impedance | 38Ω |
| Sensitivity | 103dB ± 3dB |
| Cable | 1.8m detachable triple-composite (Furukawa OFC / Silver-plated Copper / Gold-plated Copper) |
| Connectors | 2.5mm balanced with 4.4mm and 3.5mm adapters |
| Weight | Approx. 420 grams |
| Finish | Handcrafted natural wood, open-back design |
The Bottom Line
Planar magnetic headphones have been part of the landscape since Wharfedale brought them to market in 1972, and they’ve held their place thanks to speed, accuracy, and low distortion that dynamic drivers still struggle to match. They also tend to live at the higher end of the pricing ladder. Yes, you can spend nearly three grand on something like the HiFiMAN Isvarana, but there are also solid entry points like the Edition XV at $399 or the Monoprice M1070 at $349.
At $799, Sendy is clearly aiming for the middle of the market with the Egret. The goal is to deliver a more refined build, handcrafted woodwork, and a well executed planar driver without drifting into “mortgage payment” territory. Based on our experience with their previous models, it’s a smart lane for them. And while it’s not the only game in town at this price—competitors like the Meze Poet or the Dan Clark Audio models we recently reviewed offer their own takes on planar performance—the Egret brings a blend of style, comfort, and measured engineering that should resonate with listeners who want serious sound without crossing into four figure indulgence.
Price & Availability
The Sendy Audio Egret is priced at $799 / €879 / £799 from Sendy with availability on Amazon coming soon.
Related Reading:
