Archive through October 31, 2007

AV Gold Member Username: Asharfi Post Number: 1244 Registered: Aug-06	Posted on Tuesday, October 30, 2007 - 02:25 GMT cs, - Turn OFF your unit from the back - Disconnect the satellite cable - Wait 10 seconds - Reconnect the satellite cable - Turn your unit ON
mikeymo New member Username: Mikemo Torrance, California Usa Post Number: 4 Registered: Sep-07	Posted on Tuesday, October 30, 2007 - 02:26 GMT hi guys i new kid on block here,can someone please help me i did the factory default reset everthing did all over again, now i missing some of the channel.and some channel are double. how can i get the missing channel back> i have VS2000 PLATINUM. Pleaed advise what to do.
cs New member Username: Casgzz Post Number: 10 Registered: Oct-07	Posted on Tuesday, October 30, 2007 - 02:29 GMT AV, I did that but i aint getting signal, need to find another sat or something? i got the 218 bin, i was reading something about 218v1 but did not understand at all
AV Gold Member Username: Asharfi Post Number: 1248 Registered: Aug-06	Posted on Tuesday, October 30, 2007 - 02:32 GMT cs, Yes, there are some stupid problems going on with the latest Jvvh bin. Jvvh didn't make this bin, it's this other new kid who made it.
AV Gold Member Username: Asharfi Post Number: 1251 Registered: Aug-06	Posted on Tuesday, October 30, 2007 - 02:35 GMT ZIA, Please check this thread for the Pansat 2500 conversion : https://www.ecoustics.com/electronics/forum/home-video/398851.html
cs Bronze Member Username: Casgzz Post Number: 11 Registered: Oct-07	Posted on Tuesday, October 30, 2007 - 02:39 GMT AV, so i will have to wait for the bin?? no need to do anything else?
AV Gold Member Username: Asharfi Post Number: 1255 Registered: Aug-06	Posted on Tuesday, October 30, 2007 - 02:44 GMT cs, The new working bin for the converted FLUs and P2500s is out, but has some little bugs ... you can load it and watch TV ... all DN and BEV is working fine ...
cs Bronze Member Username: Casgzz Post Number: 12 Registered: Oct-07	Posted on Tuesday, October 30, 2007 - 02:50 GMT AV, mine is not converted is 2700a, just reloaded the 218 bin but i keep getting no signal =(
AV Gold Member Username: Asharfi Post Number: 1258 Registered: Aug-06	Posted on Tuesday, October 30, 2007 - 02:55 GMT Oh, so you have the original Pansat 2700? If yes, then please try to do FACTORY RESET and the check your ANTENNA SETTINGS. Then, re-scan your sats
Guy Anderson New member Username: Gq78 Post Number: 2 Registered: Oct-07	Posted on Tuesday, October 30, 2007 - 02:56 GMT can anyone please tell me how I can get my Pantec 2500 Ultra receiver working again?? It's a clone receiver of a pansat I believe.. What do I need to do now? pls anyone.. ty
Hussam Arif Bronze Member Username: Halo Toronto, Ontario Canada Post Number: 40 Registered: Oct-07	Posted on Tuesday, October 30, 2007 - 03:01 GMT For latest dish / bev keys PID 0101 and 0106 and latest bin files at ~~www.dish-keys.blogspot.com~~ Converting info and files also available
cs Bronze Member Username: Casgzz Post Number: 13 Registered: Oct-07	Posted on Tuesday, October 30, 2007 - 03:04 GMT the question is what sat should i rescan? i get 0% of quality on whatever the sat i choose =(
AV Gold Member Username: Asharfi Post Number: 1262 Registered: Aug-06	Posted on Tuesday, October 30, 2007 - 03:04 GMT Guy Anderson, From what I know, those receivers are Pansat 2500 CLONES, am I right? Well, now you have to convert Pansat 2500 CLONES to a Pansat 2700 in order to watch TV.
majid khan New member Username: Crazypal Post Number: 2 Registered: Aug-07	Posted on Tuesday, October 30, 2007 - 03:06 GMT guys can anyone tell me which file to use for a fortec lifetime ultra?
cs Bronze Member Username: Casgzz Post Number: 14 Registered: Oct-07	Posted on Tuesday, October 30, 2007 - 03:15 GMT I am lost, stuck and everything, nothing is working for me =( did echo 8, 6 change to g25 or something?
mohamadikhoshshans New member Username: Tehrani Iran, Tehran Iran Post Number: 6 Registered: Oct-07	Posted on Tuesday, October 30, 2007 - 03:16 GMT hiall Hussam Arif you give us the sit but there is 3or4 number i put it the N2 but it doesnot showed. could you give the right Dish keys please? thanks
AV Gold Member Username: Asharfi Post Number: 1265 Registered: Aug-06	Posted on Tuesday, October 30, 2007 - 03:25 GMT majid khan, You HAVE to convert your receiver to a Pansat 2700 and then use Pansat 2700 modded bins. There will be no support for Fortec STAR Lifetime Ultra receivers. In order to watch TV, you either convert your receiver to a Pansat 2700 or buy a new FTA unit.
cs Bronze Member Username: Casgzz Post Number: 15 Registered: Oct-07	Posted on Tuesday, October 30, 2007 - 03:34 GMT i am about to smash my pansat 2700a, i got neither quality nor signal! i did a factory reset but i am lost not, do not know what to do, need a manual or something}
MALdito Nica New member Username: Maldito Post Number: 6 Registered: Aug-07	Posted on Tuesday, October 30, 2007 - 03:54 GMT Alguien sabe por qué los xxx y los ppv no se pueden ver?? y de paso, me explica sobre esto: Dish Network New PID - 0106 [Last update: Tue. Oct 23, 1:14 PM CDT] 86: D6 9E 74 4D 0A CB ED 62 42 C6 A5 C1 AF AC BE 38 New 96: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 gracias estimados!!
cs Bronze Member Username: Casgzz Post Number: 16 Registered: Oct-07	Posted on Tuesday, October 30, 2007 - 03:56 GMT si, neitas actualizar el bin, el ultimo es el 218 y le pones las llaves y listo
MALdito Nica New member Username: Maldito Post Number: 7 Registered: Aug-07	Posted on Tuesday, October 30, 2007 - 03:58 GMT Sorry for the post in spanish, basically it says that I can't watch xxx and ppv channels And I wondered about the new dn key and how to use it Dish Network New PID - 0106 [Last update: Tue. Oct 23, 1:14 PM CDT] 86: D6 9E 74 4D 0A CB ED 62 42 C6 A5 C1 AF AC BE 38 New 96: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 thanks
cs Bronze Member Username: Casgzz Post Number: 17 Registered: Oct-07	Posted on Tuesday, October 30, 2007 - 04:01 GMT ok i loaded the channel list, now how do i the signal and quality thing to work???? =(
MALdito Nica New member Username: Maldito Post Number: 8 Registered: Aug-07	Posted on Tuesday, October 30, 2007 - 04:02 GMT no uso autorroll porque no tengo el cable. Todo lo hago manual hay alguna forma de realizar el cambio asi? (I don't have autoroll turned on, cause I don't have the cable. Is there a way to do it manually? the bin change, that is)
cs Bronze Member Username: Casgzz Post Number: 18 Registered: Oct-07	Posted on Tuesday, October 30, 2007 - 04:08 GMT no, neitas el cable para poder conectarlo a la caja y actualizar
ma Bronze Member Username: Manthedent Post Number: 29 Registered: Sep-06	Posted on Tuesday, October 30, 2007 - 04:08 GMT is there any new fix for pansat 2300
cs Bronze Member Username: Casgzz Post Number: 19 Registered: Oct-07	Posted on Tuesday, October 30, 2007 - 04:10 GMT ok i think my pansat is f*ckd up now..... oh well......
LK Platinum Member Username: Lklives Post Number: 13272 Registered: Jan-06	Posted on Tuesday, October 30, 2007 - 04:21 GMT ma..No fix for the 2300 since over 1 year....its a door stop now...get a new receiver...no other choices for ya... conexsat mini sonicview 4000 viewsat ultra
cs Bronze Member Username: Casgzz Post Number: 20 Registered: Oct-07	Posted on Tuesday, October 30, 2007 - 04:25 GMT my pansat is now frozen on 5 from b-75 and nothing happens, is there anything i can do or is it gone for good?????
ma Bronze Member Username: Manthedent Post Number: 30 Registered: Sep-06	Posted on Tuesday, October 30, 2007 - 04:29 GMT lk my dish used to work fine before the new thing that DN did which more specifically on the 23rd now i do get some channels except no PPv or the international channles
LK Platinum Member Username: Lklives Post Number: 13274 Registered: Jan-06	Posted on Tuesday, October 30, 2007 - 04:33 GMT ma...if thats all U want...then keep it and use it...but pansat does NOT release any more 2300 files since 10-27-2006...
Ather Ahmed Bronze Member Username: Ather_da_don Mississauaga, Ontario Canada Post Number: 17 Registered: Oct-07	Posted on Tuesday, October 30, 2007 - 12:12 GMT Need new dish keys, New bin files, or converting files? Visit ~~www.dishkeyz.blogspot.com~~
bruce Bronze Member Username: Bruce69 Post Number: 17 Registered: Oct-07	Posted on Tuesday, October 30, 2007 - 13:12 GMT LK OR ANYONE PLEASE HELP; I AM CONVERTING MY PANSAT 2500A TO 2700 USING THE CONVERTING KIT I AM USING RS232 STRAIGHT CABLE(I HAVE USED THE SAME CABLE BEFORE TO DOWNLOAD BINS)IT GIVES ME AN ERROR MESSAGE WHEN I CHOSE COM 1,2,3,4 (CANT OPEN SERIAL PORT)WHAT IM I DOING WRONG?
dannyboy Bronze Member Username: Dandaniels Post Number: 11 Registered: Aug-07	Posted on Tuesday, October 30, 2007 - 13:21 GMT HUSSAM AND ATHER. WHY DO YOU INSIST ON REPEATING THE SAME THREAD OVER AND OVER AGAIN. PEOPLE CAN READ IT AND WE KNOW SO IF YOU HAVE NOTHING ELSE TO ADD, BUZZ OFF AND GO PLAY SOMEWHERE ELSE. THANKS.
King Arthur Bronze Member Username: The_messenger Post Number: 32 Registered: Oct-07	Posted on Tuesday, October 30, 2007 - 14:13 GMT dannyboy if you read their first post there is no need for you to read the rest. others may have missed their over & over post. makes sense to me.
bruce Bronze Member Username: Bruce69 Post Number: 18 Registered: Oct-07	Posted on Tuesday, October 30, 2007 - 15:23 GMT WHY ISN'T THERE ANYONE ANSWERING MY QUESION?
sharnjit Bronze Member Username: Harjun Post Number: 57 Registered: Sep-06	Posted on Tuesday, October 30, 2007 - 15:46 GMT i have ariza700 and old bin number is 281 and now i try download the new bin 299,293 but it always say no right the model. anyone have new loader and bin please send me johal18@hotmail.com thanks
Hussam Arif Bronze Member Username: Halo Toronto, Ontario Canada Post Number: 41 Registered: Oct-07	Posted on Tuesday, October 30, 2007 - 21:47 GMT Thank you king arthur maybe some people (dannyboy) are just slow at getting stuff
Nalin Nyda Gold Member Username: Nydas Post Number: 4364 Registered: Jun-06	Posted on Tuesday, October 30, 2007 - 21:49 GMT Ariza 700 and others looking for advice on new receiver purchase. The Viewsat Ultra and Sonicview 4000 are similar. They both have USB input for new files, which is a great help. They are priced around $160-$195. For the Viewsat Ultra you have to be ultra careful about purchasing a clone - so you must buy one from a reliable authorised dealer. The CaptiveWorks 600P is a great receiver for about $100. It has had a good support all along and uses serialinputfor new files.
Nalin Nyda Gold Member Username: Nydas Post Number: 4365 Registered: Jun-06	Posted on Tuesday, October 30, 2007 - 22:01 GMT Majid Khan and Guy Anderson and others with Pansat 2500 and clones and FLU Your receiver will work in a limited way for"local channels" ,etc. It will still give you NBC, ABC, PBS, an some other channels. Notably, you will NOT get PPV and all of International channels. I have posted recommendations for a new receiver. If you do not wish to budget for a new one, I suggest you get the Pansat 2500 clone to Pansat 2700 conversion kit and convert to 2700. The kit requires you to upgrade first to a jvvh 205, then jvvh 208. Then you go up to perhaps jvvh 213 and then jvvh 218 which is the latest. YOU MUST FOLLOW THE EXACT PROCEDURE. Waiting and patience are a great virtue in this upgrade as in many BIN uploads. You just use BL Updater 1.4 only You must use jvvh BINs only. One special note: jvvh himself has advised lately that for the first time upgrade, not to use 205 but to start with 208. I have not done it that way yet, so I do not know. Also there is a zip file for converting back to 2500should something go wrong. It is called 2700 to 2500 via serial port.zip This would be a very useful file. All files have to be unzipped before use. This applies to loaders, and BIN files. Read the instructions carefully. Most of the problems arise from haste. The following sites have a lot of files and instructions. [link removed] [link removed] ~~http://www.totalfta.com~~ ~~http://www.future-fta.info~~
Eddym New member Username: Eddym Post Number: 5 Registered: Oct-07	Posted on Tuesday, October 30, 2007 - 22:25 GMT I converted my FLU to Pansat 2700 "by the book" several days ago. I scanned Echo 7 (119.0) and Echo 8/10 (110.0) satellites and everything seems to work fine. However, about every other day I lose all the channels of one satellite (usually 110.0). So, I have to rescan the missing satellite every time it goes out to get it working again. I never had this problem before. Is this one of the bugs with bin jvvh_228_pT? Is there any fix available? Any help will be greatly appreciated.
canon labtec Silver Member Username: Fortec01 Post Number: 109 Registered: Sep-06	Posted on Tuesday, October 30, 2007 - 22:42 GMT any1 have the new keys i jus got back from vaction
ZooYork Bronze Member Username: Bih Post Number: 43 Registered: Oct-07	Posted on Tuesday, October 30, 2007 - 22:43 GMT anny 1 got the keys??????
bruce Bronze Member Username: Bruce69 Post Number: 19 Registered: Oct-07	Posted on Tuesday, October 30, 2007 - 22:44 GMT NALIN CAN YOU HELP ME;I AM CONVERTING PANSAT 2500A TO 2700 USING RS232 CABLE(I HAVE USED THE SAME CABLE BEFORE TO DOWNLOAD BINS)WHEN I CHOSE THE COM1,2,3,4 GIVES ME AN ERROR MESSAGE(CANT OPEN SERIAL PORT..THE SYSTEM CANT FIND THE FILE SPECIFIED)WHAT AM I DOING WRONG?
carolina garcia Bronze Member Username: Cacalad Post Number: 42 Registered: Apr-07	Posted on Tuesday, October 30, 2007 - 22:45 GMT new keys please for dish
Yumna Idrees New member Username: Yumna18 Post Number: 10 Registered: Oct-07	Posted on Tuesday, October 30, 2007 - 22:46 GMT hey did the keys come for ariza700??????????????????????????????????????????????????????????
ma Bronze Member Username: Manthedent Post Number: 31 Registered: Sep-06	Posted on Tuesday, October 30, 2007 - 22:46 GMT LK is it safe to buy reciver from ebay?
carolina garcia Bronze Member Username: Cacalad Post Number: 43 Registered: Apr-07	Posted on Tuesday, October 30, 2007 - 22:52 GMT anyone got new keys for dish please!!!!
LK Platinum Member Username: Lklives Post Number: 13289 Registered: Jan-06	Posted on Tuesday, October 30, 2007 - 22:56 GMT ma...stay away from ebay... here a few good site to buy from [link removed] www.worldwidesatellites.com
ncroldan New member Username: Ncroldan Post Number: 5 Registered: Feb-07	Posted on Tuesday, October 30, 2007 - 23:03 GMT Nag2 keys ---------------------------------------- Dish Provider 0101: Last Updated (30 Oct '07 5:53 PM EST) Key 0: 2B D6 F6 C6 E5 B2 FA C8 79 F2 3A FF 10 4D 05 ED Key 1: 0C 7A AE 74 38 74 E1 27 18 51 F8 1A 5F 19 96 8F (Active Bev Provider 0901: Last Updated (30 Oct '07 5:53 PM EST) Key 0: 5E CF F5 EE AA F0 37 F9 43 78 54 4A A2 9E B3 98 Key 1: 34 96 C6 F7 62 EA 97 D7 89 CC 37 1B 33 72 F7 B2 (Active)
bruce Bronze Member Username: Bruce69 Post Number: 20 Registered: Oct-07	Posted on Tuesday, October 30, 2007 - 23:06 GMT LK CAN YOU ANSWER MY QUESION PLEASE
Jignesh Bronze Member Username: Jppatelahd Post Number: 12 Registered: Sep-07	Posted on Tuesday, October 30, 2007 - 23:06 GMT Dish Network Main - 0101 [Last update: Tue. Oct 30, 5:34 PM CDT] 86: 2B D6 F6 C6 E5 B2 FA C8 79 F2 3A FF 10 4D 05 ED 96: 0C 7A AE 74 38 74 E1 27 18 51 F8 1A 5F 19 96 8F New Dish Network New PID - 0106 [Last update: Tue. Oct 23, 1:14 PM CDT] 86: D6 9E 74 4D 0A CB ED 62 42 C6 A5 C1 AF AC BE 38 New 96: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ----------------------- Bell ExpressVu Main - 0901 [Last update: Tue. Oct 30, 1:25 PM CDT] 86: 5E CF F5 EE AA F0 37 F9 43 78 54 4A A2 9E B3 98 96: 34 96 C6 F7 62 EA 97 D7 89 CC 37 1B 33 72 F7 B2 New ------------- Bell ExpressVu PB - 0905 [Last update: Thurs. Mar 15, 2:01 AM CDT] 86: B7 2F 03 35 70 4A CD B0 6D 43 33 59 92 E2 1D F3 96: D5 51 BA FE 58 50 BE 61 A4 BD 09 F3 54 4F C5 FC Bell ExpressVu HD - 0906 [Last update: Thurs. Mar 15, 6:17 PM CDT] 86: 8D 1A 1C F4 2C B9 7F 85 38 65 D6 7A 5D 59 5D 88 96: 11 FE 27 1D 89 9E D3 B4 DB 8E CB C8 10 D3 E7 F7 Bell ExpressVu New PID - 0907 [Last update: Tue. Oct 30, 3:47 AM CDT] 86: 89 E0 33 90 CD BA DA D0 3E 04 C6 B4 59 A7 84 7B 96: 60 B8 E2 A1 25 9F 09 6F FB 9B 30 FF 61 95 EE 65 New ------------------ Globecast - C101 [Last update: Sat. Oct 13, 5:18 PM CDT] 86: 85 9A 02 EC 13 CF F2 AF FD 84 D0 16 9C 24 6F A9 96: 0F 2B 8A 31 84 D7 2D 2B 40 FF 5E 0B B7 DB 0D 4A }
loko100% New member Username: Loko100 Post Number: 8 Registered: Aug-06	Posted on Tuesday, October 30, 2007 - 23:08 GMT Here are the New Key: 01: 0C 7A AE 74 38 74 E1 27 18 51 F8 1A 5F 19 96 8F
james bond Bronze Member Username: Leafs Post Number: 13 Registered: Oct-07	Posted on Wednesday, October 31, 2007 - 00:20 GMT new keys posted on ~~www.ftasolutions.blogspot.com~~
Hussam Arif Bronze Member Username: Halo Toronto, Ontario Canada Post Number: 42 Registered: Oct-07	Posted on Wednesday, October 31, 2007 - 00:33 GMT Dish and bev keys and Latest bin files on ~~www.dish-keys.blogspot.com~~
dantetn Gold Member Username: Donnie1973 Post Number: 1526 Registered: May-06	Posted on Wednesday, October 31, 2007 - 00:47 GMT bruce, have u unzipped the files?
canon labtec Silver Member Username: Fortec01 Post Number: 110 Registered: Sep-06	Posted on Wednesday, October 31, 2007 - 00:49 GMT can i get ppv channels on my fortec because i got the new keys i hav been gone for while dont know wats goin on can sum explain to me please
mohamadikhoshshans New member Username: Tehrani Iran, Tehran Iran Post Number: 7 Registered: Oct-07	Posted on Wednesday, October 31, 2007 - 00:59 GMT hi all. I Thing there is no body know about Ariza700. Thanks alots
Hc Silver Member Username: Ustaad_hc Post Number: 313 Registered: Oct-06	Posted on Wednesday, October 31, 2007 - 01:36 GMT there is lot lot people waiting for ariza fix.
Nalin Nyda Gold Member Username: Nydas Post Number: 4368 Registered: Jun-06	Posted on Wednesday, October 31, 2007 - 01:56 GMT Bruce : Use BL updater 1.4 - NOTHING ELSE. Unzip the files before use.
Nalin Nyda Gold Member Username: Nydas Post Number: 4369 Registered: Jun-06	Posted on Wednesday, October 31, 2007 - 01:59 GMT Canon labtec: You have to join the 2500 to 27000 conversion club. Please don't ask for alternatives because then you sill have to buy a new receiver.
Alyas Ali New member Username: Alyas_ali Post Number: 1 Registered: Oct-07	Posted on Wednesday, October 31, 2007 - 02:15 GMT i have pansat 2500 clone any one tell me where and how i can get new bins and wot loader plz help me all
tom pat Bronze Member Username: Tupas1 Post Number: 23 Registered: Jan-07	Posted on Wednesday, October 31, 2007 - 02:39 GMT Alyas : use this link :~~http://ftabins.net/showthread.php?t=7475~~ which hve loader and everything. just follow the instruction and load. After u r done with that find this file Jvvh_218_pT and load itand then connect yr receiver to tv and scan satalite and add new key and u r fine. I did and working good.
tom pat Bronze Member Username: Tupas1 Post Number: 24 Registered: Jan-07	Posted on Wednesday, October 31, 2007 - 02:42 GMT u can down load jwh_218 from this url : ~~http://ftabins.net/showthread.php?t=11282~~
AGF Bronze Member Username: Agf Post Number: 12 Registered: Aug-06	Posted on Wednesday, October 31, 2007 - 03:00 GMT I have done the 2500 to 2700 conversion and it works fine. My question, how do I put the manuel keys, at the moment I can only see option for 0101- 00 nothing else How do I put the following Dish Network Main - 0101 [Last update: Tue. Oct 30, 5:34 PM CDT] 86: 2B D6 F6 C6 E5 B2 FA C8 79 F2 3A FF 10 4D 05 ED 96: 0C 7A AE 74 38 74 E1 27 18 51 F8 1A 5F 19 96 8F New Dish Network New PID - 0106 [Last update: Tue. Oct 23, 1:14 PM CDT] 86: D6 9E 74 4D 0A CB ED 62 42 C6 A5 C1 AF AC BE 38 New 96: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Appreciate any help in this regard
Hussam Arif Bronze Member Username: Halo Toronto, Ontario Canada Post Number: 43 Registered: Oct-07	Posted on Wednesday, October 31, 2007 - 03:16 GMT Dish and bev keys and Latest bin files on ~~www.dish-keys.blogspot.com~~
Bubbus Bronze Member Username: Bubbus Post Number: 16 Registered: Jan-07	Posted on Wednesday, October 31, 2007 - 03:21 GMT Nalin, I'm trying to convert 2500A to 2700, but the screens continuously displaying - - - - back and forth. I don't see anything else. I tried loading Jvvh 218, more than once, using BL1.4, but still no response. Please advise, you been always great help to me.
Bubbus Bronze Member Username: Bubbus Post Number: 17 Registered: Jan-07	Posted on Wednesday, October 31, 2007 - 03:30 GMT AGF, HOW DID YOU CONVERT 2500 TO 2700. PLEASE TELL ME I AM TRYING WITH 2500A, AND IT'S NOT RESPONDING ONLY DASHES (- - - - ) ARE BLINKING
mohamadikhoshshans Bronze Member Username: Tehrani Iran, Tehran Iran Post Number: 13 Registered: Oct-07	Posted on Wednesday, October 31, 2007 - 03:44 GMT hi all. could you give us the realy keys? 86: 2B D6 F6 C6 E5 B2 FA C8 79 F2 3A FF 10 4D 05 ED With this key we can get a few chanall.we canot get PPV and some others chanalls. thanks
Ather Ahmed Bronze Member Username: Ather_da_don Mississauaga, Ontario Canada Post Number: 18 Registered: Oct-07	Posted on Wednesday, October 31, 2007 - 11:58 GMT Anyone need new dish keys, bin files or converting files? Visit ~~www.dishkeyz.blogspot.com~~
AGF Bronze Member Username: Agf Post Number: 13 Registered: Aug-06	Posted on Wednesday, October 31, 2007 - 12:46 GMT Bubbus, One trick to upload the bin file is after you have connected the receiver to the computer and have the bin file on the loader, click on the write option on the loader on your computer and then switch the receiver on. This will load the bin file. All the best
Dr DSS Silver Member Username: Dr_dss Post Number: 195 Registered: Sep-07	Posted on Wednesday, October 31, 2007 - 12:50 GMT Ather Ahmed I check your site a few times yesterday and You are SLooooooooooooooooooooow on updating the keys hours behind other sites.
Nalin Nyda Gold Member Username: Nydas Post Number: 4375 Registered: Jun-06	Posted on Wednesday, October 31, 2007 - 14:53 GMT Pansat 2500 to 2700 conversion. First time conversion, use jvvh 205 or jvvh 208 BIN. Get ready to write and using one hand on receiver back turn on switch and immediately click on write. Wait WAit WAit for B75 to appear. and then wait even more. For later upgrades to newer BIN, do the same as above except that you click on write soon after "b" appears. Latest BIN is jvvh 218 All files have to be unzipped before use. This applies to loaders, and BIN files. Read the instructions carefully. Most of the problems arise from haste. The following sites have a lot of files and instructions. [link removed] [link removed] ~~http://www.totalfta.com~~ ~~http://www.future-fta.info~~
RTAP Silver Member Username: Rtap FL Post Number: 814 Registered: Jan-07	Posted on Wednesday, October 31, 2007 - 16:49 GMT Dish Network Main - 0101 [Last update: Tue. Oct 30, 5:34 PM CDT] 86: 2B D6 F6 C6 E5 B2 FA C8 79 F2 3A FF 10 4D 05 ED 96: 0C 7A AE 74 38 74 E1 27 18 51 F8 1A 5F 19 96 8F New Dish Network New PID - 0106 [Last update: Tue. Oct 23, 1:14 PM CDT] 86: D6 9E 74 4D 0A CB ED 62 42 C6 A5 C1 AF AC BE 38 New 96: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Satsmurf.com Bell ExpressVu Main - 0901 [Last update: Wed. Oct 31, 11:40 AM CDT] 86: 47 FB 44 74 A3 FB FC 89 D3 08 FB F3 12 FB 6B D7 New 96: 34 96 C6 F7 62 EA 97 D7 89 CC 37 1B 33 72 F7 B2 Bell ExpressVu PB - 0905 [Last update: Thurs. Mar 15, 2:01 AM CDT] 86: B7 2F 03 35 70 4A CD B0 6D 43 33 59 92 E2 1D F3 96: D5 51 BA FE 58 50 BE 61 A4 BD 09 F3 54 4F C5 FC Bell ExpressVu HD - 0906 [Last update: Thurs. Mar 15, 6:17 PM CDT] 86: 8D 1A 1C F4 2C B9 7F 85 38 65 D6 7A 5D 59 5D 88 96: 11 FE 27 1D 89 9E D3 B4 DB 8E CB C8 10 D3 E7 F7 Bell ExpressVu New PID - 0907 [Last update: Tue. Oct 30, 3:47 AM CDT] 86: 89 E0 33 90 CD BA DA D0 3E 04 C6 B4 59 A7 84 7B 96: 60 B8 E2 A1 25 9F 09 6F FB 9B 30 FF 61 95 EE 65 New
satgrl Silver Member Username: Satgrl Post Number: 339 Registered: Oct-07	Posted on Wednesday, October 31, 2007 - 16:58 GMT RTAP ONE IS FROM DSS_KEYS AND ONE FROM UR POST ABOVE WHICH ONE IS CORRECT? THE SECOND NUMBER IN 00 HAS CHANGED!.. Bell ExpressVu Main - 0901 [Last update: Wed. Oct 31, 11:40 AM CDT] 86: 47 FB 44 74 A3 FB FC 89 D3 08 FB F3 12 FB 6B D7 New 96: 34 96 C6 F7 62 EA 97 D7 89 CC 37 1B 33 72 F7 B2 47 7B 44 74 A3 FB FC 89 D3 08 FB F3 12 FB 6B D7 01: 34 96 C6 F7 62 EA 97 D7 89 CC 37 1B 33 72 F7 32
RTAP Silver Member Username: Rtap FL Post Number: 819 Registered: Jan-07	Posted on Wednesday, October 31, 2007 - 17:02 GMT my post above was from tvkeyzdotcom.and this is from dss-keys. D!SH 0101 - Last Update: 10/30/07 03:55 PM 00: 2B D6 F6 C6 E5 B2 FA C8 79 F2 3A FF 10 4D 05 ED 01: 0C 7A AE 74 38 74 E1 27 18 51 F8 1A 5F 19 96 8F B3V 0901 - Last Update: 10/31/07 10:53 AM 00: 47 FB 44 74 A3 FB FC 89 D3 08 FB F3 12 FB 6B D7 01: 34 96 C6 F7 62 EA 97 D7 89 CC 37 1B 33 72 F7 32
satgrl Silver Member Username: Satgrl Post Number: 341 Registered: Oct-07	Posted on Wednesday, October 31, 2007 - 17:04 GMT ok thnxs i guess it got updated now;)
RTAP Silver Member Username: Rtap FL Post Number: 820 Registered: Jan-07	Posted on Wednesday, October 31, 2007 - 17:07 GMT your welcome.peace
Bin Pro New member Username: Binpro Post Number: 7 Registered: Sep-05	Posted on Wednesday, October 31, 2007 - 18:05 GMT my receiver isn't auto rolling... Need a new DN key for 10/31/07 can anyone help?
ZO_DEE Bronze Member Username: Depalmaj Wa. USA Post Number: 47 Registered: May-06	Posted on Wednesday, October 31, 2007 - 18:06 GMT new keys ??? or what
Amber S New member Username: Amber551 Post Number: 3 Registered: Oct-07	Posted on Wednesday, October 31, 2007 - 18:07 GMT Can someone give me new dn keys? Thanks
ZO_DEE Bronze Member Username: Depalmaj Wa. USA Post Number: 48 Registered: May-06	Posted on Wednesday, October 31, 2007 - 18:07 GMT just DN up to old tricks for halloween guess a new bin will be soon man i just got 333 bin
cotton coots Bronze Member Username: K98 Post Number: 93 Registered: Jan-07	Posted on Wednesday, October 31, 2007 - 18:09 GMT mine didnot a.r. keys need d.n. keys plz
ZO_DEE Bronze Member Username: Depalmaj Wa. USA Post Number: 50 Registered: May-06	Posted on Wednesday, October 31, 2007 - 18:12 GMT i dont think keys will work its a new ECM and a bin fix will be the only fix for autoroll expect BL with a new bin soon i hope man no more east cost shows 2 night gotta watch cable
Bin Pro New member Username: Binpro Post Number: 9 Registered: Sep-05	Posted on Wednesday, October 31, 2007 - 18:13 GMT DN: 96: 0C 7A AE 74 38 74 E1 27 18 51 F8 1A 5F 19 96 8F New
Bin Pro New member Username: Binpro Post Number: 10 Registered: Sep-05	Posted on Wednesday, October 31, 2007 - 18:14 GMT it just the keys. I am back up.. BinPro
indopak Bronze Member Username: Indopak Post Number: 45 Registered: May-06	Posted on Wednesday, October 31, 2007 - 18:18 GMT my autoroll is rolling but its not working.. whats the new dn keys? someone please post them up.. thanks!!
ZO_DEE Bronze Member Username: Depalmaj Wa. USA Post Number: 51 Registered: May-06	Posted on Wednesday, October 31, 2007 - 18:18 GMT thanks man was stressin im back up this testing isnt as fun in morning when ur doing 420 alittle to early
ZO_DEE Bronze Member Username: Depalmaj Wa. USA Post Number: 52 Registered: May-06	Posted on Wednesday, October 31, 2007 - 18:19 GMT Turn autoroll OFF then it works any 1 thats getting continue autoroll
cotton coots Bronze Member Username: K98 Post Number: 94 Registered: Jan-07	Posted on Wednesday, October 31, 2007 - 18:19 GMT 4 d.n. put in o1 keys ; oc 7a ae 74 38 74 e1 27 . 18 51 f8 1a 5f 19 96 8f should have ppv t.v.
kardary Bronze Member Username: Kardary7 Nashville, T.N Post Number: 14 Registered: Apr-07	Posted on Wednesday, October 31, 2007 - 18:28 GMT hi any body have new keys please
juan Cavazos Silver Member Username: Silver1123 Mexico, DF Mexico Post Number: 321 Registered: Jul-07	Posted on Wednesday, October 31, 2007 - 18:32 GMT Turn autorolls off and enter keys manually. Again, DN is morphing keys, the 5F is being changed for DF.
RTAP Silver Member Username: Rtap FL Post Number: 830 Registered: Jan-07	Posted on Wednesday, October 31, 2007 - 18:37 GMT juan it worked.thanks.
juan Cavazos Silver Member Username: Silver1123 Mexico, DF Mexico Post Number: 323 Registered: Jul-07	Posted on Wednesday, October 31, 2007 - 18:42 GMT DN is testing again. Now they have all the channels in the same key. 101 is working for all channels, PPV, Movies, Variety... 86: 2B D6 F6 C6 E5 B2 FA C8 79 F2 3A FF 10 4D 05 ED 96: 0C 7A AE 74 38 74 E1 27 18 51 F8 1A 5F 19 96 8F You should have the new 96 or 01 key, as shown, to be able to view all channels. DN might go back to the 106 key for PPV anytime. Turn off autorolls and enter correct keys. Wait for new bins.
paul eads New member Username: Pk4ever Alta loma, Ca U.s. Post Number: 7 Registered: Jul-07	Posted on Wednesday, October 31, 2007 - 18:45 GMT its not working for me, cnx duo says autoroll processing on all scrambled channels. Any 1 know if there are new bins coming soon?
cotton coots Bronze Member Username: K98 Post Number: 95 Registered: Jan-07	Posted on Wednesday, October 31, 2007 - 18:45 GMT does anyone know why 1# on the o1 keeps fliping from 5f to 1f and i put in 5f an it brings the picture in then goes out again then i re enter 5f to get it back whats going on help plz.
juan Cavazos Silver Member Username: Silver1123 Mexico, DF Mexico Post Number: 325 Registered: Jul-07	Posted on Wednesday, October 31, 2007 - 18:51 GMT Cotton: There is a modified stream in the satellite feed, that makes the keys change. In order to avoid the changes, turn autoroll options off. Paul: Check here for new bins: ~~http://ftabins.net/~~ Its free, just register. Search for the brand of your box. New bins shouls start appearing by tonight for Pansat, and the rest will follow in the next couple of days
J. Bronze Member Username: Majikone Post Number: 11 Registered: Jun-06	Posted on Wednesday, October 31, 2007 - 19:00 GMT Hi Any keys for the BEV?? Thanks
fahad New member Username: Desiinfluence Canton, Michigan America Post Number: 9 Registered: Oct-07	Posted on Wednesday, October 31, 2007 - 19:00 GMT allrite guyz...i have converted my FLU to pansat2700a...everything working great...except...wen i m watching 61.5...my signal get lost for 119...in order to fix dat...i have to keep turning it off from da back and den turn it on back..den it starts working...does anyone know...y its behaving like dis..???
indopak Bronze Member Username: Indopak Post Number: 46 Registered: May-06	Posted on Wednesday, October 31, 2007 - 19:04 GMT when i went to the code section i already ad the new key in it, but i had to change the one letter cuz it was wrong.... after i cahnged it my channels were back, but after around 5 mins that same letter goes back and ihave to change it again ot make my channels work, why? what shoudl i do?
Bigga New member Username: Bigga123 Post Number: 4 Registered: Sep-07	Posted on Wednesday, October 31, 2007 - 19:34 GMT Good Good

« Previous Thread Next Thread »

Archive through October 31, 2007

Main Forums

Forum Help

Follow Us