Seting up a " 5 LNBF Holder"

 

Bronze Member
Username: Chinny

Post Number: 13
Registered: Jan-07
I want Dishnet 119 and 110. I want Bell. I want International Stations.


1. Can I have all of these stations on 1 dish using a bracket holder?

2. Will all the signals come in clear?

There is a store in kitchener ontario with hardware for all my needs. http://www.kwstore.ca/

When I called them they gave me a little bit of information, but then said they were too busy to answer all my questions and hung up on me.

I was wondering if anyone currently has a bracket on their dish and if you get all these channels that I want?

here is the website with the pictures of the 5 LNBF Holder.
http://www.kwstore.ca/product_info.php?cPath=68&products_id=998
 

Bronze Member
Username: Chinny

Post Number: 14
Registered: Jan-07
has ANYONE ever tried this? or have a bracket for atleast 2 lnbf's?
 

Silver Member
Username: Tapeman

Post Number: 588
Registered: Oct-06
I personally never tried it
But this is the kind of stuff I like to test

My guess it may work with a phase 3 DTV
by replacing middle LNB and add 2 extra LNBs on each side

Or perhaps a 35" super dish
Your Sat aiming and elevation/skew MUST BE BULLS EYE
NOT FOR A NUBIE more for an expert installer
a lot of trial and errors (sat finder, install/setup 1 at a time)
Upload
 

Silver Member
Username: Tapeman

Post Number: 589
Registered: Oct-06
Upload
 

Bronze Member
Username: Chinny

Post Number: 15
Registered: Jan-07
So i'm taking it king tapeman, you havent tried this before.. im just curious.

i know i have seen a 119 and 110 bracket on a dishs in my area before. im pretty sure i can do this. my friend who got me into this stuff says he's even taped 2 lmbf's together to get the 110+119 on 1 dish.

Upload

i was just hoping i can get

119+110+bell OR
119+110+international channels

thats the BIG question i want to know. :-)
 

Bronze Member
Username: Chinny

Post Number: 16
Registered: Jan-07
Does ANYONE has this and it works with regular circle dishes?
 

Bronze Member
Username: Fattay

Post Number: 12
Registered: Jan-07
My Question, you only have 4 diseqe selection in sat set-up, so what do you do about the xtra lnb setting?
 

Bronze Member
Username: Fattay

Post Number: 13
Registered: Jan-07
My Question, you only have 4 diseqe selection in sat set-up, so what do you do about the xtra lnb setting?
 

Silver Member
Username: Tapeman

Post Number: 596
Registered: Oct-06
I don't think you'll find more than 1 or 2 people tried it
Most people will give-up 101 or 82
If you got 2 outlet of your LNB and 2 receivers
You'll do 4 sats on DISEqC and other selctive 4 on another DISEqC

You can tape or strap LNBs as long as they are pointed to reflected dish

See "King's Corner"
Post 138
https://www.ecoustics.com/electronics/forum/home-video/322149.html

Also Post 354 and 355
https://www.ecoustics.com/electronics/forum/home-video/300311.html
 

Silver Member
Username: Big_fat_j

POTTSVILLE, STONEYTOWN GREEN-LAND

Post Number: 344
Registered: Aug-06
You can have 8 lnbs by using a 22hz tone switch and (2) 4 port diseqc switchs.


Upload
 

Silver Member
Username: Tapeman

Post Number: 604
Registered: Oct-06
Thank you Herb
Using 1- SW-22 with 2-DISEqC switchs
"King's Corner" post# 168

Make sure you set your 22K Hz if you use the switch
 

Bronze Member
Username: Cartier1

Post Number: 30
Registered: Feb-07
using globecast dish i made myself the braket . it's not hard at all. you can also use 82 ans 91 . if u got problem with limited port using diseqc use the twinlegacy lnb for 110/119 this way uou save one port and u can use all 5 sat with the diseqc . Upload
 

Silver Member
Username: Crazy_greek

Post Number: 681
Registered: Jul-06

Hey chinny
To hit all these Birds and many more.
All you will need is a motorized Dish.
A) 100 cm Dish.
B) Invacom QPH-031 LNB.
C) 2X1 DiSEqC Switch.
D) Stub Rotor HH100.
Time and Patience
 

Silver Member
Username: Letmeon

Post Number: 137
Registered: Mar-06
Saw this assembly. I guess it gives better adjustment of the LNBs. Could be used on any satellite combo (almost), they have to be near each other. LNBs are adjustable in all axis .Upload
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us