devlin | info for newbies please..from flashing loader with right program to how to a card.......we all must start somewhere...thanks | |
anthony L. Unregistered guest | i have a reader that says ul4s reader and a hu card the card was program before.do i need a NEW card or will this one work. i joined one of those clubs with the private scripts and bins but i still can't get it to work.the club won't even respond to me emails | |
New member Username: JpcrackerjackPost Number: 1 Registered: 02-2004 | Where can i find good scripts for free? | |
Jonny fingers Unregistered guest | Why do I need basic service to program my HU card??????? | |
Bronze Member Username: BluezPost Number: 18 Registered: 12-2003 | you dont you can get freeware at several forums on the internet but if you have basic service you can add everything else and it will not get blacklisted because the bin is subscribed,the 3m will still get hit and blackout so you will have to load new 3m on your subscribed bin,but if you put a good activation file on your basic service it can last monthe depending on the teirs. or you can use freeware but you have to have some basic knowledge of programing and load your card once to twice a week,or pay a site and get the programs emailed to you when they go down freeware at dssrookie.com dsscentral.net dssforums.com dsseverything.com |
|
Bronze Member Username: BluezPost Number: 20 Registered: 12-2003 | Step one is unzip winex 5.0 and all its ini files in the zip to its own folder and name it winex5.0(because there are other versions). Most public unloopers will work with 5.0 and for every public winex you download unzip all contents into this folder. Loader must be flashed with ul4s 1) Open WinExplorer 2) Click on Configure 3) Then Program Parameters 4) Under Quick Settings pick Unlooper (biggest cause of this error message!) 5) Set Com Port to 1 6) Data Baud should be 115200 7) Reset Baud should be 115200 8) Parity should be None 9) Rec Timeout should be 200 10) Byte Delay should be 0 11) Reset Delay should be 0 12) Stop Bits should be 1 13) Under Byte Conversion put the dot on Direct 14) Do not check Flush Echo Bytes 15) Do not check Flush Receive Buffer Before Writes 16) Click the advance tab 17) No dot in No Resets 18) No dot in ISO Reset (Expect a ATR) 19) Put Dot in Device Reset (No ATR) 20) No check in Ignore Receive Timeouts 21) DTR should be Low 22) RTS should be High 23) Toggle this line for reset should be DTR 24) Click the program settings tab 25) Allow Multiple Instances should be blank 26) Associate WinExplorer Files Should be checked 27) Batch Step Mode should be blank 28) Log Transactions should be blank 29) Display Fuse after Each Script should be checked 30) Decimal should have a dot 31) Display USW After Each Script should be checked 32) Decimal should have a dot 33) Click Save then ok then yes 34) Now close the configuration window by clicking OK To run each program can be done by using the icon for each individual program or once you have used each program once you can use the recent file window in the file toolbar thus making it easier to open each program without closing the whole window. Or you can click run script and the folder window will appear for you to choose which program you want to run. I use recent files most of the time to run program simply click the icon that is a little hand holding a piece of paper(run script) then follow program instructions. |
|
Bronze Member Username: BluezPost Number: 21 Registered: 12-2003 | how to hu
|
|
Bronze Member Username: BluezPost Number: 29 Registered: 12-2003 | to figure out which com port you are pluged into
keep posting to keep this on top |
|
Anonymous | I just switch service to Directv and,I was wondering can anyone please explain to me what equipment I need to burn my Directv access cards. Please be patients with me if I ask some silly question. | |
msacricket Unregistered guest | where can I get free & good Bins or Fixes? Thanks | |
Anonymous | Where is the safest place to buy a programmer and wich one is recommended? | |
John Smithson Unregistered guest | Where can i find software to program p4 cards? | |
Bronze Member Username: BluezPost Number: 32 Registered: 12-2003 | unlockcards.com but the rumor is its a scam |
|
Bronze Member Username: BluezPost Number: 34 Registered: 12-2003 | for the bin beggers thease are public so who knows
|
|
Bronze Member Username: BluezPost Number: 38 Registered: Dec-03 | all the info anyone ever needs is right here keep posting to keep it on top |
|
Bronze Member Username: DtvmasterUsa Post Number: 27 Registered: Jan-04 | Dtv Programmers for sale 89.99 shipped 3 days Priority In the usa Free with tracking . Email dtvmaster@aol.com I have many available These are custom T6 Hu Card loaders . They are quality Loaders and come with powersupply and all cables. Add 15.00 per Newbee cd includes software flash utility and read me files so u can do it ureself without the hasstle of emailing and depending on others .WE accept paypal westernunion Cod orders in the usa . and Moneyorders us and international. Please email dtvmaster@aol.com THANKS AGAIN Hu cards recievers and dishes available everyweek also sell dishnet programmers at 99.00 with software cd free . Dtvmaster@aol.com Email me guys and gurls |
|
Bronze Member Username: BluezPost Number: 43 Registered: Dec-03 | freeware just follow instructions
|
|
Anonymous | How to flash card? | |
riverjohn Unregistered guest | where can i find free bins to load to my hu card | |
New member Username: LearningPost Number: 6 Registered: Apr-04 | i get a error 429 when starting hu, what did i do wrong, help. thanks. | |
cali777 Unregistered guest | all this stuff for the hu is pretty much pointless, the hu stream is almost gone & today(4/27/04) is supposed to be the complete shutdown..anyways if you program your hu you can still get like 8-10 channels..Good Luck.. Ps:slj install renstall your extremehu support files, but i would get familar with Winexplorer cause Extremehu is going to be obsulete in a matter of days..I promise you |
|
New member Username: LearningPost Number: 7 Registered: Apr-04 | thanks for response cali, was just starting and this is happenning, i know it is going down, but was still going to try to start learning some of this stuff as future references. thanks for the ups on using winexplorer i will mess with it today. if you have any other useful hints would appreciate. also in cali. | |
Unregistered guest | I got an error message "Error: V6.1 Not Supported" when I tried to clean my card by using Extreme HU 3.5a, and the ATMEL code shows "V6.1". Does any one know what's worng ?. Do I need to change my loader ? |