Kbox hero help

 

New member
Username: Barcham

Glenview, Il Usa

Post Number: 4
Registered: Aug-06
my kbox hero shows H1 then now power after laoding B180 factory file any solution from the experts ?
 

Platinum Member
Username: Plymouth

Canada

Post Number: 11763
Registered: Jan-08
Sam

Read this thread: https://www.ecoustics.com/electronics/forum/home-video/601718.html
 

New member
Username: Barcham

Glenview, Il Usa

Post Number: 5
Registered: Aug-06
thanks for your replay . I tried everything but it didn't work . the gray and the blak kable no luck . the problem is that the box is showing the H1 on the front then nothing else . there is a light red light on the standby which shows that there is some power there .
 

Bronze Member
Username: Chacha_chaudhary

Post Number: 22
Registered: Dec-07
Sam u got to change the Bios setting
Just follow the below and do the default setting and load the new file.

Kbox Plus And Prodigy Secret Bios
Turn Off Kbox From Back Switch

Now Press Channel + On Kbox Plus While Turning On Power From Back Switch
Leave Channel + Button Pressed

Now It Will Show Some Weird Display 01a6

You Need To Have Kbox Hooked To Tv To See Screen
You Will See First Option

1-system Test

If You Press Ok On Remote You Can Check Flash Here

2-live Test

3- Video Test

4- Audio Test

5-rf Modulator Test

6-front Panel Test

7-usb Test

8- Default Settings

With This Option If You Have Any Problems It Will Default All Settings To Factory

On The Prodigy Is The Same Steps Only You Press Volume + Instead Of Channel + (it Might Work With Channel Plus Not Sure)

To Exit Bios Just Turn Off From Back Switch And On Again
 

New member
Username: Barcham

Glenview, Il Usa

Post Number: 6
Registered: Aug-06
thanks for your replay . I tried that but it didn't go to the BIOS . it is showing no signal . I tried with chanal + and with audio + but it didn't work . what might be the reason ?
 

Bronze Member
Username: Chacha_chaudhary

Post Number: 23
Registered: Dec-07
Try it several times just after turning it on

Try these combos, dont use the Remote

Standby and volume + together
Standby and Channel plus together

If it goes 01a6, press 8 on remote

good luck

I tried it just now and it worked
 

Platinum Member
Username: Nydas

Post Number: 16744
Registered: Jun-06
sam bacham: You are right. It can get very stubborn, and you start getting an ache in the wrist.
If you can get it to factory service,, just install the first factory Bios on it and give it to them!
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us