After follow Nalin still getting F on PUFF


Bronze Member
Username: Masab911

Post Number: 36
Registered: Oct-07
I have delete all the ch. list factory reset and then bin 204 but still stick on F on my reciver... Need help

Platinum Member
Username: Nydas

Post Number: 13914
Registered: Jun-06
After deleting channels and resetting, try loading 299 or 301.
Also look at deki's instructions

Bronze Member
Username: Masab911

Post Number: 37
Registered: Oct-07
ok after 299 installed i am back on track should i try to install 204 ? or how to clean memory please step by step process Nalin

Bronze Member
Username: Vs77

Post Number: 12
Registered: Aug-07
After loading 204 and getting on the ON - i am unable to do the blind scan on Echo 7 and Echo 8.1 - it just does not find any transponders?

Any clue? what should i be doing next?

Bronze Member
Username: Masab911

Post Number: 38
Registered: Oct-07
[link removed]
working for me

New member
Username: Abs_qur

Post Number: 10
Registered: Aug-07
Guys, Please follow Nalin's instruction...and do you homework...




I just did that and it is working...
Please Just, first delete all channels and do a reset, and load 204 bin...then re-add channels with channel master...That is what I did....

Silver Member
Username: Jkmago

Post Number: 269
Registered: Nov-07
Just need two bins and download from Nalin website

UKR Flash fix and Fwank 204 PUFF

First run UKR Flashfix and wait for PUFF to appear and then switch off and switch on and hit write as soon as p appears and wait for On to appear,
do antenna setting and Blind scan

« Previous Thread Next Thread »

Main Forums

Today's Posts

Forum Help

Follow Us