Satellite EchoStar 3 61.5 W Nimiq 1, 3 91.0W LNB Power ON ON LNB Type Standard Standard LNB Frequency 11250 11250 22KHz Off Off TP Frequency 12297 12224 DisEqC 1.0 Port 3 Port 2 Motor Off Off Legacy SW None None
When I scan for Echostar3, I only get B*V channels and no Indian channels? could someone please help me.
Also, I am missing CBC and CTV newsnetwork channels. I have deleted all the channels and scanned a coupple of time but am having problem as explained above. Please help
Yesturday i lost many Tp on Dn and it come back whis this solution:
Go in Menu System information Code Menu Select Nagra Down arrow then select 00 01 00,01 01 00 and 01 06 00 and delete those 3 dish provider with "F3" on remote and load latest bin file, save and exit, wait that the autoroll found keys and all Tp come back.
DANGER Please disregard 13 year old White hawk comments This egyptian kid likes to play He does not belong to this forum "ad v, DO NOT TRY A) Factory Setting B) Blind Scan Consider yorself warned about all his childish games
Real solution from King:
Yo have a bad D-switch or wrong setup/wiring I would by-pass D-switch By temp run a F/F coupler connecting 61.5 LNB straight to receiver Yo'll now get 61.5 if yo haven't change settings Keep in mind to change TP freq to obtain signal if necessary
for E3set Satellite EchoStar 3 61.5 W Nimiq 1, 3 91.0W LNB Power ON ON LNB Type Standard Standard LNB Frequency 11250 11250 22KHz Off Off TP Frequency 12326 DisEqC 1.0 none Motor Off Off Legacy SW None None only 60channels for the DN i dont see the667and 576missing from the list
Missing channels is one thing and scanning to get different satellite is another
I see many people reporting missing channels due to migration to another satellite like 118.7 or it could be dropped out or possible due to ECM etc.
I sent yo a reply cuz yor initial post is yo scan D#N and yo get B#V As far as why yo can't get 2 channels on 61.5 I strongly belive they migrated to another satellite like 118.7 Maybe Plymouth or Nalin can be familiar with those 2 channels
I have Dishnetwork and BEV dishes. Echostar is pointing to 61.5W Nothing has been changed w.r.t to switch or settings. Everything was working fine until 1st Oct and since then am not getting any Indian channels.
Thank you all for your responses. But the problems still remains.
Plymouth and kirubaaaaaaaaaaa, I tried both your suggestions and am still am unable to get the channels. I am baffled now. King Tapeman, It is just not 2 channels that I am not getting on DN, it is all the channels on it. Also, I am not getting some channels CBC, CTV news network etc. on the B3V also.
hubby just rewired all Sat's and switches and we can't get DN now at all. Nimiq is only working now .... Not sure if its the rewiring or if DN is down tho