Post Number: 5 Registered: May-08
GOT HOME NOTHING WORKING. CHECKED ALL CONNECTIONS. DID REBOOT,NADA.DISCONNECTED EVERYTHING, NADA.LEVEL STUCK AT 33% AND QUALITY IS 0%.ALREADY REPLACED CAPACITORS A COUPLE OF MONTHS AGO. ANY IDEAS ? TY IN ADVANCE
Friday, September 26, 2008 - 23:32 GMT
Post Number: 9 Registered: Oct-06
No signal on Fortec lifeltime all ppv. other chenels working except ppv have no signal.
Saturday, September 27, 2008 - 02:01 GMT
Post Number: 11907 Registered: Jun-06
Switch it off at back and switchon after a minute.
Saturday, September 27, 2008 - 02:44 GMT
Post Number: 6 Registered: May-08
FOUND PROBLEM. 4 YEAR OLD SON TORE CABLE OUT OF LNB AND PUT BACK ALMOST PERFECT. RECONNECT NEW CABLE AND ALL IS WELL. TY FOR THE HELP
Saturday, September 27, 2008 - 02:47 GMT
Post Number: 11 Registered: Oct-06
I did but no result.
Saturday, September 27, 2008 - 02:48 GMT
Post Number: 4167 Registered: Jan-08
Saturday, September 27, 2008 - 03:37 GMT Try LNB on standard
Post Number: 10 Registered: Nov-06
I have a pansat 2700a the bin files are loaded via a null modem cable from a 9 pin comm port from the laptop.I just bought a new laptop and it only has a 15 pin serial port, I adapted it to a 9 pin but get a message saying the loader does not recognize the port. can this be fixed anybody.}
Saturday, September 27, 2008 - 19:21 GMT
Post Number: 902 Registered: Aug-06
kenneth belk, i believe you need a USB to SERIAL adapter- get one with a installation cd--
Saturday, September 27, 2008 - 20:01 GMT after installation of drivers you would select proper comm port and use the usb to serial and the null cable to load the 2700. i don't think the 15 pin port can be used.
Post Number: 11932 Registered: Jun-06
On emore thing - always use a USB to serial Adaptor with its own software - Do NOT allow Windows to automatically load the drivers for it.
Saturday, September 27, 2008 - 21:34 GMT