2500 puff 287 help


New member
Username: Fta101

Somewhere, Fl Usa

Post Number: 4
Registered: Nov-07
I converted my 2500 to puff and loaded puff 287 and all i get is station scrambled.do i need to change keys or what.

Platinum Member
Username: Nydas

Post Number: 11542
Registered: Jun-06
Make sure that the DiseqC is set to 1.0 and not 1.1 - port 1,2,3,or 4 as appropriate.

Do a blind scan.

New member
Username: Danny07

Post Number: 7
Registered: Aug-08
Hi Need helpplz !!!!!!!!!!!!
I an getting signal on some channels on 119 and 118 with special LNB but it says scrambeld or bad channel using diseq switch with 2nd dish facing 148 and latest bin 287 on puff receiver. anybody help plz will appreciate it thanks

Platinum Member
Username: Nydas

Post Number: 11544
Registered: Jun-06
The last 3-4 Pansat 2700 and conversions BINs have two tyes of DiseqC settings.
1.0 - 1,2,3,4, none
1.1 - 1,2,....15, none

You may have to change these settings.
148 is usually on port 3 or 4. Check your antenna set up with the above in mind. If not successful, post full details of Antenna set up of each LNB.
« Previous Thread Next Thread »

Main Forums

Today's Posts

Forum Help

Follow Us