ok gents, i have a sv8000 i have 110 119 and 129 lined up with good strength and quality...i have a DP dual and a DP single set up at the dish ...DP single is 129, my question is how do i set up my diseqc switch...i believe i need to have one to get the 129 into the rcvr...sooooooooooo, i have a 4 in 1 out diseqc, do i need i diseqc and will this one work? basically can't figure out the single cable coming from the DP dual will work straight to the rcvr...but now i'm just trying to get the set up for the cable from the DP plus dual and the DP plus single...thanks in advance
ok so i found that i'd be better off connecting on of my DP+ twin lnbs and then connecting the DP single to the in connection on the DP+ and letting the inside switch do the work and run one line...