Need Help... Please!!!

 

Bronze Member
Username: Mrkhan

Post Number: 76
Registered: Oct-07
Hello,

I am having some problem with my quality, most of the channels are in good quality of 60% to 80%, but few channels are in bad quality, keeps on freezing and that quality is very low as 30% to 40%. How can I keep all channels in one good percentage of quality?

Thank you,

mrkhan
 

Bronze Member
Username: Mrkhan

Post Number: 77
Registered: Oct-07
Please can someone help me with my problem here? Thanx in advance.
 

Silver Member
Username: Ash64

Post Number: 114
Registered: Nov-07
its your dish direction.. AKA LNB skew.. I fixed this problem by physically adjusting the dish..while keeping the quality and level bars visible on TV. you may need to have a TV available close to dish while going through this excercise. Unless somebody else has a better idea, this is how I resolved my problem. For example I could not get GEOTV, I selected that particular channel on screen and slightly adjusted my dish, once I had 50% signal strength on GEO I tightened the dish at that point. Another issue is dish size itself. I also switched to a bigger dish before adjusting the direction. You can try this on your current dish first.
Good Luck !!
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us