in case the keys change b4 the new fixes are out for those that don't know how to do that yet....
Updating Keys
Ariza
1- Press Green button 2- Red button 3- Red button 4- Menu button 5- Press right arrow several times until you see nagravision 6- Now depend on the key that changed and it is active you must scroll down til proper key to be changed
Example: On 06/09/05 ECM key 01 is active. Scroll down to provider 000101 01 key line and enter xx xx xx xx xx xx xx xx (enter number with your # button in your remote and for letter follow code definition button on your TV screen) 7- Press OK for 5 seconds. 8- Exit,exit...........
700
1- Press Menu 2- Scroll Down to Parental Control, Press Enter 3- Press "i" key on remote, then enter pin number "2004" 4- Scroll down to Set Default Key, Press Enter 5- Scroll up to Nagravision, Press Enter 6- Press VOL Right twice, you will see Dish Network 7- Press CH Down once, then VOL Right Twice, you will now see Nagravision 2 displayed top left You are now at the key 00, Press CH Down once so you can edit the Key Data 9- Enter your new keys (write down the old ones to be safe) 10- Press Ok to store, then repeat with key 01 11- Press exit until you get back to tv, all channels will be available
Buzz
press MENU press ENTERTAINMENT press 7890 enter manual key
10 xx xx xx xx xx xx xx xx xx | 11 xx xx xx xx xx xx xx xx xx | <-- key 0 here
20 xx xx xx xx xx xx xx xx xx | 21 xx xx xx xx xx xx xx xx xx | <--key 1 here
Captain
1) Press EXIT button twice a Keys window will open "Current key info." to the right of the word "Index", you'll find the active Key to be changed so...Index: 0x00000001 means key01 is active Index: 0x00000000 means key00 is active
2) Press yellow button. Enter first half of key string. When you're done, go down to OK, and press. You'll be asked "Wish to save changed data?" YES (OK button) Push Yellow button again. Enter the second half of key string. Go down to ok. Save changed data. Now you're back to Keys window.
3) Push exit button
Conaxsat
CNX-V1
Menu + 9999 Key Manager, OK System, OK Provider, OK Key Index, OK Go down to the appropriate field and hit OK Use your arrows to navigate and enter codes.
Duo/Trio
Menu Scroll left to Keyworks OK Enter the Menu's by pressing OK Enter the keys as needed with the buttons as instructed on screen. Press ok on the options to save. Use your arrows to navigate and enter codes. Basically the OK button is your access into the menus. Pressing it on different options brings you to the next. To go back press exit.
CaptiveWorks
500s/600s/600s Premium
After the patch has been enabled: Main Menu-->Installation-->Patch Menu or 1- Go to a scrambled channel for that provider. 2- Press PAGE DOWN on remote 3- Press RED button on remote 4- Enter the current active key (for letters use CH UP/DOWN keys on remote and OK) 5- Select "ok" (under F) and press OK on remote ..at this time you'll have video and sound 6- EXIT
Co0lsat
4000 / 5000 / 6000
Enter 8282 with remote as if choosing channel to open CAS Menu. Use volume up and down button on remote to scroll to Nagravision Provider Id. Use channel up and down button on remote to scroll to different Key Slot IDs and Key Slots. Enter the keys. (Use the Info button for letters A-F . Press it once for A , twice for B , Etc and channel number key pad for number entries Or you can press OK and it will open a Keyboard selection type menu to enter keys.) When key change is complete, Press Exit and confirm key change save.
[10] XX XX XX XX XX XX XX XX <-- first half of key0 (86) here [11] XX XX XX XX XX XX XX XX <-- second half of key0 (86) here
[20] XX XX XX XX XX XX XX XX <-- first half of key1 (96) here [21] XX XX XX XX XX XX XX XX <-- second half of key1 (96) here
8000/8100
Press menu Press Advanced Then press 1234 Choose Nagravision Enter Keys (see sample above) Exit and Save
Digiwave
1- Press MENU 2- Scroll down to System Setting. 3- Press OK. If you see a red dot in the botton/left of your screen, go to step 5 4- Enter number 1004. A red dot will come out at ur bottom left. YOU DO NOT NEED TO DO THIS STEP w/ lastest bins. 5- Press red button (audio). 6- Press right arrow until NAGRA appears in the first line. 7- Down arrow up to Provider and right arrow up to 0001. 8-Now scroll down to first key line and press OK. scroll to the letters and number and enter Key 00 9-Scroll down to second key line, press ok. and enter key 01 10- Scroll To Save Key 11- Press OK 12- Exit and Enjoy
Extremeview
Magnum
Go to the main menu Select the Embedded CAS and choose softcam. Select the set of keys that you want to update (01 OR 00), Provider Name, Provider ID & Provider Index. Select the set of keys that you want to update (00 OR 01) Using the on-screen keyboard, type in the new keys Once you have completed the new key entry, click on the update green button on the remote and then select yes to update button. Exit and watch tv.
MVidea
Press menu Enter = 8888 and the code edit menu appears Press the blue button for more Press the yellow button for nagra2 Enter Keys Exit and Save
Neusat
SP6000 / SP6000 Premium
1- Press zero on the remote and that will take you into the menu where the keys are. 2- Set Encryption system (nagravision for dish or bev) by scrolling left or rite with the remote. 3- Then scroll down with your remote to the provider name. 4- Press OK button once on the provider you wish to put keys in for. This will take you to the keys. 5- Scroll to the line you want to edit and push the blue button and a box will pop up for you to put the keys in on the line you highlighted. (the key number will be at the top that you are editing so when you scroll to the first number or letter you want to change push ok then the next number or letter you want push ok and so on and so on until you have the whole key changed to the numbers you want) 6- After you get the keys all put in for the line you are editing push done and it will save it. 7- push exit and watch tv To set keys at default after loading a binfile: 1- push the zero on your remote control 2- the keys menu will pop up. and at the top in the CA System line it should be on nagravision, if not scroll left or right untill you see nagravision. then push the blue button on your remote and it will be set at default. 3- push exit button and wait untill it finds the keys and watch tv.
Orasat
1- Press 6969 with your Orasat remote control. 2- Press COLOR BUTTONs for desired CAS(Video Encryption) on your remote. (Red for SECA, Yellow for Viaccess,Green for Irdeto, and Blue for Nagravision) 3- Now you are in Code Edit Screen. Provider C10100 is BEV and 010100 is DN as you can refer following figures. Number 1 & 2 are BEV Nagravision 2 Key values. (Index 00 & 01) Number 3 & 4 are DN Nagravision 1 Key values. (Index 00 & 01) Number 5 & 6 are DN Nagravision 2 Key values. (Index 10 & 20) 4- Once you choose Provider and Index to change Key value, press OK button. Then small pop-up screen comes out for entering new key. 5- Enter index and new key using the number pad on the remote or the on screen key pad.
Pansat & Clones
Pansat 2500, 2700 & Clones
press MENU press Parental Control press Second Pin and enter 0000 press NAGRAVISION 2 scroll to your desired Provider enter Key Data for Key Number 00 (aka 86) Press OK to Store Scroll up to Key Number field and then right arrow to change to 01 enter Key Data for Key Number 01 (aka 96) Press OK to Store Exit out and your done
Sonicview
SV1000 / 4000
press MENU press ENTERTAINMENT press 7890 enter manual key
10 xx xx xx xx xx xx xx xx xx | 11 xx xx xx xx xx xx xx xx xx | <-- key 0 here
20 xx xx xx xx xx xx xx xx xx | 21 xx xx xx xx xx xx xx xx xx | <--key 1 here
PVR1000 / SV8000HD
Hit Menu Enter 7890 to enable the code menu Hit Code Enter updated keys Save Watch tv.
Satopia
Press Menu Press Red Button Enter keys carefully in each line. Exit and save.
Satpros
While watching tv on a scrambled channel, enter 6969 Press blue key on remote control Use channel down, scroll down to provider number index 10 Press ok Enter (10) xx xx xx xx xx xx xx xx Press ok
Scroll down to provider number index 20 Press ok Enter (20) xx xx xx xx xx xx xx xx Press ok
Scroll down to provider number index 11 Press ok Enter (11) xx xx xx xx xx xx xx xx Press ok
Scroll down to provider number index 21 Press ok Enter (21) xx xx xx xx xx xx xx xx Press ok Press exit and watch tv!!
Spacestar / Sonysat
Press Menu Choose Configuration - Embedded Cas - Nagra 2 - Then press idea Dish Part1. There you will see F1 & F2 Update F1 with the first half of the new key. Update F2 with the second half of the key. After updating the keys, press "EPG" to save then press "EXIT" and watch tv!
Viewsat
Viewsat Lite/Plat/Extreme
press MENU press INSTALLATION press CODE press NAGRA scroll to your desired Provider enter manual key
08 xx xx xx xx xx xx xx xx xx |<-- first half of key 0 (86) here 09 xx xx xx xx xx xx xx xx xx | <-- second half of key 0 (86) here
88 xx xx xx xx xx xx xx xx xx |<-- first half of key 1 (96) here 89 xx xx xx xx xx xx xx xx xx | <--second half of key 1 (96) here
Ultra / PVR7000
press MENU select User Setting select CODE MENU in CAS select NAGRA scroll down to next box and select your desired Provider enter keys (see sample above)
Xrica
Press Menu Choose Installation. Choose Key Edit. Enter keys carefully in each line. Exit and save.
Sonicview is up on 5 May fixes..ya may need to manually input keys into them, if AR goes down...also
Seems that some boxes are coming back on. Possible that ecm also hit the sub's. Try rebooting box from main switch then leave on channel 122 for dn to roll (630 for bev). If it works, great, if not wait for new fix.
Tooter and others that may read this thread I have nothing to do with LK .. I put up MY OWN POSTS because that is what I want to do not what LK or anyone else tells me to do GROW up and get over this Doreen and LK thing OK.. no offense to wards you LK but these people are way out dated in there knowledge about you and me.
tooter that proves nothing at all LOL look around the forum others are posting like crazy tonight looking for a fix ... grow up toots i thought you were past all this childishness guess I was wrong
just general info: my folks just rec'd their new cards today. they have 2 x bev 2700 and 2 x 3100 models. i have 2 x 3100 and i have not rec'd new cards. not that i'm really waiting for them but i know that they'll come...
Hi D...yeah it's been a while...i come and go..i'm working on other projects as well. their are taking a lot of time. leaves me with less time to spend here. i grab my fix and go...like a true junky...lol. how r u ? staying out of trouble?
