hey m styll having problems with my pansat. i did everythin the autoroll but styll channels r comin and goin. wats goin on? and btw i was gettin star + and star 1 for like a month now i've got all the channells back i thought the bin changed so how is it back? im confused can somebody help?
You should not have too much problem. If you keep autoroll off, and occasional enter keys manually when needed, you should be OK. What receiver and what BIN?
Zuna: My posts are by genuine Nalin Nyda. This fellow is a fake: Nalin Nyda New member Username: Nydss Post Number: 2 Registered: Apr-08
There is a fake Nalin Nyda who has just posted. Always look and make sure the joining date and Platinum member status tally comfortably as in this post.
0k Nalin its styll not workin i've trie the autoroll thing ..its styll comin for 2min and then the chanells go scrambled accept star + and star 1 .. so wats goin on??
Here's the skinny. Your bin is old and you will need to rescan channels every time you load a new bin. Bev first hard boot then DN. Every bit/byte of that boxes memory is used up to make it work so from one bin to the next expect bugs. Deal with it best you can.
Zunna: 1. You have an older BIN file lothario version 260 (for conversions) running under b75 BOOT. You need to install the latest b75 BIN version 263. 2. Go to menu/Installation or Dish installtion (the top line) and then you will see Antenna setup as top line. On the right you will see 1-3 Selected satellites. Note this down. 3. Click on antenna setup. Go up and down the left hand menu and find one of the selected satellite. Note down the parameters for it that you see on the right side. 4. Do the same to all of the selected satellites. By saving this information, you will save a lot of time and headaches in the future. 5. Now exit out.
On the computer: 1. Make a directory "jvvh" in a comfortable area of your computer and 2. download the full_kit from the b75 section of
http://www.sharpc.com This software will eliminate rescanning next time you have to install a new BIN.