ViewSat 2000 xtreme
|
New member Username: Koki203Post Number: 3 Registered: Mar-08 | hi i am new here. i have a vs 2000 xtreme i use loader 2 when i try to load the new fix it does not work. nothing happens. in my receiver it says bootloader 0.0C and the new fix it says bootloader 0.0D what's the difference? | |
|
Gold Member Username: Donnie1973Post Number: 2859 Registered: May-06 | what cable are u using? are u pressing the pc-stb button THEN turning on the extreme from the back? |
|
|
Gold Member Username: KirankumarNO Bashing Post Number: 2513 Registered: Oct-07 | get loader from viewsat site | |
|
Gold Member Username: KirankumarNO Bashing Post Number: 2514 Registered: Oct-07 | use loader 1 download from [link removed] |
|
|
New member Username: Koki203Post Number: 4 Registered: Mar-08 | dantetn i am using serial cable, yes i clicked pc-->stb button and i turn on the box from the back. but instead download the fix it opens as normal, like it's not detected |
|
|
New member Username: Koki203Post Number: 5 Registered: Mar-08 | African i already got it from vs site and same. i don't know what i am doing wrong |
|
|
Gold Member Username: Donnie1973Post Number: 2862 Registered: May-06 | what do u mean it opens as normal? does another box pop up that says sending and resending? do u get any errors when u open loader 2? try loader 1 like african suggested. I never had to use loader 1, but who knows. u sure u have a null modem cable? did it come with the reciever? | |
|
Gold Member Username: KirankumarNO Bashing Post Number: 2515 Registered: Oct-07 | have you ever been able to download with the cable you have? if not try using another cable |
|
|
New member Username: Koki203Post Number: 6 Registered: Mar-08 | dantetn i don`t know if it s a null modme cable, no, it did not come with the receiver. when i said it opens as normal i mean it shows the last channel i saw |
|
|
New member Username: Koki203Post Number: 7 Registered: Mar-08 | African yes, i have a pansat box and a c00lsat working right now, in both i used the same cable that i try to use with the vs xtreme. |
|
|
Gold Member Username: Donnie1973Post Number: 2863 Registered: May-06 | after u open loader 2, (with reciever off from the back) u press pc-stb, turn on from the back, u should see a progress window. 0-100 percent. it will finish in about 3 mins. Does it do this? If so, u may not have the satellites scaned in right. |
|
|
Gold Member Username: KirankumarNO Bashing Post Number: 2517 Registered: Oct-07 | mario, go to radio shack and buy male to female null modem adopter and hook it at the end of your cable,about $8 |
|
|
Gold Member Username: Donnie1973Post Number: 2864 Registered: May-06 | no need. u have the right cable if it does the pansat 2700 | |
|
New member Username: Koki203Post Number: 8 Registered: Mar-08 | dantetn when i pressed the pc--stb button i see the zmodem window with the transfer % but it does not move from 0% |
|
|
Silver Member Username: BirdwatcherPost Number: 745 Registered: Jul-06 | you need to use the cable that the box came with!! | |
|
Silver Member Username: AbjPost Number: 577 Registered: Feb-06 | try restarting your computer and get the files from different source. Where did you get your file from? also do a factory default and than load your file.. Some receivers are having hard time loading the file to receiver. Make sure you have your setting written down so you will know when you do your antenna setting.. Good luck... |
|
|
Bronze Member Username: LavaboyPost Number: 23 Registered: Feb-06 | Not sure but you probably need a different cable? My Pansat Clone uses a different cable from my Viewsat. | |
|
Platinum Member Username: NydasPost Number: 10187 Registered: Jun-06 | mario: dantetn's only qualification is ability to talk profanity to others for no reason. He cannot give proper instructions. You need Loader 2 - NOT 1. Get a M/F DB9 null adaptor from Radio Shack. With this adaptor you do not need to know what cable you have. Try loading with the adaptor in series (and the cable in) and without the adaptor. You may need to install factory BIN, after so many failures. Make sure you follow instructions properly. [link removed]
|
|
|
Gold Member Username: Donnie1973Post Number: 2865 Registered: May-06 | hey little nalin, i never said use loader one dear. And nalin, if he uses a null modem adapter with a null modem cable, it becomes straight thru jackazz. So, if u use that adapter, it DOES matter what kind of cable u have. After saying that, i didnt realize the clones use a straight cable. So if lavaboy is right that could be the problem. Sorry for steering u away from that when african suggested it mario. But remember, when u turn ur box on in the process is VERY important. |
|
|
Platinum Member Username: NydasPost Number: 10191 Registered: Jun-06 | Posted on Thursday, April 17, 2008 - 03:06 pm: by dantetn - Gold Member Username: Donnie1973 Post Number: 2862 "...do u get any errors when u open loader 2? try loader 1..." Blind skunk, dantetn: Get somebody to read your own posts if you can't read them. |
|
|
Gold Member Username: DoreenakadjOntario Canada Post Number: 1450 Registered: Dec-06 | If this is a new STB you should get at least four files before you start. LOADER2.ZIP An up to date Bin, DBPSW_060814ES_XTREAM.RAR A Satellite List, there are two files here. You need to pick the file that has the Satellites you want. Walace to unzip the files, you can get it here h**p:// J-TRACK SHOWING POSITION OF SATELLITES h**p://science.nasa.gov/RealTime/JTr.../JTrack3D.html FIND A SKEW h**p://www3.telus.net/rampage/skew.htm CLEAN AND PUT LUBRICANT ON YOUR REMOTE. Use ProGold G100P from Radio Shack part number 64-4337 |
UploadMain Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics