Whats the diference between 118.7 and 118.8 ?
|
Silver Member Username: LomnaPost Number: 198 Registered: Dec-07 | Wanna make sure that em buying the right lnb. |
|
Platinum Member Username: LklivesPost Number: 15400 Registered: Jan-06 | same same |
|
Silver Member Username: DaneeghaPost Number: 122 Registered: Oct-06 | The correct answer is .1  |
|
Silver Member Username: LomnaPost Number: 199 Registered: Dec-07 | Thank you sir |
|
Gold Member Username: KirankumarNO Bashing Post Number: 2495 Registered: Oct-07 | devin do you have any kind of dish right now ? if you do then set it up and see if you can get 61.5 and then move on from there go to |
|
Gold Member Username: PlymouthQuebec city, Quebec Canada Post Number: 1818 Registered: Jan-08 | The true degree is 118.75 Some say 118.7 and other say 118.8 |
|
Silver Member Username: LomnaPost Number: 200 Registered: Dec-07 | plymouth...thank you for the perfect answer to my question. |
|
Silver Member Username: LomnaPost Number: 201 Registered: Dec-07 | African.....I tried 61.5 doesn't work for me. |
|
New member Username: Salman91Post Number: 3 Registered: Oct-06 | what is the diffrence between 119w,118.7w echostar-7. Dish pointer showing same location of All. I have Cw600s, in my recever only 119w and Echostar-7. can i get all channels of 148 w on above 24" Elips dish. |
|
Gold Member Username: PlymouthQuebec city, Quebec Canada Post Number: 1972 Registered: Jan-08 | salman khan 119 is echostar 7 118.75 is Anik F3 You need use a special LNB for it This LNB in not round inside but oval and can receive signal on 0.25 degree width. Thats why you dont see 118.7 on your receiver. 148W dont give same channel |
|
Silver Member Username: MuchoPost Number: 199 Registered: Dec-07 | Anik F3 was launch on April 10, 2007 adjacent to Echo 7 @ 119.o*W a fraction of degree apart. If Dish Network Subscripters are interested in International Channels they can provide both Satellites with one dish and this special made LNB with two different eyes.  (Anik F3) Local Oscillator Frequency Low 10,750 GHz Circular Polarization. The other eye (Echo 7 @ 119.o*W) also Circular Polarization High 11,250 GHz.  |
|
New member Username: Salman91Post Number: 5 Registered: Oct-06 | Thank you very much Plymouth and white Hawk, of yours value able Reply. |
|
Gold Member Username: PlymouthQuebec city, Quebec Canada Post Number: 1980 Registered: Jan-08 | You are Welcome Salman |
|
Silver Member Username: LomnaPost Number: 229 Registered: Dec-07 | plymouth, white hawk, cuz my sv4000 doesn't have either 118.7 or 118'8 !!! in my other post "African" suggested me to use Anik E1 118 instead. Please suggest me what should I do? I may never get the signal if my rec shows anik E1 118 and I'm searching signal from anikf3 118'7 . |
|
Gold Member Username: PlymouthQuebec city, Quebec Canada Post Number: 1988 Registered: Jan-08 | Devin any receiver have 118.7 because you must use 1 special LNB for 2 sat you must use 119W This LNB can receive signal on 0.25 degree width the difference between 118,75 and 119 |
|
Silver Member Username: MuchoPost Number: 205 Registered: Dec-07 | plymouth, white hawk, cuz my sv4000 doesn't have either 118.7 or 118'8 !!! in my other post "African" suggested me to use Anik E1 118 instead. (YES, Select "Rename" from the menue. Change Anik E1 to Anik F3 by using the numeric keys. Now pull up lyngsat and enter all the TPs listed for Anik F3. http://www.lyng*sat.com/anikf3.html ............omit*....... |
|
Silver Member Username: LomnaPost Number: 230 Registered: Dec-07 | Thanks you both....I got it. |
|
Gold Member Username: PlymouthQuebec city, Quebec Canada Post Number: 1996 Registered: Jan-08 | Good news Devin I,m happy for you Guy |
|
Silver Member Username: LomnaPost Number: 231 Registered: Dec-07 | So,all you mean by using bigger dish and lnb cb2008a... if I get signal from 119w I will automatally get the signal from 118.7w without doing any kind of adjustments ????? |
|
Gold Member Username: PlymouthQuebec city, Quebec Canada Post Number: 1998 Registered: Jan-08 | The only adjustements is your dish You enter setup for 119 and it supposed to work. Buy a sat finder for dish align Adjust the skew first and elevation after adjust orientation. |
|
Silver Member Username: LomnaPost Number: 232 Registered: Dec-07 | Alright ..Thank you ! |
|
Gold Member Username: PlymouthQuebec city, Quebec Canada Post Number: 2000 Registered: Jan-08 | You are Welcome Devin |
|
New member Username: Salman91Post Number: 6 Registered: Oct-06 | I buy 33" Dish and dual LNB for 119 and 118.7 i scaned the chanels of 119 and 118.7. Problum is that in my recever cw600 premium don't have 118.7( ANIKE F3) in list, i scane all chanels on Ecostar 7 119w this satallite in my satallite list. on diffrent LNB Frequences, 118.7 is 11257 and 119 11457. i changed the frequency manuly by remote after that i see the channela, its not chang byself when i shift 118.7 to 119 and vicewarsa my recever showing unknown satallite 11.8. what i do. i need new factory bin of cw600spremium for update my satalite list. PLEASE GUIDE ME. thanks' |
|
New member Username: NydssPost :10419 Post Number: 3 Registered: Apr-08 | You should have no trouble finding my hole. I should not have to guide you.,,, |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics