Help-Lost Channels/Signal Viewsat Xtrm After Blindscan

 

New member
Username: Laguna

Post Number: 1
Registered: Apr-08
I did blindscan to get the new avail. channels. However, I later lost my internationals, and ppv and now it shows either autoroll or no signal. Any help is appreciated or how to update to get all channels back. Thanks.
 

Gold Member
Username: Plymouth

Quebec city, Quebec Canada

Post Number: 1607
Registered: Jan-08
1) try to do a hard boot(swtich off 10 secs rear panel)
2)Check your sat setup( change by itself)
3)do a factory default do a hard boot and load bin from dsstesterDOTcom, setup and rescan all sats.

If thats not work reply
 

New member
Username: Laguna

Post Number: 2
Registered: Apr-08
Sorry for stupid question, but what do I check for in step 2. I did not set it up so I don't know what to look for. Also, how to rescan all sats.

Thanks again.
 

Gold Member
Username: Plymouth

Quebec city, Quebec Canada

Post Number: 1611
Registered: Jan-08
Vincente
First, which sat you went setup?
Give me how many sat and LNB?
 

New member
Username: Laguna

Post Number: 3
Registered: Apr-08
I am in the Southwest. So 119, 148, and 110 I think are the sats. I did factory default and now I have no channels. I need to know how to start from scratch.

thanks.
 

Gold Member
Username: Plymouth

Quebec city, Quebec Canada

Post Number: 1619
Registered: Jan-08
Now load last bin 04-04-08

Who setup first time for you, maybe he can help you.
You dont know which LNB is on which com on your switch and what kind of LNB you have?
Which dish you have?

We need this info for setup your receiver.
 

New member
Username: Laguna

Post Number: 4
Registered: Apr-08
Thanks Plymouth. I think I got it...
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us