New member
Username: Dunadundun Post Number: 2 Registered: Apr-08
Posted on
Saturday, April 05, 2008 - 22:24 GMT I just installed a new dish for BEV. was able to scan all the channels for 91 but it is stuck on autoroll processing please help
Platinum Member
Username: Saqeeb9000 Post Number: 3068 Registered: Oct-07
Posted on
Saturday, April 05, 2008 - 22:29 GMT turn off the autoroll
New member
Username: Dunadundun Post Number: 3 Registered: Apr-08
Posted on
Saturday, April 05, 2008 - 22:30 GMT Thanks a lot for your reply sada. In that case I will need the latest keys for BEV, from where I can get those Thanks
Platinum Member
Username: Saqeeb9000 Post Number: 3070 Registered: Oct-07
Posted on
Saturday, April 05, 2008 - 22:37 GMT which rec do u have? may be keys are rolling , check first if new bin for what ever rec do u have its working for bev... let it autoroll for few minutes some times it take longer time to roll... if still doesn't work, do a hard boot (turn off ur rec from back switch , turn it on again).. it should work.. for new keys google it. type bev keys etc..but check first if new bin is good for bev, leave the autoroll on....
New member
Username: Dunadundun Post Number: 4 Registered: Apr-08
Posted on
Saturday, April 05, 2008 - 22:39 GMT I am using viewsat platinum and the bin is OK for both DN and BEV my DN is working fine. Thanks
Platinum Member
Username: Saqeeb9000 Post Number: 3072 Registered: Oct-07
Posted on
Saturday, April 05, 2008 - 22:49 GMT u are welcome......to get new keys. www.dishkeyz.tk
New member
Username: Dunadundun Post Number: 5 Registered: Apr-08
Posted on
Sunday, April 06, 2008 - 14:20 GMT Even with the new keys it says n0 audio or video I do not understatnd what is wrong - help
Diamond Member
Username: Lklives Post Number: 15199 Registered: Jan-06
Posted on
Sunday, April 06, 2008 - 14:53 GMT I suggest U reinput the correct Bev 91 antenna settings into the receiver, and do a reboot off/on with rear switch..
New member
Username: Dunadundun Post Number: 6 Registered: Apr-08
Posted on
Monday, April 07, 2008 - 02:12 GMT Thanks LK. I have done that but no luck. Is there anything I need to change in the receiver
Platinum Member
Username: Plymouth Quebec city,
Quebec
Canada
Post Number: 1551 Registered: Jan-08
Posted on
Monday, April 07, 2008 - 02:21 GMT dunadundun Is it on Bev dish? If yes go to menu installation antenna setup 0000 pin code you must see and setup this Satellite Nimiq 1,3 91W LNB Power - on LNB Type - standard LNB Freq - 11250 22 Khz - off Tp Freq - 12224 Diseqc 1.o - none Motor - none Legacy switch - none Exit and save now go to autoscan on scan start press OK save it It supposed to work now reply
Platinum Member
Username: Plymouth Quebec city,
Quebec
Canada
Post Number: 1552 Registered: Jan-08
Posted on
Monday, April 07, 2008 - 02:26 GMT Oh i see you have both Dn and Bev change Diseqc to the port you have connected your LNB for Bev How is the signal and Quality?
New member
Username: Dunadundun Post Number: 7 Registered: Apr-08
Posted on
Monday, April 07, 2008 - 02:33 GMT Thanks a lot Plymouth. I have already changed it to the right port Signal = 75 Quality = 82 I have also already tried the settings you have mentioned above. I must be missing something which I cannot figure out.
New member
Username: Dunadundun Post Number: 8 Registered: Apr-08
Posted on
Monday, April 07, 2008 - 02:35 GMT Total channels scanned is 427 and it also does show me the bell guide/information channel but none of the other channels work.
Platinum Member
Username: Plymouth Quebec city,
Quebec
Canada
Post Number: 1554 Registered: Jan-08
Posted on
Monday, April 07, 2008 - 02:46 GMT Explained none of the other channels work On which sat?
Platinum Member
Username: Plymouth Quebec city,
Quebec
Canada
Post Number: 1555 Registered: Jan-08
Posted on
Monday, April 07, 2008 - 02:49 GMT The autoroll can take 8 minutes to work.
New member
Username: Dunadundun Post Number: 9 Registered: Apr-08
Posted on
Monday, April 07, 2008 - 02:52 GMT On Bev I can only see bell info channel but nothing else. DN is working fine. I havw left autoroll running for many hours but nothing happens tried putting the keys manually as well.
Platinum Member
Username: Plymouth Quebec city,
Quebec
Canada
Post Number: 1556 Registered: Jan-08
Posted on
Monday, April 07, 2008 - 02:58 GMT dunadundun Note your dish sat setup and do a factory default Load last bin and setup and rescan all sat keep autoroll on Reply if it doesnt work
Bronze Member
Username: Little_bear Sudbury,
Ontario
Canada
Post Number: 32 Registered: Mar-08
Posted on
Monday, April 07, 2008 - 12:42 GMT Dun If you can pickup the Free Channel Bell guide/info.but not the paid channels check the keys. B3V 0901 - Last Update: 04/06/08 10:55 AM 00: 19 80 F0 71 D2 CA 0A 54.... CC 11 C7 A0 08 66 C9 6C 01: A0 8B 00 FA 25 1F FC DC.... 4D EF 45 28 C2 B8 74 5A
Bronze Member
Username: Dunadundun Post Number: 10 Registered: Apr-08
Posted on
Monday, April 07, 2008 - 13:46 GMT I have also tried the new keys. I cannot understand everything looks right yet it is not working.
Gold Member
Username: Plymouth Quebec city,
Quebec
Canada
Post Number: 1558 Registered: Jan-08
Posted on
Monday, April 07, 2008 - 14:05 GMT dunadundun try it: All viewsat box "Write your sat info before" Go to Code menu Select Nagra and on Dish 01 06 00 Dish 00 01 00 dish 01 01 00 Delete this 3 provider one by one with F3 on remote "NEW" do same thing with all provider on Bev provider 09 07 00 09 06 00 09 05 00 09 01 00 08 01 00 no need to delete keys switch off 10 secs on back panel "New" do a factory default and load last bin for your box turn autoroll on Keep on Bin and autoroll regenerete keys Resolve problem with lost channel , autoroll, freeze and search signal Do setup on each sat and auto scan on each sat after for recover all channel "Dont do a blind no need" "Dont load factory bin" Thats erase bad data in the box For box who lost channel and sat setup ENJOY TV TESTED and work fine New issue for problem on Viewsat Thanks Reply if it work Please
Bronze Member
Username: Dunadundun Post Number: 11 Registered: Apr-08
Posted on
Tuesday, April 08, 2008 - 00:57 GMT It still does not work Plymouth.
Gold Member
Username: Plymouth Quebec city,
Quebec
Canada
Post Number: 1571 Registered: Jan-08
Posted on
Tuesday, April 08, 2008 - 01:08 GMT dunadundun Try this bin: http://www.box.net/shared/6maoupn48g
Bronze Member
Username: Dunadundun Post Number: 12 Registered: Apr-08
Posted on
Tuesday, April 08, 2008 - 01:11 GMT Thanks Plymouth, will it work on viewesat platinum.
Gold Member
Username: Plymouth Quebec city,
Quebec
Canada
Post Number: 1573 Registered: Jan-08
Posted on
Tuesday, April 08, 2008 - 01:24 GMT No this is for Ultra Sorry
Gold Member
Username: Plymouth Quebec city,
Quebec
Canada
Post Number: 1574 Registered: Jan-08
Posted on
Tuesday, April 08, 2008 - 01:26 GMT Where you take your bin?
Bronze Member
Username: Dunadundun Post Number: 13 Registered: Apr-08
Posted on
Tuesday, April 08, 2008 - 01:50 GMT totalfta
Gold Member
Username: Plymouth Quebec city,
Quebec
Canada
Post Number: 1579 Registered: Jan-08
Posted on
Tuesday, April 08, 2008 - 01:55 GMT Try on dsstesterDOTcom choose viewsat files in left side Maybe! I take my bin there and work fine
Bronze Member
Username: Dunadundun Post Number: 14 Registered: Apr-08
Posted on
Tuesday, April 08, 2008 - 01:59 GMT It looks like it is not showing any paid channels
Gold Member
Username: Plymouth Quebec city,
Quebec
Canada
Post Number: 1583 Registered: Jan-08
Posted on
Tuesday, April 08, 2008 - 02:21 GMT Is it autoroll again?
Silver Member
Username: Brucelee Beverly Hills,
California
United States
Post Number: 144 Registered: Mar-06
Posted on
Tuesday, April 08, 2008 - 04:10 GMT I had the same problem and let it autoroll for a few minutes and in just two minutes or so it came back. I have VS Platinum.
Bronze Member
Username: Dunadundun Post Number: 15 Registered: Apr-08
Posted on
Tuesday, April 08, 2008 - 13:46 GMT Yes it is on autoroll again, I have left it on autoroll for hours but no change.
Gold Member
Username: Plymouth Quebec city,
Quebec
Canada
Post Number: 1588 Registered: Jan-08
Posted on
Tuesday, April 08, 2008 - 13:50 GMT Try to switch LNB with the LNB for dish. I dont know what doing with this problem. Sorry
Bronze Member
Username: Dunadundun Post Number: 16 Registered: Apr-08
Posted on
Wednesday, April 09, 2008 - 00:43 GMT Plymouth, I connected Ultra from my friend and BEV works fine. Is there anything I need to change on my Viewsat Platinum.
Gold Member
Username: Plymouth Quebec city,
Quebec
Canada
Post Number: 1631 Registered: Jan-08
Posted on
Wednesday, April 09, 2008 - 01:07 GMT dunadundun when i ask to you to delete all provider, do you delete provider or just the keys inside provider?
Bronze Member
Username: Dunadundun Post Number: 17 Registered: Apr-08
Posted on
Wednesday, April 09, 2008 - 01:10 GMT All providers
Gold Member
Username: Plymouth Quebec city,
Quebec
Canada
Post Number: 1632 Registered: Jan-08
Posted on
Wednesday, April 09, 2008 - 01:21 GMT I see this problem many times with Dn but on Bev never Go to a Viewsat seller them help you Without your box in hand, its very difficult to recover it. Try to unplug for 24 hours for delete backup memory Sorry