I have a problem
|
Bronze Member Username: Top2000doggPost Number: 95 Registered: Jul-07 | I am getting my channels and signal but after like 5 minutes the signal goes away can anyone tell me what the problem is? |
|
Silver Member Username: LuserPost Number: 177 Registered: Nov-07 | Sounds like a lack of power to dp+ lnb or DP switch. Are you using either of those? |
|
Gold Member Username: Saqeeb9000Post Number: 3018 Registered: Oct-07 | the problem is that ur dish might be moved a bit due to wind etc. soln get ur lazzy a\8ss up , grab a ladder and move the dish, when u are moving a dish, go to menu instalation, antenna setting, and check qulaity signal (green signal should be higher than 50).. u can check it even now , before moving the dish.. |
|
Bronze Member Username: Top2000doggPost Number: 96 Registered: Jul-07 | what is dp? |
|
Gold Member Username: Saqeeb9000Post Number: 3023 Registered: Oct-07 | how many dishes do u have? was there a wind/storm few days ago that might caused ur dish to move? |
|
Bronze Member Username: Top2000doggPost Number: 97 Registered: Jul-07 | one dish and I slightly moved it and the signal got better but now its moving all over the place but the level stays mostly at 82% and the quality is moving all over the place. it has never done that before what is happening? |
|
Gold Member Username: KirankumarNO Bashing Post Number: 2289 Registered: Oct-07 | what receiver do you have? |
|
Bronze Member Username: Top2000doggPost Number: 98 Registered: Jul-07 | megasat yt6688 a pansat 2500 clone |
|
Gold Member Username: Saqeeb9000Post Number: 3025 Registered: Oct-07 | what is your quality now.. when u press menu, installation, anteena setting. if ur quality is above 50% its good....... |
|
Bronze Member Username: Top2000doggPost Number: 99 Registered: Jul-07 | right now my echo 7/ku level is 82% and quality is 72% and Echo 8.10/ku 82% and quality is between 70 and 79% |
|
Silver Member Username: Top2000doggPost Number: 100 Registered: Jul-07 | and I also can't seem to be getting any cinemax channels and espn channels what is up with this? |
|
Gold Member Username: KirankumarNO Bashing Post Number: 2295 Registered: Oct-07 | check your switch,if it says dp34 then that is your problem,because it is not getting enough power constantly,replace with a chieta heavy duty switch |
|
Silver Member Username: Postergirl1Post Number: 217 Registered: Mar-08 | Check your keys LOOSER . lmao |
|
Silver Member Username: Postergirl1Post Number: 218 Registered: Mar-08 | A 2500,clone ? for real ? lmao And ppl wonder why. |
|
Silver Member Username: Top2000doggPost Number: 101 Registered: Jul-07 | wonder why what? |
|
Platinum Member Username: NydasPost Number: 9765 Registered: Jun-06 | Which conversion BIN do you have? I suggest you reload the conversion BIN if it is a PUFF, or convert to PUFF. If it is a PUFF_LZMA, use Chancy's CS_260T_LZMA(PUFF.) Bin. You can get all the current conversion BINs, loaders, instructions, conversion instructions etc from http://public.box.net/2500_full_kit |
|
Gold Member Username: Donnie1973Post Number: 2829 Registered: May-06 | make sure ur disecq settings are correct. sounds like theyt are swapped. rescan |
|
Silver Member Username: BirdwatcherPost Number: 736 Registered: Jul-06 | well the first thing is admitting you have a problem! |
|
Platinum Member Username: Donnie1973Post Number: 2830 Registered: May-06 | davidvanlikesitintheass... that is a problem... |
|
Platinum Member Username: RtapFL Post Number: 2104 Registered: Jan-07 | lol whats up dantetn.let me brighten your day.lmao  |
|
Silver Member Username: LuserPost Number: 184 Registered: Nov-07 | I was having same trouble with a 2500 converted and figured it was because I didn't convert to puff whatever. Could only scan one sat worth of channels more would cause signal loss. |
|
Silver Member Username: Top2000doggPost Number: 103 Registered: Jul-07 | I have b-75 not a puff do i need to change to puff and what is the difference between the 2? and rtap that pic made my day! |
|
Bronze Member Username: Tgyoung1Illinois U.s.a. Post Number: 34 Registered: Jul-06 | why doesn't 12457v have no quality..speed channel..no news channels..echo 7 lnb 11250 22 khz off diseqc #1 legacy sw none tp #1 12225 echo 8.10 lnb 11250 222 khz off diseqc # 3 legacy sw none tp #1 12224v |
|
Platinum Member Username: KirankumarNO Bashing Post Number: 2341 Registered: Oct-07 | terry young Bronze Member Username: Tgyoung1 Illinois U.s.a. Post Number: 34 Registered: Jul-06 Posted on Saturday, April 05, 2008 - 12:27 pm: Edit Post why doesn't 12457v have no quality..speed channel..no news channels..echo 7 lnb 11250 22 khz off diseqc #1 legacy sw none tp #1 12225 echo 8.10 lnb 11250 222 khz off diseqc # 3 legacy sw none tp #1 12224v here is what you need echo 7 lnb 11250 22khz off diseqc 1 tp ferq 12457 legacy sw none for echo8.10 same as above but diseqc change from 3 to 2 tp freq leave as 12224 once you adjust settings,save them and scan channels again |
|
Bronze Member Username: Tgyoung1Illinois U.s.a. Post Number: 37 Registered: Jul-06 | can't get diseqc 3 to changed to 2.if i do no quality |
|
Platinum Member Username: KirankumarNO Bashing Post Number: 2363 Registered: Oct-07 | terry, you have to turn receiver off from back and go out to your switch and change the cables going to the switch ports and then come in and assign them on your antenna settings |
|
Bronze Member Username: Tgyoung1Illinois U.s.a. Post Number: 38 Registered: Jul-06 | I changed the cable at the switch or back of the dish 500.I have 1 cable 119 to one box and one cable 110 to another box.I understand one cable picks up both sides.? I have same settings as above..thanks...nay ideas |
|
Bronze Member Username: Tgyoung1Illinois U.s.a. Post Number: 39 Registered: Jul-06 | do I need a switch for dish 500? still no speed channels or news channels...I had echo8.10 with#2 good quality and level but no quality on 7ku with number #1 number |
|
Bronze Member Username: Tgyoung1Illinois U.s.a. Post Number: 40 Registered: Jul-06 | should i hook up 1 cable only from dish to splitter one into 2 with outs going to my 2 boxes..? or stick with 2 cables coming out from dish each going to a box.? help appreciated |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics