61.5 channels are gone in my VS Platinum

 

Bronze Member
Username: Pegg

Post Number: 53
Registered: Aug-06
I am not getting any 61.5 anymore. The "S" is 65-70 (which is always as it is), but "Q" is gone down to 0. Not sure why. Anyone knows what could be the problem?
 

Gold Member
Username: Kirankumar

Kenya

Post Number: 1602
Registered: Oct-07
need more info,
what is your set up
how many sats
what are your settings
post and we can help
 

Gold Member
Username: Saqeeb9000

Post Number: 2310
Registered: Oct-07
did u change any setting etc...
did ur dish moved b.c of wind or something..
 

Gold Member
Username: Kirankumar

Kenya

Post Number: 1603
Registered: Oct-07
sada i see you r going to be admin a desi?
 

Bronze Member
Username: Pegg

Post Number: 54
Registered: Aug-06
I've two dishes. The other one is working fine (119), but 61.5 has gone down. I never had such a problem before. I did not change any settings. And when I went to the installation menu, I found port #, frequency, etc. were all same as they were before. Do you think it is wind that displaced the dish? But why there is no change in "S" (Not sure if it stands for signals??).
 

Gold Member
Username: Saqeeb9000

Post Number: 2314
Registered: Oct-07
african come on join us..
 

Gold Member
Username: Kirankumar

Kenya

Post Number: 1606
Registered: Oct-07
sada,
no yaar i am getting bashed a lot,i am going to leave this site soon also

Pegg,
post your satellite settings for all 3 sats so i can help you
 

Gold Member
Username: Saqeeb9000

Post Number: 2315
Registered: Oct-07
pegg i think your dish might have moved due to wind or something..
ur other dish is working fine... and u didn't change any setting so.. i think problem is with your dish..
i am not sure if there is option on ur menu inst, and under option there is something to turn on beep ... then go outside and physically move your dish and u will hear a beep (good beep ) for good signal and bad beep for bad signal. u just need to move it a bit...
i think there is problem with ur siganals..
check menu ins and check how are sings under 119 dish..
remember that there are signals and there is qualtiy..
all what matter is quality...
 

Gold Member
Username: Kirankumar

Kenya

Post Number: 1609
Registered: Oct-07
if you don't post your settings then we can't help
bye
 

Bronze Member
Username: Alijoker3

Post Number: 43
Registered: Feb-08
o , if it happend 2 days ago, they changed TPs so just rescan everyhting will be fine.
 

Bronze Member
Username: Pegg

Post Number: 55
Registered: Aug-06
Here are my settings:
Echo 3 61.5
LNB Power On
LNB Type Universal
LNB High 1250
LNB Low 9750
TP Freq 12297
Diseq Port 2
Motor Off
Legacy SW None

Echo Star 7
LNB Power On
LNB Type Universal
LNB High 1250
LNB Low 9750
TP Freq 12237
Diseq Port 3
Motor Off
Legacy SW None

Echo 3 is not working; Echo 7 is working fine
 

Bronze Member
Username: Wizzard2004

Post Number: 19
Registered: Jan-08
hey oegg,
how do u find all tht info on the settings, i mean i get echo 7 and i have a universal lnb, i know where to find the TP # but wht bout other info like the LNB low and high, and diseq, wht is all tht?
 

Bronze Member
Username: Pegg

Post Number: 56
Registered: Aug-06
Its just in "Menu> Installation> "
 

Gold Member
Username: Saqeeb9000

Post Number: 2323
Registered: Oct-07
LNB Type Universal
change it to standard.. and then check to see if u get the quality signal..
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us