Silver Member Username: Silver1123
Mexico,
DF
Mexico
Post Number: 440
Registered: Jul-07
|
Posted on Is there a new ECM or key change?
Just lost all channels en Charlie en my CS5000 |
Silver Member Username: Kirankumar
Kenya
Post Number: 842
Registered: Oct-07
|
Posted on juan,
you should load bin 160 ,if you still have problems then post here and we will help. good luck |
Silver Member Username: Silver1123
Mexico,
DF
Mexico
Post Number: 441
Registered: Jul-07
|
Posted on I have 160 and it was working great on DN.
A while ago, all got scrambled.
I disconnected my CS and connected my nFusion,which is working great. |
Silver Member Username: Kirankumar
Kenya
Post Number: 845
Registered: Oct-07
|
Posted on did you wait for a while to see if it came back up,try a hard reboot also , it should work |
Bronze Member Username: Taikimoto
Post Number: 29
Registered: Jul-06
|
Posted on also have the 5000 it shows scrambled signal
when the channel freezes will kick back in
in less then a minute |
Silver Member Username: Kirankumar
Kenya
Post Number: 847
Registered: Oct-07
|
Posted on That's correct , but I guess we all are panicking too much because of all the ecms
when scrambled channel comes up just wait , don't change channels |