Pansat 3500 signal problems

Ricki Bronze Member Username: Mamporeros0379 Post Number: 21 Registered: Nov-07	Posted on Friday, January 04, 2008 - 00:37 GMT I downloaded the latest bin on my 3500 but when i conect it to the TV i get no signal i connect my converted 2700 to the same TV and all works fine. I changed capasitor C13 & C14 & still no signal. help please Thank you
RTAP Gold Member Username: Rtap FL Post Number: 1554 Registered: Jan-07	Posted on Friday, January 04, 2008 - 01:11 GMT ricki check your settings in antenna setup.if not tell me ur setup and will help u.need more info.
Ricki Bronze Member Username: Mamporeros0379 Post Number: 22 Registered: Nov-07	Posted on Friday, January 04, 2008 - 01:20 GMT LNB Standard, LNB Local-freq 11250, Diseqc #3, Legacey SW None, Skew 0, TP (1)12225v20.001, Position set Disable, Sat scan all
THE FTA TESTER Gold Member Username: Ke5aqn IF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 3016 Registered: Sep-06	Posted on Friday, January 04, 2008 - 01:21 GMT you have a setting wrong someware....
THE FTA TESTER Gold Member Username: Ke5aqn IF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 3017 Registered: Sep-06	Posted on Friday, January 04, 2008 - 01:22 GMT ricky, what is your set up? what is connected to your receiver? switch? lnb?
Ricki Bronze Member Username: Mamporeros0379 Post Number: 23 Registered: Nov-07	Posted on Friday, January 04, 2008 - 01:26 GMT have pansat switch and two dual lnb
THE FTA TESTER Gold Member Username: Ke5aqn IF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 3019 Registered: Sep-06	Posted on Friday, January 04, 2008 - 01:36 GMT are the lnb's dish pro? do they say dish pro or DP so you have 2 dish antenna's is the right? is this "pansat" switch a disqc switch?
Ricki Bronze Member Username: Mamporeros0379 Post Number: 24 Registered: Nov-07	Posted on Friday, January 04, 2008 - 01:42 GMT The lnb are CAI Amp and yes the switch says disqc, Yes two antenas
Johnner Gold Member Username: Johnner Miami, Florida Post Number: 1413 Registered: Nov-05	Posted on Friday, January 04, 2008 - 01:52 GMT I had the same problem with an 2700 but when i changed the capacitors everything worked again. Check ones more if you are outputting 13 and 18 v
RTAP Gold Member Username: Rtap FL Post Number: 1557 Registered: Jan-07	Posted on Friday, January 04, 2008 - 03:12 GMT ricki if you are using a disque switch 119 on port #1 and 110 on port #2.the disque switch is used if u are using single lnbs.if you have dual lnb which canot be separated then a switch is incorporated inside and u can not use a disque switch.just run your cable directly from your dual lnb to your receiver.
THE FTA TESTER Gold Member Username: Ke5aqn IF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 3048 Registered: Sep-06	Posted on Friday, January 04, 2008 - 03:36 GMT RTAP I just reread this thread he has changed parts inside the receiver for some unknown by this thread reason

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us