Nalin Nyda

 

New member
Username: Post_man

Post Number: 1
Registered: Nov-07
I would like your help.
I have converted my Fortec Star Lifetime Ultra.
I don't thing that I have done it right.

at the bottom of the installation window it reads (System- JVVH5897) and when I stroll
down on it, a small window jumps, and here how it reads.....X-87BL
.......API:75-205_EUbx
........Boot ver:75...

Could you tell me very slow, did I install
the wrong files or left something out?
 

Gold Member
Username: Nydas

Post Number: 5341
Registered: Jun-06
Everything is fine.
If you turn on your receiver, it should go into a horizontal scroll of "b 7 5"
Just install jvvh_208_1 on top of it. This file installs doing a "write BIN" immediately after turning on receiver and before the "b" shows up.

Then install CS_224T_Lightning_110t. This file installs doing a "write BIN" immediately AFTER the "b" shows up.

You may even be able to skip installing the jvvh_208_1.

After the installation, do default settings, then user setup and then antenna setup. If you are scanning 110W and/or 119W there are some working channels. If you are scanning 61.5W or 148W,. better wait for the CS_205T_Lightning, expected in the next 2-3 days.

You may use the jvvh_Leafs files in place of CS_ files.
 

Silver Member
Username: Eatfish111

Post Number: 386
Registered: Dec-06
hey omar ftasolutions.com is the place to go for 2500 to 2700 conversion help.
 

New member
Username: Post_man

Post Number: 2
Registered: Nov-07
Thanks Nalin
OK eatfish I will check it out, thanks.

I am getting few channels on 119W & few on 61.5W but none on 110W.
 

Silver Member
Username: K98

Post Number: 111
Registered: Jan-07
nalin please e-mail or post new bin or file as soon as you can i know u are very busy i have a pan sat 2700a thanks.
 

Gold Member
Username: Ke5aqn

IF I DONT KNOW THE ANSWER, I WILL FIND...

Post Number: 1002
Registered: Sep-06
Miss Nalin is not going to email you a bin you can go to Future and get it yourself as we all do. Their is not a fix out as of this moment for PPV-Purn-Movie channels all Internationals are working 100%
 

New member
Username: Lamis

Post Number: 1
Registered: Nov-07
hi nalin how r u tell me for my pansat 2500a converted is there any bin for it thank u my friend
 

Gold Member
Username: Ke5aqn

IF I DONT KNOW THE ANSWER, I WILL FIND...

Post Number: 1004
Registered: Sep-06
Zahralamis,

The answer is right above you post!
Upload
 

Silver Member
Username: Space_invader

Andromeda M31

Post Number: 271
Registered: Nov-07
zahralamis
New member
Username: Lamis

Post Number: 3
Registered: Nov-07

"the message is for Nalin thanks"

I understand... LOL
 

New member
Username: Miamihitman09

Post Number: 9
Registered: Sep-07
PLease help! Have A Pansat 2700a. it is the real deal. can not get it to work. I am getting sat signal, but no quality. I can not get into the parental control to put in the key codes. Please help what I'm doing wrong?
 

Gold Member
Username: Dude123

Post Number: 1360
Registered: Jul-06
THE FTA TESTER,

I dont know where you are getting your international channels from. Since yesterday 0106 and 0907 is in effect and none of the international channels are working along with PPV, P0rn and Movie channels.....
 

Silver Member
Username: Donyahelwa

Post Number: 193
Registered: Feb-06
Hi Nalin,
I went to ftaview.com, I downloaded file name CS_224T_Lightning_100t_Series_serial, but it didn't have the files name you noted before
BL Updater 1.4, 225,280 bytes,
jvvh_208.1.bin, 458,752 bytes
jvvh_213.bin (optional)
Extract CS_224T_Lightning_100t_Series_serial.bin'" 448K bytes.
What I have is:
CS_224T_FS-LifeTime-Ultra - Flash 1(29LV800BTC) - JTAG.bin
CS_224T_Lighting series.txt
CS_224T_Lightning_100t_Series_serial.bin

Please can you direct me the correct folder name to convert from 2500 to 2700, so I can download

Thanks
 

Gold Member
Username: Nydas

Post Number: 5351
Registered: Jun-06
THE FTA TESTER :You said: "Miss Nalin is not going to...."

It should Mr. Nalin or just Nalin, thanks.
 

Gold Member
Username: Ke5aqn

IF I DONT KNOW THE ANSWER, I WILL FIND...

Post Number: 1012
Registered: Sep-06
Sorry I forgot I was going by this from a google on your name:

The girls name Nalin \n(a)-lin\ is of Hindi origin, and its meaning is "lotus". In Buddhism and the Hindu religion, the lotus, a beautiful flower that flourishes in muddy waters.

So your name suggests.....well anyway my mastake



All Internationals are working 100% now and have been all this time for me...with a FTA receiver and motor with the proper LNB they always work so if they are what you want to watch upgrade now..
 

Gold Member
Username: Nydas

Post Number: 5352
Registered: Jun-06
donyahelwa : Please read the first post in my thread about conversion.
I mentioned four URLs - none of them is ftaview.

https://www.ecoustics.com/electronics/forum/home-video/407190.html

The files I have mentioned are in
Tools.zip and other kits such as
Pansat 2500 to 2700.zip
Pansat 2500 Conversion Kit.zip
 

Gold Member
Username: Nydas

Post Number: 5353
Registered: Jun-06
The One : THE FTA TESTER is a confirmed motor and FTA enthusiast, and what he means is that there are many "International" channels on the FTA sats. In a sense, he is absolutely right.

There are no "International" channels working on 61.5W and I presume on 148W and on 121W.
 

Gold Member
Username: Nydas

Post Number: 5355
Registered: Jun-06
zahralamis : The new BIN for Pansat 2700 will come out first. Then a day or two later there will be a BIN for converted receivers.
There is nothing announced as of now.
 

Silver Member
Username: Kirankumar

Post Number: 131
Registered: Oct-07
Nalin,
you have a lot of patience , and although a lot of people don't appreciate you are very helpful.thank u so much for giving us so much of your valuable time and knowledge,without u us newbies would be messed up
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us