thats called night rider lights. If your FLU is still 2500a not converted to a pansat 2700. All you need to do is reset it back to factory setting and relaod the "BOOT" file first. Make sure it is set to "boot in your flu loader. Then load the new bin. You should get a better bin ask Nalin or LK what is the best file out now. You must make sure it is one that ends with a "T" chancyland bins are good. Good luck. Also use the BL loader for the new bin.
If you don't mind please guide me, I got a Fortec receiver from my friend who didn't use this from May 07. Now If I want to use it what I have to do. Do I need to install both boot and bin files and where I can get all these with helping steps??
Tamee, you have a lot of reading to do. Everybody will be willing to help but I don't think anybody would be willing to sit down and teach you all you need to know. Just read some of the threads here and you'll quickly catchup on the basics.
For someone to be able to point you in the right direction, they'll need to know (a) Exactly what kind of Fortec you have (there's more than one kind), (2) What your System Information shows and (3) Something about your installation - What kind of dishes you have and what they are aimed at.
I have Fortec Lifetime Classic..is it possible to convert Fortec Classic to Pansat or any other model? Would you recommend it? If yes, please guide where I could find appropriate instructions, bin, loaders etc. thanks