I have a dish 500 antenna with an LNB PRO PLUS (2 outputs & 1 input). FTA is a 3500s. Run one line from LNB (#2 output) going to receiver. Do blind scan and get only 110 channels not 119 channels.
119 setup: dsh pro 11250 Scan all 22 khz off
110 setup: dsh pro 11250 Scan all 22 khz off. The diseks use is 2 on both sat.................I get good 99% signal but still Im no picking any channel on 119. I realize to change diseqs and chose 1 & 2 for the satellites..........but now I get signal 99 % only on one of them......................... Could be the position of the satellite????
I, have tried to load a channel master and still not get channels on 119 I have changed the setting for Standard and change diseks and still.......................
The only thing remaining is the SATELITE POSITION................
If you have any other suggestion.............. I wonder if LNB PRO PLUS will be compatible with PANSAT RECEIVERS.?? Do I need a switcher before my FTA???