Archive through October 26, 2007

 

New member
Username: Neesha

Post Number: 5
Registered: Oct-07
NALIN NYDA
CAN YOU ANSWER MY QUESTION ABOVE

THANK YOU
 

Bronze Member
Username: Maro

Post Number: 21
Registered: May-06
come on someone help me i have a 2500a pansat clone and i tryed to convert it to 2700a/e and it dont work and it shows lines going left and right plz someone answer me

thx
 

Gold Member
Username: Nydas

Post Number: 4269
Registered: Jun-06
CoolSatFV : You don't change provider ID. If you have C00LSAT 5000 OR 6000 load the latest BIN and comes with it.
Obtain the BIN from
[link removed] or
http://www.totalfta.com or
http://www.future-fta.info
 

Bronze Member
Username: Maro

Post Number: 22
Registered: May-06
i have a pnasat 2500a clone not a cool sat
 

Bronze Member
Username: Maro

Post Number: 26
Registered: May-06
hey guys i m an humain can some one help me
 

Gold Member
Username: Nydas

Post Number: 4270
Registered: Jun-06
neesha s: USB ports are notorious for giving problems when used as serial ports.
1. Use the drivers that came with the usb to serial adaptor.
2. there are only two types of serial cables - straight and null modem. Buy a M/F RS232 to Null modem adaptor and then with it in or out of the series you will get both types of cables. One of them should work.
3. Most uploaders use only Com1 or com2. Try and get that setting right.
 

New member
Username: Neesha

Post Number: 6
Registered: Oct-07
CAN YOU U USE A BRIDGE WITH A USB WIRE
AND MY COMPUTER IS NOT READING THE PORT
ON MY OTHER COMPUTER I CAN'T DOWN LOAD THE BIN

HELP PLEASE
THANK YOU IN ADVANCE
 

Silver Member
Username: Jalaj69

Norcross , Georgia USA

Post Number: 102
Registered: Sep-06
man I have the same problem with the line going left to right!

I have pansat 2700a clone!



HELP
 

Gold Member
Username: Nydas

Post Number: 4271
Registered: Jun-06
marawan : You will have to follow instructions PRECISELY and reinstall. There are no short cuts and no haste. Your receiver is NOT dead.
Look at conversion thread here and try and find out what you didn't do right.
 

Gold Member
Username: Nydas

Post Number: 4272
Registered: Jun-06
Jalar you should stick to either the vortex or the tivo files -whichever you have been using befre and use the apporpriate loader.
 

Silver Member
Username: Anai

TX United States

Post Number: 172
Registered: Jun-05
ok, I uploaded the Vo167P to my sonicview, and I didnt get all the channels, nothing after 453. suggestions?
 

Bronze Member
Username: Maro

Post Number: 27
Registered: May-06
i did and follow the instruction precisley and they say that after we put the first bin it have to show b75 and it didn t and then its start the line left and right
 

Gold Member
Username: Nydas

Post Number: 4273
Registered: Jun-06
Sccrskills : You have the right attitude. Without the jvvh 218 BIN, there is nothing to gain right now by converting. Others in the conversion quandry read his posts above.
 

Gold Member
Username: Nydas

Post Number: 4274
Registered: Jun-06
ana : do a Blind scan again
 

Bronze Member
Username: Maro

Post Number: 28
Registered: May-06
hey nalin can u just tell me wich bin would be right to convert a pansat 2500a CLONE to a 2700a/e
thanx
 

Silver Member
Username: Anai

TX United States

Post Number: 174
Registered: Jun-05
ill try that, thx
 

Bronze Member
Username: Shyi

Post Number: 12
Registered: Jun-06
heloooooo
please anyone or pros can tell me how to enter key in viewsat plat. after downloading new bin without code option in menu
thanks in advance
 

Gold Member
Username: Nydas

Post Number: 4275
Registered: Jun-06
Barnaby Granado: You have a good receiver and there is a new BIN for it. Go to one of the sites and read about it.
[link removed]
http://www.totalfta.com
http://www.dsstester*com
 

Bronze Member
Username: Jigga19

Post Number: 34
Registered: Feb-07
i currently have flu and i know i have to convert it to 2700 to watch tv. isnt there any other option for me to watch tv with flu and if i have to convert it is there anyother option than using jvh bins and tool kits. is there any other bin and kits or anythin else that can be done with flu to watch the tv.
 

Gold Member
Username: Asharfi

Post Number: 1061
Registered: Aug-06
Marawan,

Please checkout my thread, it's called: FLU-Pansat 2700 Converting Procedure!
 

Bronze Member
Username: Shyi

Post Number: 13
Registered: Jun-06
Nalin Nyda or LK
please give me any advise please for view sat plat how to entre keys .
thanks
 

Bronze Member
Username: Maro

Post Number: 29
Registered: May-06
ok thx AV i will sheck it but is it for clones to
 

New member
Username: Neesha

Post Number: 7
Registered: Oct-07
TRY 0000 FOR THE KEY
 

Bronze Member
Username: Jigga19

Post Number: 35
Registered: Feb-07
i currently have flu and i know i have to convert it to 2700 to watch tv. isnt there any other option for me to watch tv with flu and if i have to convert it is there anyother option than using jvh bins and tool kits. is there any other bin and kits or anythin else that can be done with flu to watch the tv. what tool kit i can use so that i can use either the vortex or the tivo files -
 

Gold Member
Username: Donnie1973

Post Number: 1395
Registered: May-06
muhammed its an AUTOROLL BIN, no need to enter keys.
 

Gold Member
Username: Nydas

Post Number: 4276
Registered: Jun-06
marawan :
Installing the jvvh_208_1.bin (448Kb) and any new serial load 2500to2700 conversion file:
Use a 2500 style loader, specify the model "Pansat 2700A" if necessary.
Download the modded and compressed jvvh_208_1.bin.
Starting download just as you start box and see the first "b" of the "b-75" on the LED display.
When completed let the box re-boot.

Then load the jvvh 211 first.
jvvh_211_pwTd.ZIP

Then load jvvh 217. Wait for jvvh218 and load it when it comes out.
 

Bronze Member
Username: Shyi

Post Number: 14
Registered: Jun-06
HELLO
ANYONE OUT THERE TO HELP
THENKS
 

Bronze Member
Username: Jigga19

Post Number: 36
Registered: Feb-07
nalin. is it possible you can answer my question since you seem to know alot about this..
 

Bronze Member
Username: Shyi

Post Number: 15
Registered: Jun-06
HI, DANTETN}
ITS NOT AUTO ROLLING AND IT HAS NO OPTION FOR CODE /NAGRA AS WE USE TO HAVE IN OLD BIN CURRENTLY I HAVE NOTHING JUST BLANK SCREEN ..
THANKS FOR REPLY
clipart{rofl}
 

Bronze Member
Username: Kamranca

Post Number: 58
Registered: Oct-06
Hi Nalin welcome back,

After convert fortec altra to Pansat 2700 Clone receiver im getting following problems..

1.Im not getting any picture just a massage SCRUMBLE BAD CHANNEL
2. I did BLIND SCAN,Enter latest Dish keys..
What should I do now please help.what about auto roll and provider keys im waiting for your reply.

Thanks a lot
 

Gold Member
Username: Asharfi

Post Number: 1063
Registered: Aug-06
Marawan,

That thread is for CLONES and FLUs ONLY ... I've another thread for the original Pansat 2500
 

New member
Username: Neesha

Post Number: 8
Registered: Oct-07
I'm still having the same problems. The driver that came with the CD is installed. My computer recognizes the cable.

The issue is when I go to upload the bin file to the Loader it sends info to my reciever but there is no progress.

It does not upload constantly remaining @ zero % (progress) Please help!!!! :-(
 

Gold Member
Username: Asharfi

Post Number: 1065
Registered: Aug-06
Kamran,

There was an ECM 2 days ago, and that's why all the converted FLUs are down. We're all waiting for JVVH to release bin 218 for the conveted FLUs and Pansat 2500 CLONES
 

Gold Member
Username: Donnie1973

Post Number: 1399
Registered: May-06
uh... which bin did u load mohammed?
 

Bronze Member
Username: Kamranca

Post Number: 59
Registered: Oct-06
AV does it mean i have to wait..
 

Bronze Member
Username: Halo

Toronto, Ontario Canada

Post Number: 24
Registered: Oct-07
For the converting of Pansat 2500 to 2700 latest dish 0101 and 0106 keys. Bev keys visit www.dish-keys.blogspot.com
 

Bronze Member
Username: Shyi

Post Number: 16
Registered: Jun-06
DANTETN
I HAVE LOAD DBPSW-071024P FROM TOTALFTA....
 

Gold Member
Username: Donnie1973

Post Number: 1402
Registered: May-06
I would get a factory bin file from ftabins or ftaprosupport
factory default- load factory bin- load new bin again.
see if it works after u put on factory bin. If it does, load new bin
 

Bronze Member
Username: Shyi

Post Number: 17
Registered: Jun-06
OK DENTENT
I WILL TRY THAT.. LETS HOPE FOR BETTER.......
THANKS FOR YOUR QUICK REPLY
 

Gold Member
Username: Donnie1973

Post Number: 1403
Registered: May-06
yes sir. good luck
 

New member
Username: Bashir77ca

Post Number: 6
Registered: Jun-07
there is new bin 218 by tivo is it for converted 2500 to 2700?
thans
 

New member
Username: Huremkic

Post Number: 6
Registered: Oct-07
hi guys I have fortec star lifetime ultra and I loaded new bin and my reciver went dead, no # nothing . is my box dead, can I fix it and how it is not converted it is regular fortec star lifetime ultra
 

Gold Member
Username: Asharfi

Post Number: 1067
Registered: Aug-06
Kamran,

Yes we have to wait! :-(

Dawood,

That TiVo bin is not for the converted boxes. It's for the clones and genuine boxes only.
 

New member
Username: Huremkic

Post Number: 7
Registered: Oct-07
AV help please
 

Bronze Member
Username: Shyi

Post Number: 18
Registered: Jun-06
HI DANTETN
I TRIED AGAIN ON COPUTER SCREEN ITS SAY DOWNLOADING COPLETED BUT ON RECEIVER AFTER 1OO % ITS SAY FAILD NOW ITS THE SAME AGAIN
 

New member
Username: Huremkic

Post Number: 8
Registered: Oct-07
I have fortec star lifetime ultra and I loaded new bin and my reciver went dead, no # nothing . is my box dead, can I fix it and how it is not converted it is regular fortec star lifetime ultra
 

Gold Member
Username: Donnie1973

Post Number: 1405
Registered: May-06
Download the bin again from totalfta
make sure u unzip (extract) the folder.
Did u put a factory bin on it??
 

New member
Username: Huremkic

Post Number: 9
Registered: Oct-07
anybody please
 

Gold Member
Username: Donnie1973

Post Number: 1407
Registered: May-06
hure, which bin did u download?
 

New member
Username: Huremkic

Post Number: 10
Registered: Oct-07
218
 

Gold Member
Username: Donnie1973

Post Number: 1408
Registered: May-06
the clone bin or not??
 

Bronze Member
Username: Jigga19

Post Number: 37
Registered: Feb-07
totalfta is shut down its not lettin anyone to the forums. why everyone keeps saying go there...
 

Bronze Member
Username: Huremkic

Post Number: 11
Registered: Oct-07
not a clone
 

Gold Member
Username: Donnie1973

Post Number: 1409
Registered: May-06
try ftabins
ftaprosuppoprt
dssrookie
dsstester
dsscentral
some are .net not .com
 

Bronze Member
Username: Terminator2

Toronto, Ontario Canada

Post Number: 18
Registered: Sep-06
Nalin,

I have an FLU that I am ready to junk. Which receiver out there you feel will be supported in the next few years. Viewsat ... CW or ..etc
Thanks
 

Gold Member
Username: Donnie1973

Post Number: 1411
Registered: May-06
PTA may not last that long, but i'd say sv4000 or vs ultra. Great recievers, low cost, good memory and speed
 

New member
Username: Zia

Post Number: 8
Registered: Oct-07
hi every one
i need your help plz zzzzzzzzzz
i have a pansat2500 i can see my programs but no ppv or any sport is coming on or any desi chanels my box was working fine but i can see only regular programs now no more ppv movies plz help me wat to do to watch my ppv?}}
 

New member
Username: 6will03

Hollywood, Florida USA

Post Number: 1
Registered: Oct-07
guys how's everybody doing, i am the newest guy using sta, and i do't know how to install the new bin in my sonicview sv-100 can anybody show me how and where to get it!!!! pleaseeee.....! i lost almost all channels
 

Bronze Member
Username: Shyi

Post Number: 19
Registered: Jun-06
Hi
Dantetn
Thanks buddy with your help I'm up and running
thanks a lot
 

Gold Member
Username: Donnie1973

Post Number: 1414
Registered: May-06
i cant help on those, i think u need to convert to a 2700. MANY have asked how to do this lately. There are MANY posts that tell u how to do this. There is not a fix yet for the converted boxes, so, u may want to wait. but u can read up on how to do it in the mean time
 

Gold Member
Username: Donnie1973

Post Number: 1415
Registered: May-06
u are welcome. Glad it works for ya
 

New member
Username: Jjari

Post Number: 5
Registered: Oct-07
hi all
i have pansat 2500 , any help plz
thx a lot
jjari
 

New member
Username: Jjari

Post Number: 6
Registered: Oct-07
hi all
i have pansat 2500 , any help plz
thx a lot
jjari
}
 

Gold Member
Username: Donnie1973

Post Number: 1422
Registered: May-06
william... read here
u may need to register for free.

http://www.dssrookie.com/forums/b-font-color-00cc00-sv-guides-faqs-font-b/
 

New member
Username: Jjari

Post Number: 7
Registered: Oct-07
hi all
i have pansat 2500 , any help plz
thx a lot
jjar
 

New member
Username: Zia

Post Number: 9
Registered: Oct-07
hi
i have a pansat2500 . i can see all other programs but not the movies or indian programs wat do i have to do to see those programs? scan or blindscan or antina setup? don't no wat to do plz HELP MEEEEEEEEEEEE THANX
 

Gold Member
Username: Donnie1973

Post Number: 1427
Registered: May-06
zia there are no bins for the 2500 anymore. I answered u a little while ago. a couple posts after u asked the first time.
 

New member
Username: Jjari

Post Number: 8
Registered: Oct-07
plz where can i downlod jvvh218
thx
 

Bronze Member
Username: Falcon21

Van, Bc Ca

Post Number: 13
Registered: Aug-07
Dantetn,
After a pretty good research on most of the sites..
I think my Viewsat Xtreme is dead... Maybe one of the chip is burned... I even have try to use other box's power supply it still doesn't work.
Thanks Fal
 

Bronze Member
Username: Qasim

Montreal, QC Canada

Post Number: 20
Registered: May-06
how can i get the indian channel on the pansat 2700 or in the other word international channels
 

Gold Member
Username: Donnie1973

Post Number: 1429
Registered: May-06
u can try to connect to a working VS with a factory bin on it. connect with the null modem cable from one to the other.
turn on the on with the factory file- go to menu-reciever upgrade-main s/w- click ok
turn on other reciever from back.
worth a shot, see what happens.
u can send it to viewsat for repair. there is a good waranty on it if u have ur reciept
 

New member
Username: Ganjaa007

Post Number: 6
Registered: Nov-06
hi guys i have a cools*t i loaded the 1.51 bin my sat 119 is working fine however my 61.5 is not working at all anyone know why??
 

New member
Username: Sharaz

Post Number: 3
Registered: Oct-07
Hi all,

Can somebody tell me that if Sonicsat is clone of Sonicview 4000....thnx a lot
 

Bronze Member
Username: Pitbullk_9

Post Number: 32
Registered: Oct-06
hi guy can anyone tell me how to get the bin for colsat 4000. my ppv channels are not working. is that the reason why?
 

Bronze Member
Username: Falcon21

Van, Bc Ca

Post Number: 14
Registered: Aug-07
any good receiver other than Viewsat out there??
any suggestions?
 

Bronze Member
Username: Halo

Toronto, Ontario Canada

Post Number: 25
Registered: Oct-07
For dish bin files , Bev/Dish (0101,0106) keys and converting 2500 to 2700 files and instructions visit, www.dish-keys.blogspot.com
 

New member
Username: Sunny416

Post Number: 1
Registered: Oct-07
Hey guys
i have Pansat 2700a i m trying to upload the bin file but it keeps on saying "Unknown File Type"
anyone know how to fix it??
thanks
Sunny
 

Bronze Member
Username: Falcon21

Van, Bc Ca

Post Number: 15
Registered: Aug-07
How can I tell if my Xtreme is a clone or not...
on the outside it looks all the same...
some people r saying there is a clone kill in the new bin... I have bought it from a local dealer..
It will be hard for me to tell if it is a clone or not... So I guess everyone bought the Xtreme online won't have the problem?
 

New member
Username: Kiarra12

Post Number: 1
Registered: Oct-07
Can anyone help me? I'm a newbie and my sat has been down for days. I have an echostar 3100 and need the bin file for it? I would greatly appreciate any help.
 

New member
Username: Boling

Post Number: 1
Registered: Oct-07
Can anyone help me? I'm a newbie and my sat has been down for days. I have an Pansat 3500 and need the bin file for it? I would greatly appreciate any help.
 

New member
Username: Mattalca

Post Number: 1
Registered: Oct-07
PPV movies not working, other channels are working for me. Don't know what to do since no new keys are out. Any Help? Thanks
 

Bronze Member
Username: Jigga19

Post Number: 38
Registered: Feb-07
wat the heck is wrong with this jvvh guy...why isnt he releasing like others..
 

New member
Username: Falafel1

Ny, Ny Usa

Post Number: 1
Registered: Oct-07
Where can I find the bin file for Pansat2700A.

Thanks,
Falafel
 

Bronze Member
Username: Sccrskills

Post Number: 77
Registered: Dec-06
go to ftabins.net register its free and go under file section and into pansat 2700. and ur set.
 

Silver Member
Username: Dr_dss

Post Number: 114
Registered: Sep-07
Rohail malik
wat the heck is wrong with this jvvh guy


Nothing wrong with him. What the heck wrong with you! He owes your nothing! Remember that. He does the bin's as a service to the hobby. He doesn't work for anyone or get paid for doing it.

You are lucky he helps. Remember that before you post your next give-me-give-me Whinner-baby message.
 

New member
Username: Achson

Post Number: 3
Registered: Oct-07
Thanks for all ur Help Nalin & Sonny!!!
NAlin: now that i have to buy a new receiver can u give me suggestions what i should be looking for and for how much.
 

Gold Member
Username: Donnie1973

Post Number: 1445
Registered: May-06
falcon, read... this may help

c/p
OK,Now Look at the register NO# on the box.Its on the lid,Open box cover and make sure NO# Match,With the same VS# inside on the mother board.

If a Clone,they will replace box and the NO# on the mother board will no longer match,also the price of the unit should have been around 170-180.00.
w/null cable and a VS41 or DiSEqC switch 4x1 inside.Thats another clue.

If you bought it on flea-bay,watch out.From a Viewsat dealer your OK, but there again check the ID no# inside the unit.Here is what it should look like.

Now one photo show's what everything is inside(NO jumpers).Real Viewsat,Clones have jumpers inside box.Second photo is for VS ID tag.Look at where it is inside your box,and if it has another sticker over top it,that means it would have been sub'd out from china,still no big deal.

Now your asking 100%,yes or no.Your the only person that can answer that question,you have all the information,Where you bought it,From Whom,how much you gave,ID no# match or not.

I wouldnt care much about the size of the box remember viewsat has alot of company's making them now.Clone's are easy to spot.If your not sure,send it back as long as you can get a refund.
Odd
 

Bronze Member
Username: Dannienjulie

Post Number: 37
Registered: Jul-07
I have a Quantum 4700 and I am only getting a variety of channels. I don't get any PPV, A&E,Disc, or TLC. Can anyone help fix this problem.PLZZZZZ}
 

New member
Username: Achson

Post Number: 4
Registered: Oct-07
how about viewsatultra or sonicview4000
 

Gold Member
Username: Asharfi

Post Number: 1074
Registered: Aug-06
huremkic,

Why did you download that bin 218? There aren't any new bins for FLUs, which means you downloaded the wrong bin and KILLED your unit. If you're getting no power, etc, you have to JTAG.
 

Bronze Member
Username: Manthedent

Post Number: 27
Registered: Sep-06
nalin
do these recivers have the new bins or i have to waint for it to be released and do they show the international channles

Sonicview 4000 - USB and serial input
Viewsat Ultra - USB and serial input
Captiveworks 600 Premium - serial input only
 

Silver Member
Username: Jpz

MTL, QC CAnada

Post Number: 256
Registered: Jun-06
still nothing for pansat 2500 clone ?
 

Bronze Member
Username: Manthedent

Post Number: 28
Registered: Sep-06
nalin
do these recivers have the new bins or i have to waint for it to be released and do they show the international channles

Sonicview 4000 - USB and serial input
Viewsat Ultra - USB and serial input
Captiveworks 600 Premium - serial input only
 

Bronze Member
Username: Sccrskills

Post Number: 78
Registered: Dec-06
nope you have to wait for jvh218 bin untill then nothing more than what you have right now.
 

Gold Member
Username: Nydas

Post Number: 4279
Registered: Jun-06
All receivers are sold with factory BINs. These usually will work with real Free to Air Channells.
The BINs and files discussed in many forums are files that make the receiver work better and correct any deffects in the software.
You see the software is right inside the box, and they cannot take out each box to update the receiver. So what you have to do is to add the latest software after you have got the box.
It's really quite simple.
 

Gold Member
Username: Nydas

Post Number: 4280
Registered: Jun-06
C00LSAT 4000 new BIN released.

[link removed]

COOLSAT4000_NORW_151_20071025.zip (1,006.7 KB)

do not use on clones, such as cooltec and megasat pro.
 

Gold Member
Username: Nydas

Post Number: 4281
Registered: Jun-06
Sonia: these are good receivers, with reasonably good support.

Sonicview 4000 - USB and serial input - about $170
Viewsat Ultra - USB and serial input - about $180
Captiveworks 600 Premium - serial input only - about $110
 

Gold Member
Username: Asharfi

Post Number: 1112
Registered: Aug-06
Fiinally, that JVVH released bin 218 for the converted FLUs and Pansat 2500 Clones. It's an use at your own risk file. Here's the link to download:

www.dssrookie.com
 

Gold Member
Username: Asharfi

Post Number: 1113
Registered: Aug-06
Sorry, here's the link to that new file: [link removed]
 

New member
Username: Boling

Post Number: 2
Registered: Oct-07
Where can I find bin files for pansat 3500?
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us