Archive through October 23, 2007
|
New member Username: HuremkicPost Number: 1 Registered: Oct-07 | what loader,bin I need for pansat 2700a |
|
Silver Member Username: Espn3Post Number: 108 Registered: Aug-06 | Nalin Nyda, you stated that GC is not working with most BINs. Tells us ONE FTA and BIN were GC is working. Thanks. |
|
New member Username: Priya777Post Number: 2 Registered: Oct-07 | i have coolreceiver 5000 and also i have dishnetwork connection where i get international channels. there was free upgrade(dish person just changed the some part of dish but the position is same) by dish network people so we did it. so after that when we connected coolreceiver(after 5 days) some channels are missing and when we did re scan some channels are misiing... and some channels are coming but its coming for sometime then its going scramble channel. what to do? Please help me.. when we did re scan especially we are not getting international channels and ppv. I appreciate ur help... |
|
Gold Member Username: NydasPost Number: 4139 Registered: Jun-06 | john johnson: It is humanly impossible to check ALL the receivers and their latest BINs - even if I had the receivers. Even checking and reading through forums to find what is the current state of affairs - that in itself is a very time consuming task. Therefore,the best I can truthfully post is that "GC is not working with most BINs" or "to the best of my knowledge GC is not working" |
|
Silver Member Username: RtapFL Post Number: 686 Registered: Jan-07 | if you have triple lnb from dish network you would not be able to get both 110/119.what lnb do you have |
|
Gold Member Username: NydasPost Number: 4140 Registered: Jun-06 | raksha : You should mention which BIN there is in your C00LSAT 5000, and which Sats you are attempting to scan and how many LNBs you have. If possible, give your letting on the LNB(s). |
|
Bronze Member Username: Ariana_70Sorel-Tracy, Quebec Canada Post Number: 100 Registered: Aug-06 | Can anyone help me? Please my receiver keeps turning off by itself i have already turned it off in front , in back, took it off the power supply, i even reset it but as soon as i plug it to the wall supply it turns off and on , turns off and off and it could continue all day i guess , i have even left it on and the TV off , i have changed the batts on my control remote , and nothing , i have no idea what else i could do , please this has been going on for 3 days , can anyone help me or give me contructive advise on what to do , i have a norsat receiver , with the fortek and pansat program, it has the 294t bin for dishnet, please i really need help i am in blanc territory. |
|
New member Username: Priya777Post Number: 3 Registered: Oct-07 | nalin nyda: 143 bin currently, 148,110,121,119 scanning. 2 lnb's |
|
Bronze Member Username: GastrognomePost Number: 74 Registered: Dec-06 | Monica, try reloading the 294t bin. turn on from back switch then download |
|
Silver Member Username: Ariana_70Sorel-Tracy, Quebec Canada Post Number: 101 Registered: Aug-06 | Gastrognome , i tryed that already ...could it be that the bin i am downloading is bad ? |
|
Bronze Member Username: GastrognomePost Number: 75 Registered: Dec-06 | could be i guess, try a different bin. loading a file this way may not always take on the first try, could also try hit download then turn on by backswitch. |
|
Silver Member Username: Ariana_70Sorel-Tracy, Quebec Canada Post Number: 102 Registered: Aug-06 | i'll try , tell you tomorrow if it worked or not , thx for advise |
|
Bronze Member Username: GastrognomePost Number: 76 Registered: Dec-06 | also does it turn off/on with the input from the sat disconnected? |
|
Silver Member Username: Ariana_70Sorel-Tracy, Quebec Canada Post Number: 104 Registered: Aug-06 | no i haven't tried to take off the cable of the sat , i'll try that. Thx for the input |
|
New member Username: Ather_da_donMississauaga, Ontario Canada Post Number: 3 Registered: Oct-07 | New and Latest Dish keys and cricket links at: |
|
Gold Member Username: NydasPost Number: 4142 Registered: Jun-06 | Monica: DO NOT take off cable from back without switching off receiver. Currently the older BIN 293T for Pansat 2500A clones is working better with key autoroll. Try up loading that BIN. Keep autoroll on with this BIN. If you reload with 294T, keep autoroll off and manually enter the keys. Use BL updater 1.4 -NOTHING ELSE. If reloading of BIN is difficult, try uploading BIN 280Tor 281T, then 293T. Always redo the User settings after a new upload, particually the date/time settings. |
|
Gold Member Username: NydasPost Number: 4143 Registered: Jun-06 | Raksha: The current BIN for C00LSAT 5000 is version 149 [link removed] You should install that and see if it works better for you. In any case, it is good to be a member of the f2atv site, as they are very knowledgEable about C00LSATS. |
|
Gold Member Username: NydasPost Number: 4145 Registered: Jun-06 | Raksha: Also scanning four LNBs, takes away a fair amount of real estate (memory). It would be a good idea to remove some of the channels - the ones that are duplicate and you do not see. Try to keep your total list of available channels to about 500 or less. Not everybody will agree with this but if it does not hurt you why not implement it? |
|
Silver Member Username: KingusamaPost Number: 413 Registered: May-06 | visit |
|
Silver Member Username: Espn3Post Number: 109 Registered: Aug-06 | thanks Nalin for the answer regarding gc. hope jvvh will take care of this. |
|
New member Username: ElvirmPost Number: 10 Registered: Sep-07 | I have problem with my receiver FLU, Level show about 90, but qualiti is 0, that's mean I can't see anything. Is anybody can help, thanks! |
|
Gold Member Username: Crazy_greekPost Number: 1256 Registered: Jul-06 |  Hey Raksha Even tho Nalin is one of us the good guys I will have to disagree.If you was to Scan in only 500 Channels or less you could only Scan in EchoStar 7 on that Bird I have 334 TV and 153 Radio Stations.Today FTA Receivers have a Channel Memory (TV & Radio) 3,000, 5,000 and 10,000. I would like to HIT 10,000  |
|
Gold Member Username: NydasPost Number: 4153 Registered: Jun-06 | Kevin: You have sound knowledge. I do not want to create a technical controversy in this thread. I had already stated "Not everybody will agree with this" One day when we both have time we will discuss this in an independent thread. |
|
Gold Member Username: NydasPost Number: 4154 Registered: Jun-06 | elvir maric : See my post above on Friday, October 19, 2007 - 07:48 pm: It applies equally to FLU if it is not converted to jvvh 2700. |
|
New member Username: Ather_da_donMississauaga, Ontario Canada Post Number: 4 Registered: Oct-07 | Visit |
|
New member Username: NecrozzyPost Number: 2 Registered: Sep-07 | factory file for vs xtreme? |
|
New member Username: NecrozzyPost Number: 3 Registered: Sep-07 | factory file for locked viewsats? |
|
Silver Member Username: Albino_midgetPost Number: 620 Registered: Jul-06 | factory files [link removed] |
|
New member Username: NecrozzyPost Number: 4 Registered: Sep-07 | My Viewsat xtreme is locked!! Suggestions on how to unlock? |
|
Bronze Member Username: ElvirmPost Number: 11 Registered: Sep-07 | Nalin: It is already converted to 2700. |
|
Silver Member Username: Albino_midgetPost Number: 621 Registered: Jul-06 | you could try this --be aware i don't own a vs or do i know exactly what your asking about. [link removed] |
|
New member Username: NecrozzyPost Number: 5 Registered: Sep-07 | all channel are locked |
|
Bronze Member Username: HaloToronto, Ontario Canada Post Number: 11 Registered: Oct-07 | For latest dish keys visit |
|
Gold Member Username: NydasPost Number: 4161 Registered: Jun-06 | One of the best sites for Viewsat files and discussion is [link removed] Membership is required, but is free. |
|
Silver Member Username: KingusamaPost Number: 416 Registered: May-06 | visit |
|
Silver Member Username: KingusamaPost Number: 417 Registered: May-06 | latest files have been posted on the site for viewsat,pansat and captiveworks for those of you who require it... and bev keys will be posted from now on... gc keys will be posted if requested a lot... |
|
Silver Member Username: JpzMTL, QC CAnada Post Number: 254 Registered: Jun-06 | Hi guys !!! |
|
Bronze Member Username: Dr_dssPost Number: 68 Registered: Sep-07 | One of the quickest ways to get get your needed 32 character hexadecimal string in a fast and easy way is to use irc there be a key channel. http://gogloom.com/Gigacrew/Fta-Keys/ |
|
Bronze Member Username: Rockin473Canada Post Number: 19 Registered: Nov-06 | Can anybody help me with my Viewsat Extreme, before my boyfriend comes home? All of a sudden, I lost all channels on all satelites. I tried doing a blind scan, it didn't work, I desperate, Thanks to all the lads out there! Ashley. |
|
Silver Member Username: AsharfiPost Number: 953 Registered: Aug-06 | If you're getting some "Bad or Scrambled Channel" message, then please turn OFF your receiver from the back and turn it back ON after 10 seconds. Or turn OFF your receiver from the back, disconnect the satellite cable, then reconnect the cable after 5 seconds and turn ON your receiver after 5 seconds. And, make sure you have the latest bin and keys. |
|
Bronze Member Username: HaloToronto, Ontario Canada Post Number: 12 Registered: Oct-07 | For latest dish keys and soon to be added BEV keys visit |
|
Bronze Member Username: Nub2ftaN/a, N/a Canada Post Number: 52 Registered: Aug-06 | c-p: About a year and a half ago this same thing happened before all the stb's went down. The DN provider is testing the impact of the ECM on certain channels and will probably add more channels to the list of blackouts. Stand by for a new update to fix this situation. He too tests his recievers to see if his updates work. Just keep in mind this hobby is about testing aftermarket recievers and by law the providers have to try to keep us testing. |
|
Bronze Member Username: Nub2ftaN/a, N/a Canada Post Number: 53 Registered: Aug-06 | FYI: DN is introducing a new ecm. This is why some channels are being scrambled and some not. We will have to wait for a new file for the fix nub |
|
Bronze Member Username: IndopakPost Number: 37 Registered: May-06 | new dn keys? |
|
New member Username: Kimykim1Toronto Post Number: 1 Registered: Oct-07 | new dn keys plz |
|
Bronze Member Username: IndopakPost Number: 38 Registered: May-06 | KEYS PPL!!!!! |
|
New member Username: Dnkeys0001Post Number: 3 Registered: Oct-07 | KEY PLS |
|
Silver Member Username: Silver1123Mexico, DF Mexico Post Number: 288 Registered: Jul-07 | Guys, read above. It's not a key issue. There are changes in DN. You need to read and understand that the way DN scrambles its signal, is different. You need to install the latest bins. Check around in these posts, there are several fixes already for several boxes. |
|
Silver Member Username: KingusamaPost Number: 424 Registered: May-06 | visit |
|
New member Username: Bant07Post Number: 4 Registered: Oct-07 | but some dishes do not have latest bins and i doubt this is bin problemm.. |
|
Bronze Member Username: Diggy101Post Number: 11 Registered: Aug-07 | Any one have new keys? Help!  |
|
New member Username: Bant07Post Number: 5 Registered: Oct-07 | 2B D6 F6 C6 E5 B2 FA C8 79 F2 3A FF 10 4D 05 ED 3E E4 F1 4A D8 DC 4E E0 05 39 71 31 99 D5 3E 41 |
|
New member Username: Kimykim1Toronto Post Number: 2 Registered: Oct-07 | these are old keys banti it's not working  |
|
Bronze Member Username: K98Post Number: 92 Registered: Jan-07 | new keys plz come on nalin |
|
Bronze Member Username: Diggy101Post Number: 12 Registered: Aug-07 | LK where the hek are you....lol! |
|
Silver Member Username: Silver1123Mexico, DF Mexico Post Number: 289 Registered: Jul-07 | Again, Dish PPV & Adult moved to new provider 0106, instead of the main 0101 provider that handled all Dish channels. New files will be needed. Since you insist, here are the new keys, but, they won't do you much good since you need a new software bin to be able to include them: Dish Network Main - 0101 [Last update: Tue. Oct 16, 3:21 PM CDT] 86: 2B D6 F6 C6 E5 B2 FA C8 79 F2 3A FF 10 4D 05 ED New 96: 3E E4 F1 4A D8 DC 4E E0 05 39 71 31 99 D5 3E 41 Dish Network New PID - 0106 [Last update: Tue. Oct 23, 1:14 PM CDT] 86: D6 9E 74 4D 0A CB ED 62 42 C6 A5 C1 AF AC BE 38 New 96: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
|
Silver Member Username: KingusamaPost Number: 426 Registered: May-06 | keys latest up to now posted at |
|
Bronze Member Username: Bant07Post Number: 12 Registered: Oct-07 | THOSE ARE NOT NEW THOSE ARE THE SAME OLD KEYS WHY DONT U UNDERSTAND? |
|
Silver Member Username: KingusamaPost Number: 427 Registered: May-06 | lol but they are the latest technically.... |
|
Bronze Member Username: HaloToronto, Ontario Canada Post Number: 13 Registered: Oct-07 | latest dish keys and BEV keys on www.dish.blogspot.com |
|
Silver Member Username: Silver1123Mexico, DF Mexico Post Number: 290 Registered: Jul-07 | If you haven`t been following what's been going on with BEV from Canada, similar to DN, they have been changing keys and streams. Currently, BEV has four different sets of keys to be able to watch different programming. Now DN has two sets of keys, one for PPV and Adult channels, and other for the rest. It is speculated that DN will have other key sets for NFL and other programming. Check here for keys: [link removed] |
|
Bronze Member Username: Bant07Post Number: 14 Registered: Oct-07 | HUSSAM THERE IS NO KEY PROBLEM ITS A DIFFERENT PROBLEM...IT SAYS SCRAMBLED CHANNEL NOT WAIT FOR PICTURE!!!!IF U HAD A RECEIVER MAYBE U WOULD UNDERSTAND A BIT BETTER!!!!;) |
|
New member Username: JppatelahdPost Number: 10 Registered: Sep-07 | is anybody have new latest bin for captive works. if yes than plz can u give me.. thanks in advance help will be appreciated.. |
|
Silver Member Username: R1010Canada Post Number: 116 Registered: May-06 | these are not working86: 2B D6 F6 C6 E5 B2 FA C8 79 F2 3A FF 10 4D 05 ED New 96: 3E E4 F1 4A D8 DC 4E E0 05 39 71 31 99 D5 3E 41 plz post working keys thanks |
|
Silver Member Username: Silver1123Mexico, DF Mexico Post Number: 292 Registered: Jul-07 | Banti, this are the latest keys: Posted on Tuesday, October 23, 2007 - 06:01 pm: Again, Dish PPV & Adult moved to new provider 0106, instead of the main 0101 provider that handled all Dish channels. New files will be needed. Since you insist, here are the new keys, but, they won't do you much good since you need a new software bin to be able to include them: Dish Network Main - 0101 [Last update: Tue. Oct 16, 3:21 PM CDT] 86: 2B D6 F6 C6 E5 B2 FA C8 79 F2 3A FF 10 4D 05 ED New 96: 3E E4 F1 4A D8 DC 4E E0 05 39 71 31 99 D5 3E 41 Dish Network New PID - 0106 [Last update: Tue. Oct 23, 1:14 PM CDT] 86: D6 9E 74 4D 0A CB ED 62 42 C6 A5 C1 AF AC BE 38 New 96: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Please try to enter them on Provider 0106 on your box, just remember to install a new bin before, since your box only has provider 0101 |
|
Bronze Member Username: Bant07Post Number: 15 Registered: Oct-07 | thank u sooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo much |
|
New member Username: LialaLodi, Ca Ca Post Number: 1 Registered: Oct-07 | } |
|
New member Username: SamswePost Number: 5 Registered: Feb-07 | hello guys new bin file please !!!! |
|
New member Username: LialaLodi, Ca Ca Post Number: 2 Registered: Oct-07 | i need help any one ther i cant get no channels bad scarmebld |
|
Silver Member Username: KingusamaPost Number: 429 Registered: May-06 | guyz visit |
|
Silver Member Username: Silver1123Mexico, DF Mexico Post Number: 294 Registered: Jul-07 | New bins working smoothly: Captive Works View Sat: Pan SAT Fortec: Still waiting for Cool Sat and others |
|
Bronze Member Username: KikimWindsor, Ontario Canada Post Number: 35 Registered: Oct-06 | hello ,wen im downloading the new bin for pansat 2700a,im using the GTrom loader v27... at was ok befor,now the broblem the reciver count faster than the pc,if eny one can help,thanks. |
|
Bronze Member Username: The_devilPost Number: 13 Registered: Aug-07 | anyone getting 611 to 621 |
|
Silver Member Username: DghummanOntario Canada Post Number: 116 Registered: Feb-06 | which is the latest bin for viewsat extreme that has 0106 provider on the box please tell me the file no |
|
Bronze Member Username: Bant07Post Number: 16 Registered: Oct-07 | HEY MAN I TRIED THIS...biut i have pansat 2500A hot do i put it in there? i try to change the provider ID to 0106 but it does not work ....and why did u put 00 00 00 00...for keycode 96? juan Cavazos Silver Member Username: Silver1123 Mexico , DF mexico Post Number: 292 Registered: Jul-07 Posted on Tuesday, October 23, 2007 - 06:11 pm: -------------------------------------------------------------------------------- Banti, this are the latest keys: Posted on Tuesday, October 23, 2007 - 06:01 pm: Again, Dish PPV & Adult moved to new provider 0106, instead of the main 0101 provider that handled all Dish channels. New files will be needed. Since you insist, here are the new keys, but, they won't do you much good since you need a new software bin to be able to include them: Dish Network Main - 0101 [Last update: Tue. Oct 16, 3:21 PM CDT] 86: 2B D6 F6 C6 E5 B2 FA C8 79 F2 3A FF 10 4D 05 ED New 96: 3E E4 F1 4A D8 DC 4E E0 05 39 71 31 99 D5 3E 41 Dish Network New PID - 0106 [Last update: Tue. Oct 23, 1:14 PM CDT] 86: D6 9E 74 4D 0A CB ED 62 42 C6 A5 C1 AF AC BE 38 New 96: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Please try to enter them on Provider 0106 on your box, just remember to install a new bin before, since your box only has provider 0101 |
|
Silver Member Username: Silver1123Mexico, DF Mexico Post Number: 296 Registered: Jul-07 | To all: New rules for DN: Before, there was only one key, entered in CAS: Nagravision; Ident: Dish Network 0001 or 0101, then enter the keys in 10 (86) or 20 (96) Today, DN has introduced a second key, enterd in CAS: Nagravision; Ident: Dish Network 0106, then enter the keys in 10 (86) or 20 (96). In order to be able to enter the new set of keys, you need to install a new bin, since older ones have capacity for only one set of keys. And beware that maybe DN will introduce other keys, such as BEV that has four keys, for different channels |
|
Bronze Member Username: KarbumPost Number: 21 Registered: Aug-07 | can someone tell me what the hell is a bin??? i've tried to find a guide all over the place i can't find squat regarding that!! plz someone... i've got a viewsat extreme receive and how the hell do i transfer the bin to it? plz someone tell me |
|
Bronze Member Username: Diggy101Post Number: 13 Registered: Aug-07 | Juan How do we find new the new bin files for reciever? |
|
Silver Member Username: Silver1123Mexico, DF Mexico Post Number: 297 Registered: Jul-07 | Damindar: Scroll three messages up for viewsat bins... Banti: Scroll up three messages up for pansat bins. You need to install a new bin that modifies your pansat to be able to get two sets of keys |
|
Bronze Member Username: Pike_376Post Number: 20 Registered: Nov-06 | I have a pansat2500. Does anyone have the new bin file so that I may load the new stuff I need please. I would greatly appreciate them please |
|
Bronze Member Username: KarbumPost Number: 22 Registered: Aug-07 | can someone tell me what the hell is a bin??? i've tried to find a guide all over the place i can't find squat regarding that!! plz someone... i've got a viewsat extreme receive and how the hell do i transfer the bin to it? plz someone tell me |
|
Bronze Member Username: Bant07Post Number: 17 Registered: Oct-07 | but pansat 2500 does not have new bins and i dont want to convert it to 2700....how about for viewsat xtreme do u have to put these codes in and change the provider ID from 01 01 to 0106 what is the procedure for this? please help me |
|
New member Username: Ill0_illPost Number: 1 Registered: Oct-07 | Does anybody know where to get the new bin? |
|
Silver Member Username: DghummanOntario Canada Post Number: 117 Registered: Feb-06 | can u please tell me the bin no for viewsat extreme |
|
Silver Member Username: Silver1123Mexico, DF Mexico Post Number: 298 Registered: Jul-07 | Chip: I look for them in these sites, some require registration, but are free. Look for your box brand and model. Also, you will find information on how to download and install. Be sure to get the latest bin (software) according to your model, and also, be sure to get the loader with instructions. In order to install the bin, you need another piece of software called loader, also found where you get the bins. You need a cable, usually a 9 pin null or printer cable, found at any Radio Shack, to connect your computer to the satellite receiver to install the software. http://ftabins net/ (put a . before net) Be patient, there will be a lot of traffic on the sites |
|
Bronze Member Username: Diggy101Post Number: 14 Registered: Aug-07 | Thanks dude! |
|
Silver Member Username: Silver1123Mexico, DF Mexico Post Number: 299 Registered: Jul-07 | To all: Basic knowledge: FTAs need software in order to work. These software codes are called bins. Depending on the model and brand of your box, you will need a very specific bin, or software. For example, if you have a view sat, you need a bin for that box, if you use a bin for PanSat, your box will not work. Steps: 1. Find the correct bin: New bins working smoothly: Captive Works View Sat: Pan SAT Fortec: Still waiting for Cool Sat and others 2. Also, find other piece of software, called loader, to be found in the same place as the bins. 3. Read tha instructions, found also at the sites 4. Launch the loader in your computer. 5. Turn off the satellite box. Connect a 9 pin null or printer cable found at any Radio Shack from your computer to your satellite box. 6. Turn on the satellite box. 7. Follow instructions on the loader, it will verify the software installed in your box, then it will ask you to direct it to the new bin you downloaded, 8. It might seem hard, but its really easy. check ftabins*net for instructions on your specific brand. Rembember some words are restricted, thats why I write them different so I am able to post it |
|
Silver Member Username: Silver1123Mexico, DF Mexico Post Number: 300 Registered: Jul-07 | Banti, I heard that 2500 has no support for new bins. There are a lot of posts around here about how to convert, and good and bad experiences. Check the posts. Good Luck |
|
New member Username: Kimykim1Toronto Post Number: 3 Registered: Oct-07 | what about cool sat 5000 platinium |
|
Silver Member Username: Silver1123Mexico, DF Mexico Post Number: 301 Registered: Jul-07 | Kim, welcome to the club, thats my reciever also. Be patient, for some strange reason, Cool sat bins are the last to roll out, usually one day after the viewsat bins are released. Go here to check for updates: |
|
Bronze Member Username: Jerseynigga007Post Number: 27 Registered: Sep-06 | How do i go to change the Keys!!!! if i have the new bin file installed in my fortec ultra |
|
Bronze Member Username: KarbumPost Number: 23 Registered: Aug-07 | ----------->> what file to download from ftabin for viewsat extreme??? there's a long list of it and the oldest file was 6 days old, which one is it? someone knows?? plz |
|
Gold Member Username: NydasPost Number: 4167 Registered: Jun-06 | Pnasat 2500 clone. Sonicview 4000 Echo 3 is down. Echo 8.1 - PPVs are down, but many others channels working. AV in this forum is reporting than converted Flu to 2700 are also similarly down. |
|
Silver Member Username: KingusamaPost Number: 431 Registered: May-06 | visit |
|
Bronze Member Username: Diggy101Post Number: 15 Registered: Aug-07 | I'm with ahmed which is it! |
|
Silver Member Username: Silver1123Mexico, DF Mexico Post Number: 302 Registered: Jul-07 | Jersey: If you have the new bin, you shouldnt need to enter keys manually. Check here for instructions on how to enter keys and to activate autoroll |
|
Silver Member Username: Silver1123Mexico, DF Mexico Post Number: 303 Registered: Jul-07 | Chip ahmed: Always download the latest bin, the one that was posted most recently. |
|
Bronze Member Username: KarbumPost Number: 25 Registered: Aug-07 | ----------->> what file to download from ftabin for viewsat extreme??? there's a long list of it and the oldest file was 6 days old, which one is it? someone knows?? plz |
|
Platinum Member Username: LklivesPost Number: 13030 Registered: Jan-06 | There are NO new Working Viewsat files released anyplace yet!...some clown posted bogus ones, and some sites NEVER checked them out originally and posted them...ftabins was one of those.....its impossible to stop people from posting bogus files, but I myself wil not post any file until I know its a good one!.... ONLY new working ESPN and other DN channel fix files now are out and posted are at... and they are ONLY for the Captiveworks Pansat Conexsat All other receivers do NOT have fixes yet, but shpould sometime tonite or tomorrow... |
|
Bronze Member Username: KarbumPost Number: 26 Registered: Aug-07 | it doesn't say whether it's a bin or something on any of the files on ftabins.net , how do i know if i'm downloading the right bin, can someone just say the filename so others like me aren't confused about it |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics