|
Silver Member Username: Micklee11801Post Number: 124 Registered: Feb-06 | Hi all, I have a Superdish 121 for 110, 119 and 121 and dish 500 for 82 and 91 sat, total of 5 sats. I would like to hook up 2 fta receivers on all 5 sats. Hardwares 1 superdish lnb 110, 119, & 121 (119 and 121 have only one output). 1 dish 500 82 & 91 (2 single dishpro with 2 output each) 1 dp 34 2 diseqc 2 sw 21 switches. I have a pansat 2700 & viewsat ultra. Will I be able to use any of the above hardware to make my 2 fta recievers work or I need some other hardware or switches? Thanks! |
|
Platinum Member Username: LklivesPost Number: 10915 Registered: Jan-06 | I don't see how with the 119 and 121, if they ONLY have 1 output on each...1 output = 1 receiver... |
|
Gold Member Username: NydasPost Number: 3209 Registered: Jun-06 | I suggest you look at this thread. Therapo was posting quite well before but he is not lately. You might want to try PM him. https://www.ecoustics.com/electronics/forum/home-video/360673.html Also look at the following diagram http://www.microyal.com/dp-34a-instal-istrn.jpg |
|
Silver Member Username: Micklee11801Post Number: 125 Registered: Feb-06 | Thanks LK, I know that is the problem with the superdish. Do you think if I get one more dp 34 and two 22khz switch should get both working? Here is what I mean. one dp 34 connect to 119, 110 & 121 and the other dp 34 to 82 $ 91 sat. Then from both dp 34 where receiver 1 output to 22khz swith. And from the 22khz switch to receiver 1. Samething to the other receiver except both cable on the dp 34 will be on receiver 2 to 22khz switch. Do you think that will work LK? If not, does anyone have suggestion to me. Thanks! |
