Archive through May 31, 2007
|
Bronze Member Username: Lbinny1Post Number: 36 Registered: Jun-06 | i was told the co*lsat has a great hd receiver and costs around $500. you can get bev in hd. the viewsat has an hd receiver but i was told with all the add on's you need to make it work, it will cost around $1000. not sure what channels that gets in hd. |
|
Silver Member Username: JpzMTL, QC CAnada Post Number: 201 Registered: Jun-06 | hi |
|
Bronze Member Username: WalidsmPost Number: 15 Registered: Aug-05 | DN New keys please |
|
Gold Member Username: NydasPost Number: 2603 Registered: Jun-06 | DN keys have not changed since 11th April. 1. Turn off receiver at back and turn on after 30 seconds. 2. If no tv, do autoroll off, set default kesy and enter both Key 00 and key 01 manually. Then do no 1 above. |
|
New member Username: Msingh01Post Number: 1 Registered: May-07 | Looking for a FTA receiver to work with a SuperDish (Dish Network). Any recommendations? |
|
Gold Member Username: NydasPost Number: 2604 Registered: Jun-06 | Manpreet Singh: https://www.ecoustics.com/electronics/forum/home-video/348927.html |
|
Gold Member Username: NydasPost Number: 2605 Registered: Jun-06 | Another Rookie: https://www.ecoustics.com/electronics/forum/home-video/348285.html |
|
New member Username: Maddog83Post Number: 1 Registered: May-07 | Is it possible to hook up a Pansat 2500A to the new Dish 500 Pro? When I try I keep getting the signal strenght bouncing. |
|
Bronze Member Username: Larry1Dawson creek, Bc Canada Post Number: 38 Registered: Jan-07 | is there any new keys for bev thanks |
|
New member Username: 101oldmanPost Number: 2 Registered: Apr-07 | Please someone help ..119 sat..is gone..nothing..tried scan and still nothing..110 still working..can someone please help?? what's the fix?? is there one?? 119 working until noon pacific time..now only 110 ...thank u checked dish setting and very low..so changed the committed # from 3 to 2 and good but the 110 is also on the # 2?? confused..help thanks |
|
New member Username: Pham87Post Number: 8 Registered: Mar-07 | can someone help me with 119? It has a strong signal but it keep saying " channel scramble " please help! thanks |
|
Silver Member Username: BertoroToronto, Ontario Canada Post Number: 541 Registered: Apr-05 | you guys with " channel scramble "...are u sure u have the latest keys installed? |
|
New member Username: Pham87Post Number: 9 Registered: Mar-07 | yea. The keys hasn't changed yet since april 11 |
|
New member Username: Traill05Post Number: 1 Registered: May-07 | hey i am a new memebr long time Fta owner looking for new Dishnet work keys Dish Provider 0101: Last Updated (April 13 6:00pm EST) Key 0: B8 46 82 2D 29 B6 25 87 8C B1 63 15 24 65 0D 8A Key 1: 53 B1 5A D5 D0 FD 53 8C 6F 19 5F DE BF 78 80 8E (active) THESE KEYS O NOT WORK they did but went down on may 5 or 6 please anyone with keys could you post them |
|
New member Username: Traill05Post Number: 2 Registered: May-07 | hey does anyone have the new dish network keys |
|
Silver Member Username: BertoroToronto, Ontario Canada Post Number: 542 Registered: Apr-05 | j those are good working keys..im watching tv rite now...must be something different |
|
Silver Member Username: BertoroToronto, Ontario Canada Post Number: 543 Registered: Apr-05 | i do have the key master/key ripper, they report no changes...and most important ... IAM WATCHING TV RITE NOW...SO DONT TELL ME THEY DONT WORK |
|
New member Username: Ryan2oo6Peguis, Manitoba Canada Post Number: 1 Registered: May-07 | my keys are also down. |
|
New member Username: Rusty32364Post Number: 1 Registered: May-07 | they work fine, so far anyways |
|
Gold Member Username: NydasPost Number: 2608 Registered: Jun-06 | Key problems. DN keys have not changed. Presuming you have a valid BIN, if you are having problems, do the following: 1. Turn autoroll off. 2. Switch off at back and on again after 30 seconds. If no TV, 1. Keep autoroll off, do set default keys. 2. Manually install both key 00 and key 01 3. Switch off at back and on again after 30 seconds. If still no TV, 1. do factory reset. 2. Reinstall BIN 3. Restore User settings, time, date, time zone. 4. Reinstall keys. 5. Do an appropriate rescan. |
|
Bronze Member Username: ShhhPost Number: 19 Registered: Feb-07 | Hi anyone! Is it true that Fort Lifetime Classic NA bin is available now? Is 070411 bin is the latest?  |
|
New member Username: Lost_boyPost Number: 3 Registered: May-07 | Check it out pepople A great FTA dealer site with forum section |
|
Bronze Member Username: CurlerPost Number: 32 Registered: Mar-07 | bev working okay with the exception of the movie network channels and venus channels. Anyone else have this problem? |
|
Bronze Member Username: LeinesPost Number: 24 Registered: Apr-07 | on bev my venus channels are just taking an extra second or so to come on.. it sits at black screen then comes out after maybe 15 seconds.. |
|
New member Username: Abbasusa77Post Number: 4 Registered: Apr-07 | hi there is any onew have new keys for dish network |
|
Gold Member Username: NydasPost Number: 2638 Registered: Jun-06 | DN keys - last update on 11th April BEV Keys last update on 26 April Read my post - 3 above - on troubleshooting. |
|
Gold Member Username: LklivesPost Number: 9438 Registered: Jan-06 | nada nalin...this is where U belong...preschool class! |
|
Gold Member Username: NydasPost Number: 2643 Registered: Jun-06 | C/P "WTF...wow, is this NOT true!...some very WRONG statements here..but typical of LK.. straight out of psychiatric hospital" |
|
New member Username: Imran123456Post Number: 1 Registered: May-07 | Hello, I bought a new Viewsat Ultra, but I don't know how to use it. What loader do I have to use? And if you have it can you e-mail to me at: imran11222@hotmail.com? Can you also explain to me how to setup and download the reciever, because I never used it before? Please explain everything to me step by step. Thank You, Imran |
|
Gold Member Username: NydasPost Number: 2654 Registered: Jun-06 | Imran Khan: Viewsat Ultra has a USB drive slot. So buy a USB drive for $10-30, and use that only. Preload it via Internet with all the files, channels lists, etc in a methodical manner, then take the USB drive to the Viewsat ultra nd using the remote install whatever you need to install. ALL instructions and informtation and files are available at several sites. You will need to spend time - about 3 hours - reading there and also reading your manual. Most sites have separate sections for Viewsat receiver, and forum for discussion on viewsat. Sites as follows: |
|
New member Username: Imran123456Post Number: 2 Registered: May-07 | Hello Nalin, I have a Data Cable, would that work? Where and how do I go about downloading files, and channels into the reciever? The sites that you sent me, i have no clue what or how to do anything. I tried downloading with the data cable, but I don't know how to. Can you tell me if I save the file first or run it, and where will it I find all these files? Can you please provide me with more information, because I wasted about 4 hours and still got nothing done. I'm blank with this reciver information. Thank you for your help, but can you explain me everything more clearly? Imran |
|
New member Username: Imran123456Post Number: 3 Registered: May-07 | I have Dish Network 500 with 2 LNB, but my Viewsat Ultra only have one place to plug the wire. Where do I plug the other wire, since there are two because its a 2 LND Dish? Thank You Imran |
|
Bronze Member Username: Lookekhoshshans_1356Tehran, Tehran Iran Post Number: 11 Registered: Apr-07 | hi all I have Ariza 700 & I download WinRar download free and AA_1_h20070413_295eEu_N_bgmain.rar. my Ariza work very nice.Thank you Nalin Nyda . Now i have 110 and PPV.you are can download too. Thank you every body bye |
|
Gold Member Username: NydasPost Number: 2667 Registered: Jun-06 | Imran Khan: Forget your "data cable" and go and buy a USB drive (also known as thumb drive) for $10-30. Get a computer literate person to help you get the files and the info, and upload it your receiver. My instructions are detailed enough for anybody with reasonable computer knowledge to help you further. |
|
New member Username: MedoPost Number: 1 Registered: Mar-07 | HI ANY NEW KEY FOR DN |
|
Bronze Member Username: Angie_wedgewoodPost Number: 53 Registered: Jan-07 | DN keys haven't changed since the 11th of April.. |
|
New member Username: MedoPost Number: 2 Registered: Mar-07 | ARE you sure cuz it looks like they did my tv is not working |
|
Gold Member Username: NydasPost Number: 2674 Registered: Jun-06 | Key problems. DN keys have not changed. Presuming you have a valid BIN, if you are having problems, do the following: 1. Turn autoroll off. 2. Switch off at back and on again after 30 seconds. If no TV, 1. Keep autoroll off, do set default keys. 2. Manually install both key 00 and key 01 3. Switch off at back and on again after 30 seconds. If still no TV, 1. do factory reset. 2. Reinstall BIN 3. Restore User settings, time, date, time zone. 4. Reinstall keys. 5. Do an appropriate rescan. |
|
New member Username: Joecap43Post Number: 1 Registered: May-07 | how come my echostar 6.8 works fine but my echostar 7 never gets signal anymore. is there any way to fix this? |
|
Silver Member Username: JpzMTL, QC CAnada Post Number: 202 Registered: Jun-06 | Hi To all, some of the channels are changimg to another numbers, I am talking about BEV. is that wright? |
|
New member Username: Imran123456Post Number: 4 Registered: May-07 | Where can I get the latest BIN file for Viewsat Ultra? Imran Khan |
|
Gold Member Username: NydasPost Number: 2707 Registered: Jun-06 | Imran Khan: I gave you a list of sites and URLs. What is wrong with you? |
|
Silver Member Username: JpzMTL, QC CAnada Post Number: 203 Registered: Jun-06 | DN keys are still the same, and it is working |
|
New member Username: Imran123456Post Number: 5 Registered: May-07 | Nalin Nyda: Don't get upset with me! I don't have any clue about this reciever. I did what you told me, and downloaded the channel list. I also bought the UBS drive. After loading the channels, what eles do I have to load? The loading of the channels didn't make any difference, the reciever is just blank. The site that you gave me: Imran Khan |
|
Gold Member Username: NydasPost Number: 2715 Registered: Jun-06 | Imran: You should read the "sticky" postings at some of the sites and there are clear cut instructions at the sites on how to load a BIN. You should never have to pay for memebership anywhere. Here are a FEW examples of what is avaialble, but there is much more at ALL the sites. **-- **-- **-- **-- **-- **-- **-- **-- **-- **-- **-- **-- How To: Loading Viewsat Ultra via USB Here is a nice guide on loading bins to the VS Ultra using the USB memory stick. Attached Files Loading Viewsat Ultra Via USB Flash Drive.zip (195.8 KB) You will download and unzip this file to read the instructions. **-- **-- **-- **-- **-- **-- **-- **-- **-- **-- **-- **-- This URL will get you the full manual. **-- **-- **-- **-- **-- **-- **-- **-- **-- **-- **-- **-- This is the url to the latest BIN. You will download the following file, unzip it and load it using instructions from the file above PFTAUSW-070502U.zip (1.12 MB, ) |
|
Gold Member Username: NydasPost Number: 2716 Registered: Jun-06 | Imran: If you cannot download files, etc or do not know how to get the information from a site, it is best you have a computer user who can. I repeat: THERE IS TONS OF INFORMATION, INSTRUCTIONS, CHANNELS LIST, BINs AND OTHER FILES AT A LOT OF SITES. You have to get it. |
|
Bronze Member Username: Lbinny1Post Number: 39 Registered: Jun-06 | I finally got my viewsat ultra working, but I am missing channels and when I go to some channels the bottom guide thing flickers and theres no picture. I have echostar 7, 8.10, and nimiq 1.3 And if it helps two of the missing channels that I've discovered so far are mtv and cartoon network. And as far as the settings are concerned - it used to work fine. Is there a reason that the settings would all of a sudden need to be changed? P.S. The problem was the diseqc switch. And my current settings are: Echostar 8.10: LNB Power: On Type: OCS-DP Freq: 11250 22khz: off TO Freq: 11239 (i think? its automatic you cant change it) Search: All Diseqc: Port 1 Motor: Off Legacy SW: None Echostar 7: same, but port 2 Nimiq 1.3: same, but standard and port 3 I know LK suggested switching ports once when I couldn't get it to work, could that be the issue still? Or that has nothing to do with the channels missing? Thank you in advance. |
|
New member Username: Imran123456Post Number: 6 Registered: May-07 | Nalin: Thank You for all the information. I had tried downloading files before your message and it always said "failed". Before downloading your files into the reciever, I factory default it so it would deleate any wronge infomation that had turned out as fail. When I tried to download the new files, the reciever would'nt turn on. The reciever just says 00.00 and there is no screen menu showing on the T.V. What's wrong? |
|
Silver Member Username: Albino_midgetPost Number: 514 Registered: Jul-06 | imran khan ,ask the question at site you got the files from. |
|
Gold Member Username: NydasPost Number: 2717 Registered: Jun-06 | You download files from the remote sites using your computer, internet connection and USB drive. Then you unzip the files. Then you read the instructions given in the how to file. Then you try to upload to your Ultra taking the USB drive to the receiver, plugging it into it and using the remote. You follow the instructions. Again, all these are very elementary questions, so you should have somebody more knowledgable than you with you. Usual cause of failure is not unzipping the file and wrong cable. You are not using a cable now so the only snag is unzipping the files, and following the instructions properly. |
|
Bronze Member Username: AsadhussainPost Number: 65 Registered: Nov-06 | can anyone help me...my satellite isnt workin...is there any new key |
|
Bronze Member Username: Joe123xyzPost Number: 30 Registered: Oct-06 | Dish Network (Last Update: 2007/04/11 4:17 PM PDT) 86: B8 46 82 2D 29 B6 25 87 8C B1 63 15 24 65 0D 8A 96: 53 B1 5A D5 D0 FD 53 8C 6F 19 5F DE BF 78 80 8E Bell ExpressVu (Last Update: 2007/04/26 11:19 AM PDT) 86: 6B 73 F5 77 2A D2 4B 89 58 FC 76 ED 01 08 E1 9F 96: C7 8A B8 CF AD 48 CF 75 CA 1B 8A 43 D4 AA AA CC |
|
New member Username: 9999Post Number: 7 Registered: Apr-07 | Hi, to all One more time I'm back with a question. How to add a new satelite (BEW)to a Pansat 2500A I have a dish and a switch. Where to direct a dish and what to enter in the receiver Thanks |
|
Gold Member Username: LklivesPost Number: 9629 Registered: Jan-06 | So u have a dish, switch and receiver and now u want in the game....start with reading at recommended reputable sites... |
|
Gold Member Username: NydasPost Number: 2724 Registered: Jun-06 | joe vujevich: You should post your current set up - such as Dishes, LNBs, and the setting inside the swith if any. |
|
Silver Member Username: GrimreeperPost Number: 299 Registered: Feb-06 | joe should go and read for awhile then start his own help thread |
|
Bronze Member Username: Anelie2006Saint luuu, Mo Us Post Number: 14 Registered: Mar-07 | any one got keys? |
|
Silver Member Username: BertoroToronto, Ontario Canada Post Number: 549 Registered: Apr-05 | no changes for dn analie |
|
Bronze Member Username: Anelie2006Saint luuu, Mo Us Post Number: 15 Registered: Mar-07 | thanxx im sorry My mistake |
|
New member Username: SandyhCambridge, Ontario Canada Post Number: 1 Registered: Feb-07 | Anyone Have New Numbers For DN} |
|
New member Username: SandyhCambridge, Ontario Canada Post Number: 2 Registered: Feb-07 | Sorry, Just Needed To Re-Boot The Box} |
|
Bronze Member Username: LololPost Number: 75 Registered: Sep-06 | Hi, how come SET< SETMX, and TVASI not working anymore anyone kkonw??? thanx in advance |
|
Silver Member Username: JpzMTL, QC CAnada Post Number: 204 Registered: Jun-06 | hi |
|
Gold Member Username: NydasPost Number: 2726 Registered: Jun-06 | lolol: Those three (SET SETMAX, and TVASA) are all on one TP 12470(H). Try swithc off and on at th eback, otherwise do a TP scan. They are working |
|
Bronze Member Username: RufidadaPost Number: 40 Registered: May-06 | HI Nalin i have viewsat extreme and i tried switching it on and off but still i dont get set max. instead i get a massage of autoroll processing. i dont know how to do TP scan can you help me please Thanks |
|
Gold Member Username: NydasPost Number: 2727 Registered: Jun-06 | Menu/Installation shouldgive you option of Blind scan and TP scan. Also, you should turn autoTP on and channels that have moved will come in. |
|
Bronze Member Username: LabonitafdaMontreal, Quebec Canada Post Number: 20 Registered: Nov-06 | hi pls help me i have fortec star dvb 786 v3 which bin file flashing my recev ?????? |
|
Bronze Member Username: RufidadaPost Number: 41 Registered: May-06 | Hi Nalin Thanks for the help. you mentioned that set and all those missing channels are on TP 12470H i have added this Tp but i am not sure about S/R number which is either 20000 or 21500 with other channels and it also ask for some number that appears in fraction as 1/2 3/4. can you tell me what they are . i did channel scan and this TP has Q 0% while the S was 76%. thanks |
|
Gold Member Username: NydasPost Number: 2731 Registered: Jun-06 | for SET SETMX, TVASA Echo3 AT 61.5w - TP 12470H S/R number 20000 On 148W or 121W they would be different TPs. |
|
Silver Member Username: AnaiTX United States Post Number: 165 Registered: Jun-05 | new keys please, i lost my signal yesterday |
|
Gold Member Username: Dude123Post Number: 1040 Registered: Jul-06 | ON 148W its TP 12370 |
|
Gold Member Username: Dude123Post Number: 1041 Registered: Jul-06 | ana Keys are same, just do a Tp scan if you have lost some channels |
|
Bronze Member Username: Joe123xyzPost Number: 31 Registered: Oct-06 | D!SH Last Update: 05/13/07 07:37 am 00: B846822D29B625878CB1631524650D8A 01: 53B15AD5D0FD538C6F195FDEBF78808E |
|
Gold Member Username: NydasPost Number: 2742 Registered: Jun-06 | DN: Provider ID 0101 (Last Update: 11th April, 2007) Key 00 (86): B8 46 82 2D 29 B6 25 87 8C B1 63 15 24 65 0D 8A Key 01 (96): 53 B1 5A D5 D0 FD 53 8C 6F 19 5F DE BF 78 80 8E BEV Provider ID 0901 (Last Update: 26th April, 2007 ) Key 00 (86): 6B 73 F5 77 2A D2 4B 89 58 FC 76 ED 01 08 E1 9F Key 01 (96): C7 8A B8 CF AD 48 CF 75 CA 1B 8A 43 D4 AA AA CC BEV Provider ID 0905 (Last Update: 15th March, 2007) Key 00 (06): B7 2F 03 35 70 4A CD B0 6D 43 33 59 92 E2 1D F3 Key 00 (46): D5 51 BA FE 58 50 BE 61 A4 BD 09 F3 54 4F C5 FC BEV Provider ID 0906 (Last Update: 17th March 2007) Key 00 (06): 8D 1A 1C F4 2C B9 7F 85 38 65 D6 7A 5D 59 5D 88 Key 00 (46): 11 FE 27 1D 89 9E D3 B4 DB 8E CB C8 10 D3 E7 F7 |
|
New member Username: YahelwePost Number: 4 Registered: Mar-07 | Hi NALIN, I need ur help please. my dish stopped working last saturday. Yesterday i read all ur recommendations about DN TROUBLESHOOTING, like switching the receiver off and on, turn the auto-roll off, entering the keys manually... I did all that and it worked for an hour but with a scrambled picture, but then it went down again. I tried the same process again, and it's not working. any suggestions? thanks in advance |
|
New member Username: JakeinthediscoOrlando, Fl Usa Post Number: 1 Registered: May-07 | Does Dish Network Channels work for any of you??? And how people from "maestra" site knew eveything?? ps:That site dosent work anymore. |
|
Bronze Member Username: ShhhPost Number: 20 Registered: Feb-07 | Hi any One My remote for Life time classic NA is missing. Is there any way I can change and enter codes with out remote until I find it? Thanks  |
|
Gold Member Username: LklivesPost Number: 9693 Registered: Jan-06 | nope, need the remote...hopefully it has a WORKING autoroll bin loaded that will change the keys, if keys were to change until U get the remote..and that receiver usually has only 1 current working bin, which is not very popular or quickly available.. |
|
Gold Member Username: NydasPost Number: 2743 Registered: Jun-06 | Lili boudiwan : For most receivers, the BIN has not changed in the last week and the DN keys are the same for the past 8 weeks or so. If you have tried "Autoroll off","Set Default Keys" followed by manuall entry of BOTH key 00 and key 01, then your only option left is to reload the BIN. If you post your receiver model, and more information about your setup, somebody here might be able to take a fresh look at it. |
|
New member Username: Circ99Post Number: 4 Registered: Mar-07 | Anyone have new Bev Keys |
|
Bronze Member Username: DanohPost Number: 87 Registered: Nov-06 | 6B73F5772AD24B89 58FC76ED0108E19F F169FAE95F6E3394 F169FAE95F6E3394 new bev keys as of may 29 |
|
Gold Member Username: LklivesPost Number: 9696 Registered: Jan-06 | there are none..use the old ones or scroll up and get the links to latest keys.. Direct links to current Dishnet and Bev keys: [link removed] [link removed] |
|
Bronze Member Username: DanohPost Number: 88 Registered: Nov-06 | these r the correct keys 6B73F5772AD24B89 58FC76ED0108E19F F169FAE95F6E3394 5E28F3C4995A00F5 |
|
Bronze Member Username: DanohPost Number: 89 Registered: Nov-06 | Updated: May 29, 2007 Bell Expressvu: Aux86: 6B 73 F5 77 2A D2 4B 89 58 FC 76 ED 01 08 E1 9F Aux96: F1 69 FA E9 5F 6E 33 94 5E 28 F3 C4 99 5A 00 F5 (Active) |
|
Gold Member Username: LklivesPost Number: 9697 Registered: Jan-06 | BEV KEYS Last Update: 05/29/07 09:27 am Key00: 6B 73 F5 77 2A D2 4B 89 58 FC 76 ED 01 08 E1 9F Key01: F1 69 FA E9 5F 6E 33 94 5E 28 F3 C4 99 5A 00 F5 Active Direct links to current Dishnet and Bev keys: [link removed] [link removed] |
|
New member Username: JakeinthediscoOrlando, Fl Usa Post Number: 2 Registered: May-07 | is there new Dish Network keys?? Yesterday i put the ones from may 13th.. i had program for like 5 minutes.. and then it stoped again.. Can anybody explain what is a difference between Dish and Bev keys[channels]// If my dish ones dosent work, how can I switch to Bev ones??/ Please help. |
|
Gold Member Username: LklivesPost Number: 9703 Registered: Jan-06 | Jake ...maybe u should stay in the disco like your username says, cause u don't have a clue about FTA...U don't even know the diff between Dishnetwork and Bev, then U don't belong here..U sound like a 10 yr old... |
|
Silver Member Username: JpzMTL, QC CAnada Post Number: 205 Registered: Jun-06 | Some of BEV channels are changing the numbers |
|
New member Username: JakeinthediscoOrlando, Fl Usa Post Number: 3 Registered: May-07 | Well i do.. i have this cloned lifetime ultra crap.. and i watched free channels for like 2 years now.. and it suddenly stoped.. I used to take keys from "maestra" site.. but now its closed.. i just need new keys, thats all.. and i am just asking ab Bev .. bc I c ppl use that,too. |
|
Gold Member Username: LklivesPost Number: 9705 Registered: Jan-06 | If U have been doing this hobby for 2 years, you would know something!...especially how to read, get keys, and websites with info.. |
|
Gold Member Username: NydasPost Number: 2745 Registered: Jun-06 | Jake: You have a Fortec Liftime Ultra with an older BIN - probably a 290T. You should look at the BIN (Menu/System Info) and change to 293T BIN. Sometimes, if you have the 290T BIN, you have to first install an older BIN such as 280T and then override it with 293T. Also make sure you have the correct date, time, time zone. |
|
New member Username: KiranapPost Number: 3 Registered: Jun-06 | 00: 13F1FD8296B87C0A7E93806A6B2566B0 (Active) 01: 53B15AD5D0FD538C6F195FDEBF78808E |
|
Bronze Member Username: Prar69Post Number: 21 Registered: Jun-06 | KP Thanks |
|
Silver Member Username: Jorge_luisMONTERREY MEXICO Post Number: 479 Registered: Jul-06 | NEW KEY ONLY 00 13 F1 FD 82 96 B8 7C 0A 7E 93 80 6A 6B 25 66 B0 |
|
Gold Member Username: LklivesPost Number: 9714 Registered: Jan-06 | Dish Network (Last Update: 2007/05/31 10:42 AM PDT) Key00: 13 F1 FD 82 96 B8 7C 0A 7E 93 80 6A 6B 25 66 B0 Active Key01: 53 B1 5A D5 D0 FD 53 8C 6F 19 5F DE BF 78 80 8E Bell ExpressVu (Last Update: 2007/05/30 1:32 AM PDT) Key00: 6B 73 F5 77 2A D2 4B 89 58 FC 76 ED 01 08 E1 9F Key01: F1 69 FA E9 5F 6E 33 94 5E 28 F3 C4 99 5A 00 F5 Active |
|
Bronze Member Username: ThorontoPost Number: 14 Registered: Jun-06 | quick question, having the new file in my extream dated 25/05. Do I still need to keep Transponder and autoroll off? thanks. |
|
Gold Member Username: LklivesPost Number: 9717 Registered: Jan-06 | 1 way to find out...go to a Dishnet channel like 300 and turn ON your autoroll and see if the new keys roll into place....be patient too...U must try things yourself...every bin and key change may bring different results..don't worry about the TP for now...or try that too AFTER this.. |
|
Gold Member Username: NydasPost Number: 2752 Registered: Jun-06 | With Viewsat Extreme and the BIN dated 23th May, you do not need to turn autoroll off. You can and should select the TP of the EPG |
|
New member Username: CdeepakPost Number: 8 Registered: Jan-07 | Viewsat Ultra just got down @ 5 p.m. any idea? |
|
New member Username: G0dm0dePost Number: 5 Registered: Jun-06 | [link removed] |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics