Archive through April 22, 2007

 

Silver Member
Username: Thunder_lightning

Post Number: 254
Registered: Feb-07
OOPS...my mistake..and thanks for the infor LK..
 

Gold Member
Username: Nydas

Post Number: 2373
Registered: Jun-06
Nasir: The Fortec Classic NA is becoming almost extict, i.e. it is not supported like the Ultra.
DO NOT USE the latest ultra BIN 293T.

The latest for Classic NA is dated around 13-15th February.

http://totalfta.com/showthread.php?t=40062
Fortec Classic N/a

This Is The New Bin.file For This "fortec Classic N/a"
LIFETIMECLASSICNA_070213.zip (648.3 KB)

If you have problems, you will have to come to terms with the reality of your receiver as a dying breed and get a new receiver.
 

Gold Member
Username: Nydas

Post Number: 2374
Registered: Jun-06
kashif wasim:
The latest Fortec Ultra BIN is 293T and is available at almost all sites. Look under Fortec Ultra or Pantec. It is 3 days old.
http://totalfta.com/showthread.php?t=48243
293 for fortec ultra - new file safe to use

File Type: zip X-85BL_070411_293T_api and Full Jtag.zip (778.6 KB)
Note again - this is for Fortec Ultra and Pansat clones. It is NOT OK for Fortec Classic NA
 

Bronze Member
Username: Shhh

Post Number: 13
Registered: Feb-07
Nalin! Thanks for the bad news. I know I have a very old receiver which is Life time classic NA.I have re loaded the BIN from 070213. But it is still not working. Can you please recomend a good receiver? I am tired of this one. Thanks
 

Bronze Member
Username: Prince

Post Number: 35
Registered: Jun-06
Hi Nadia - Could you please help me finding bin file for pansat 2700E
 

Gold Member
Username: Nydas

Post Number: 2380
Registered: Jun-06
Nasir: Sonicview 4000 has the USB flash drive which you will find very convenient. Viewsat Ultra is similar - and slightly more money.
Captiveworks 600P is reputed to be as good with a much lower price tag.
So far, there is good support for all these. Do NOT buy fortec Ultra - it will be the next one out, with the Pantecs.
 

Gold Member
Username: Nydas

Post Number: 2381
Registered: Jun-06
king : There has been a bigger change for 2700E than many other receivers. You will need to first upgrade the boot to B75 and then upload the BIN 203.
The best instructions are at
http://www.totalfta.com
 

Bronze Member
Username: Shn

Post Number: 14
Registered: Nov-06
Anyone has Dishnet New Keys?
 

Silver Member
Username: Bertoro

Toronto, Ontario Canada

Post Number: 517
Registered: Apr-05
? no changes sharon...
 

Silver Member
Username: Canndy

Www.livefta.com, Www.livefta.com Www.livefta.com

Post Number: 361
Registered: Nov-06
[link removed] - new files and keys
 

New member
Username: Lookekhoshshans_1356

Tehran, Tehran Iran

Post Number: 2
Registered: Apr-07
Hi all
Iam new here and how can help me?
I download autoroll 295 and 294 they didnot work with Ariza 700.
any one have sites to download autoroll for Ariza 700 ? thanks alots bye.
 

New member
Username: Halat

New your, Ny

Post Number: 6
Registered: Feb-07
i need NAGRAVISION KEYS

FOR DISHNETWORK

HELP ME
 

New member
Username: Rapp27

Post Number: 1
Registered: Apr-07
I have the April 11th Keys and they just went down.

Does anyone know the updated keys???????
 

New member
Username: Fizzy

Post Number: 8
Registered: Sep-06
New Keys PLEASE
 

Silver Member
Username: Bertoro

Toronto, Ontario Canada

Post Number: 518
Registered: Apr-05
guys there are no new keys..tv working fine

00: B8 46 82 2D 29 B6 25 87 8C B1 63 15 24 65 0D 8A
01: 53 B1 5A D5 D0 FD 53 8C 6F 19 5F DE BF 78 80 8E

active 01
 

Gold Member
Username: Dude123

Post Number: 1016
Registered: Jul-06
thats right they havn't changed same old keys, if you are using older bin files turn your autoroll option off


here are the latest keys anyways

Dish Network (Last Update: 2007/04/11 4:17 PM PDT)

86: B8 46 82 2D 29 B6 25 87 8C B1 63 15 24 65 0D 8A
96: 53 B1 5A D5 D0 FD 53 8C 6F 19 5F DE BF 78 80 8E

Bell ExpressVu (Last Update: 2007/04/12 3:38 PM PDT)

86: 8F 59 43 5E BA 5A 14 5E 3C 13 D3 7E 39 4F D5 8B
96: 0F 00 39 61 7E A6 E4 22 71 91 92 87 30 D4 88 14
 

New member
Username: Ajockey

Post Number: 4
Registered: Apr-07
mine still working good
 

New member
Username: Ajockey

Post Number: 5
Registered: Apr-07
went outside turn my dish about 35 d to my right
and have temp solution while keys come back
got couple of ppv,3 adult chann(important ones)

just play with the dish !!!!!!
 

New member
Username: Ajockey

Post Number: 6
Registered: Apr-07
just find out im getting most of 119 dish. channels !!!
 

New member
Username: Lookekhoshshans_1356

Tehran, Tehran Iran

Post Number: 4
Registered: Apr-07
Hi all
Iam new here and how can help me?
I download autoroll 295 and 294 they didnot work with Ariza 700.
any one have sites to download autoroll for Ariza 700 ? thanks alots bye.
 

New member
Username: Jilydon

Montreal, Quebec Canada

Post Number: 6
Registered: Jun-06
hy can u please help me out here i have fortec liftime ultra i downloaded the latest bin, when i turn in on it give me the screen like when we have to change keys, so i went to change keys i had the screen there all fffff so what can i do please let me know, nb. i reflashed and downl.new file again still no luck i rescan with blind scan i did factory setting...nothing seems to be working to change the fffffff screen...
thanks in advance
 

New member
Username: Winxbeary

Post Number: 1
Registered: Apr-07
Can anyone help me to find the code for the Pansat 2700A so that I can programme my satellite....PLZ mine is down....Really could use some help...Message me if you can show me also I am new to this. Thank You...
 

Gold Member
Username: Nydas

Post Number: 2386
Registered: Jun-06
lookekhoshshans: Ariza files
http://www.dssrookie.com/forums/b-font-color-cd2626-7xx-files-font-b/ariza-700-7 50-and-800-ar-fix-132891.html
 

Gold Member
Username: Nydas

Post Number: 2387
Registered: Jun-06
Rebel Eri: The keys are the same for all receivers.
You probably need a new BIN.
Look at my post above on Sunday, April 15, 2007 - 12:58 pm
 

Gold Member
Username: Nydas

Post Number: 2388
Registered: Jun-06
jilydon : You probbaly need to scan a satellite before you can enter keys.
 

New member
Username: Eecco

Post Number: 1
Registered: Feb-07
Bev is down, can you please give new Keys.

Thank you
 

New member
Username: 1cardsfan

Post Number: 1
Registered: Apr-07
[link removed]

new bev keys
 

Bronze Member
Username: Jerseynigga007

Post Number: 26
Registered: Sep-06
On what satellite and when do i have to scan to get the channel Turner South (Dish 500)which is now Sports South on channel 437. If i am living in the North East in New Jersey what sattelite do i have to scan????
Please help me
email me at johngotti09@yahoo.com
 

New member
Username: Lookekhoshshans_1356

Tehran, Tehran Iran

Post Number: 6
Registered: Apr-07
Hi Nalin Nyda Thanks you.
I went http://www.dssrookie.com/forums/b-font-color-cd2626-7xx-files-font-b/ariza-700-7 50-and-800-ar-fix-132891.html and also i download autoroll 295 but it doesnot have sgnal.
autoroll 295 and 294 doesnot have any sgnal.
do you have any aother sites for Ariza 700 fill to work? thank you somuch bye.
 

Gold Member
Username: Nydas

Post Number: 2392
Registered: Jun-06
Ariza xxx and fortec Classic are definitely in the way out. I can't suggest anything else.
 

New member
Username: Manitoba2117

Killarney, Manitoba Canada

Post Number: 2
Registered: Apr-07
I just turned on my set and have no signal on dishnet. I am new to this and dont really know what to do. I have a 2500 reciever. Can anyone tell me what I need to do. I have entered latest keys. Thanks in advance.
 

Gold Member
Username: Dude123

Post Number: 1017
Registered: Jul-06
Louis

what bin file are you using? if you don't know then go to menu then system info and it would tell you.
 

New member
Username: Tonytoy

Post Number: 7
Registered: May-06
Hello Nalin Nyda:

Please help step by step. (Sorry, if there are messages already, but please help me afresh).
My pansat 2500A is out. I need bin.
Also my laptop does not have com 1 port. What should I do?

Appreciate in advance.
 

Gold Member
Username: Dude123

Post Number: 1018
Registered: Jul-06
you need a usb to serial adapter, and the latest bin for original 2500 is:
x-85bl_070411_293_api.zip

and if you have a clone then its 293T

go to dssevolution dot com to get the files
 

New member
Username: Tonytoy

Post Number: 8
Registered: May-06
Thank you The One, I appreciate your help:
I just visited dssevolution.com
I could not find any link on the first page.
Do I need to register as a member on this site in order to find this zip file? How do I know that my pansat 2500A is a clone?
Thanks
 

Gold Member
Username: Nydas

Post Number: 2398
Registered: Jun-06
Key Morphing:
Everybody please note that there is key morphing in progress with DN. DN actually alters the keys in your receiver, if you have certain BINs. Only a few of the numbers of the keys in both the Key 00 and Key 01 are altered.
When you take a casual look, it seems to be the same. Check in detail, and you may find a few of the number have altered. Change them to the current key - but always with autoroll off.
 

Gold Member
Username: Nydas

Post Number: 2399
Registered: Jun-06
TJ: Whether your receiver is genuine Pansat 2500 or clone, you will be OK with BIN 293T, or BIN 288T or 289T.
You will need BL updater 1.4 - do not use anything else.
Always unzip files before using.
As The One suggested, you will need to use a USB to serial converter, and possibly a converter to get the right 9 pins at the end. You should use the USB software drivers sold with the adapter.
Read the instructions carefully - they are avaialble at many sites.
Look at the Fortec Ultra or Pantec sections for the files and instuctions. The BL updater may also be found in Pansat section.
http://www.totalfta.com
http://www.dssrookie.com

Wiht 293T BIN you should get the latest keys in automatically with your autoroll on. with 288T or 289T, you will need to have autoroll off and be prepared to enter keys manually. Also there is a greater chance of key morphing - see my post above.
 

New member
Username: Tonytoy

Post Number: 9
Registered: May-06
Thanks a lot, Nalin & The One:
I will follow all your suggestions. I am sure, I will get the adaptor also.
Thanks again,
 

New member
Username: Dish_addict

Post Number: 10
Registered: May-06
Hi,
I have DN. Can someone tell me where to locate Autoroll? Also I cannot see second pin on my parental control? Will chaning autoroll allow me to see the Second Pin option?
 

Gold Member
Username: Lklives

Post Number: 8892
Registered: Jan-06
U must SCAN the sats, which obtains and stores the channels, before U can have parental controls option for the channels..
 

Silver Member
Username: Mrskullz1

Brooklyn, New York

Post Number: 180
Registered: Feb-07
^^ wow...we got TJ then DJ then LK lol
 

New member
Username: Tonytoy

Post Number: 10
Registered: May-06
Hello Nalin Nyda and The One:
The progress so far is that, I have downloaded following files from dssrookie.com. It looks that I will be needing only first two of these files.
#1: X-85BL_070411_293T_api and Full Jtag.zip
#2: Blacklist Updater 1[1][1].4.0.0.zip
#3: GTRom Loader v3[1][1].36 [pansat3500S].zip
#4: STB Loader 2[1].1.zip

The next step is to get a USB to port adapter. I am sure I will get that too. I am done, that will be all your help guys. Long live you friends.
Thanks
 

Bronze Member
Username: Tonytoy

Post Number: 11
Registered: May-06
Hello Nalin:
These files are not being downloaded. I either get a message that the "file type is incorrect" or "serial port error".
Help please.
 

Bronze Member
Username: Rabih

Post Number: 21
Registered: Sep-06
Hey guys, I am buying a receiver and i need a second opinion! should i get the Ariza 700 or the Ariza Extreme. Thank you.
 

Bronze Member
Username: Tonytoy

Post Number: 12
Registered: May-06
Hello Nalin:
Some how the files were downloaded, but when I run it, it is not picking the channels.
When I go to Nagravision 2, I see that under 01 01, there is only key 00 and it is not changing to key 01.
Is my receiver burnt?
Please help.
 

Gold Member
Username: Nydas

Post Number: 2403
Registered: Jun-06
Rabih Khatib: Thne ariza receivers you have mentioned have the poorest of support. If budget is restricted, look at CaptiveWorks 600P. Also look at Sonicview 4000 and Viewsat Ultra.
 

Gold Member
Username: Nydas

Post Number: 2404
Registered: Jun-06
TJ: In the past, an upload of BIN 290T or 292T, if it failed, I have advised factory reset and uploading of 280T or 281T and then retry the latest.
Factory reset will also remove your user settings, so you should note them down before resetting, and restore them later. Clock date and time zone are extremely important.
Factory reset also vipes out the satellite scans, so note down the settings of the satelllite(s) scanned (Menu/installation/Antenna), particularly the DisEqC settings and restore them after a successful upload of BIN, othervise you will not get into Parental control.
 

Silver Member
Username: Jpz

MTL, QC CAnada

Post Number: 192
Registered: Jun-06
hi to all
 

Gold Member
Username: Lklives

Post Number: 8912
Registered: Jan-06
JPZ...u are a crazy SOB...thats all u ever post..192 posts of all the same greetings...lol
 

Silver Member
Username: Jpz

MTL, QC CAnada

Post Number: 193
Registered: Jun-06
so is that a problem to you LK ? or should I need new keys or other informations to say hi ?
 

New member
Username: Bosnialfa

Post Number: 4
Registered: Feb-07
Hello everyone
I have an old receiver Pan Tec Ultra,does enyone knows if they can bee fix to work again????
Thanx
 

Gold Member
Username: Lklives

Post Number: 8925
Registered: Jan-06
JPZ...I dont give a fukc how looney U are...U can say hello 100 times a day...I really don't care what U do..I was just commenting on your posts...did u have a problem with that?...U are a smart azz!
 

Silver Member
Username: Jpz

MTL, QC CAnada

Post Number: 194
Registered: Jun-06
first of al LK as U where saying it is not your fuking business, and instead of commenting on other posting just comment about yourself, and DON'T PUT YOUR NOSE WHERE IT DOESN'T BELONG,AND MIND YOR BUSINESS. And I thin the only one who have a problem is you PSYCHO. So why don't you see a shrink he might help learning some manners, maybe then you will make something to give a meaning to your life. So FUKC OFF.
 

Bronze Member
Username: Shhh

Post Number: 14
Registered: Feb-07
Is Panset 2500A and Fortectar Lifetime Classic NA are same? Are their BINs exchangeable? Some one please!
 

Gold Member
Username: Dude123

Post Number: 1023
Registered: Jul-06
Nasir

Pansat 2500 clones and forec Ultra use the same bin file but Fortec lifetime classi NA uses a different file, don't download fortec ultra/2500clone files onto Fortec Classic they use different files
 

Bronze Member
Username: Rabih

Post Number: 22
Registered: Sep-06
Hey Nalyn, what about this receiver: Eagle Star 53-2500A FTA Digital Receiver with 0614 Tuner, is it a good receiver? and what bin should I use for it?
 

Gold Member
Username: Nydas

Post Number: 2405
Registered: Jun-06
Eagle Star, to the best of my knowledge, is a Pansat 2500 clone, but is not as fast or as good as some ot the other clones. My next door neighbour has one and has had many more problems and is definitely slower than my Pantec.
 

Gold Member
Username: Lklives

Post Number: 8931
Registered: Jan-06
JPZ...U think u are a bad azz huh?...U aint shi*t h0m0!...I eat punks like u for breakfast!...U need a good beating!...and your posts are about as significant as a pimple on an azz!...go away boy, you bother me!
 

New member
Username: Gmirza

Post Number: 6
Registered: Apr-07
Hello Friends,
I need to program my Viewset remote with my Sanyo Tv(Code is 0154).Can anybody help me what are the steps??????????
 

Bronze Member
Username: Tonytoy

Post Number: 13
Registered: May-06
Hello Nalin:
Now I am watching some of the channels of Echo 3ku and Echo 7ku, but still I see only one key when I got to Nagravission 2. If I change the key 00 to 01, it remains either 00 or 01. I don't see two keys 00 and 01 as I used to see before distruption/reprogramming.

Could you please give me the exact link for the files that can correct my receiver on the dssrookie.com. I have membership there too.
Thanks
 

Silver Member
Username: Jpz

MTL, QC CAnada

Post Number: 195
Registered: Jun-06
LK instead of pretending to be a men behind your fuking screen, just be it in your life. and it seems that your like a barking dog who will shut up by itself.You're not even worthing the calories and the times that I spend answering you. And please LOOK IN A REAL MIRROR SO YOU CAN SEE YOUR REAL LITTLE SIZE, AND FIND SOMEONE OF YOUR SIZE TO PLAY CHILD GAMES WITH.
I don't have time to spend it on small little boy WHO pretend to be a men.
AGAIN LOOK IN THE MIRROR FOR GOD SAKE !!!
 

Gold Member
Username: Lklives

Post Number: 8943
Registered: Jan-06
U must be one fat lazy ignorant bast*ard if U call writing a post using calories!...and I guess your writing 192 posts of only "hello" at a satellite informational site, is something that U consider, NOT a waste of time...U are a wack job kid...go away u stupid fukc!
 

Bronze Member
Username: Tonytoy

Post Number: 14
Registered: May-06
Hi to all
 

New member
Username: 9999

Post Number: 2
Registered: Apr-07
Hello to all,
Nalin,
You help me out before and I thank you for that.
This time I need your help again.
What loader shuld I use with bin 293T,
Thanks again
 

New member
Username: 9999

Post Number: 3
Registered: Apr-07
Sorry, we are talking abaut Pansat 2500a
 

Gold Member
Username: Nydas

Post Number: 2412
Registered: Jun-06
joe vujevich : For all Pansat 2500, and Pansat 2500 clones and Fortec Ultra, use
BL Updater 1.4 and straight RS232 Cable.
 

New member
Username: Gmirza

Post Number: 7
Registered: Apr-07
Hey everyone
what is happenning why the new keys are not posted for dish network my channels are gone since last night is everyone at work or on holidays hehe just kidding............! pls someone send me the new keys for dish network Thanks
 

New member
Username: 9999

Post Number: 4
Registered: Apr-07
Thanks,Nalin
 

Gold Member
Username: Nydas

Post Number: 2415
Registered: Jun-06
DN keys have not changed. If you have an older BIN, there is key morphing going on and will affect you.
1. Switch off at back and switch on after 30-40 seconds.
2. Check all the numbers in both the keys to make sure you have the right keys.
 

Gold Member
Username: Dude123

Post Number: 1024
Registered: Jul-06
OH NO!!!! this drama again? LOL, just watch free TV and take a chill pill people!
 

Bronze Member
Username: Frobi

Guelph, Ontario Canada

Post Number: 44
Registered: Aug-06
Does DBPSW-070411X bin for VS extreme auto roll itself or auto roll should be left off?
 

Bronze Member
Username: Shhh

Post Number: 15
Registered: Feb-07
Any new BIN for fortecStar Life Time Classic NA yet?
 

Gold Member
Username: Lklives

Post Number: 8958
Registered: Jan-06
U will have to check the sites on the RECOMMENDED list thread here..
 

Bronze Member
Username: Shhh

Post Number: 16
Registered: Feb-07
LK
What is that mean please? Where is the thread list.
 

Gold Member
Username: Nydas

Post Number: 2416
Registered: Jun-06
sheel neil: Leave the autoroll on if you are using a BIN that came out in the last week or so.
 

Bronze Member
Username: Frobi

Guelph, Ontario Canada

Post Number: 45
Registered: Aug-06
Thanks Nalin. I have DBPSW-070411X bin which should take care of the autoroll.
 

Bronze Member
Username: Sekhem

Post Number: 62
Registered: Oct-06
Nasir: For the Fortec NA Classic: You have to put in the latest 3/21/07 bin and install the latest key code manually and be patient with the box. It works like a snail, but the latest bin with the correct keycode works.
 

New member
Username: Sucha

CROYDON, SURREY USA

Post Number: 1
Registered: Apr-07
DOES ANY ONE KNOW OF ANY RECEIVER WHICH CAN WORK IN U.K. FOR SKY NETWORKS. AND WHERE I CAN FIND IT.
 

New member
Username: Sucha

CROYDON, SURREY USA

Post Number: 2
Registered: Apr-07
I MEAN FREE CHANNELS NOT PAID ONE.
 

Silver Member
Username: Jpz

MTL, QC CAnada

Post Number: 196
Registered: Jun-06
hi guys, did the keys changed ? bcz It says wait for Picture? thanks an advance
 

Gold Member
Username: Dude123

Post Number: 1025
Registered: Jul-06
Nope same old keys!

Turn your autoroll off, if you are using an older bin file and enter the keys manually

Dish Network (Last Update: 2007/04/11 4:17 PM PDT)

86: B8 46 82 2D 29 B6 25 87 8C B1 63 15 24 65 0D 8A
96: 53 B1 5A D5 D0 FD 53 8C 6F 19 5F DE BF 78 80 8E

Bell ExpressVu (Last Update: 2007/04/20 6:49 AM PDT)

86: 24 97 36 62 B9 B6 72 89 24 C6 E5 00 4D 99 DA AC
96: 0E EC A6 4E E1 FE 17 07 CC 4B 21 9A 86 8B 4A E5
 

New member
Username: Sucha

CROYDON, SURREY USA

Post Number: 3
Registered: Apr-07
hi, is there anyone can help me to break the lock for sky-sports because i cant see sports its too expensive to buy that channel. thanks.
 

Bronze Member
Username: Shhh

Post Number: 17
Registered: Feb-07
Thanks lee. I will try.
 

New member
Username: Torontoman

Mississauga, ON canada

Post Number: 1
Registered: Apr-07
I have an ariza set, my keys keep changing every five minutes, can someone plz tell me what i can do to avoid that
 

Silver Member
Username: Banej

Post Number: 202
Registered: Jun-06
turn autoroll OFF and input keys manually.
 

New member
Username: Torontoman

Mississauga, ON canada

Post Number: 2
Registered: Apr-07
Thanks bane but how do i turn autoroll off?
 

Silver Member
Username: Jpz

MTL, QC CAnada

Post Number: 197
Registered: Jun-06
thank you the One !!!
 

New member
Username: Smithm

Post Number: 9
Registered: Jun-06
Hi,
Can anybody please tell me which Satellites have INDIAN and ASIAN channelS?

Thanks
 

Bronze Member
Username: Joecreosta

Post Number: 17
Registered: Jun-06
Please help me out here guys.
I have turned the AUTOROLL to OFF
and I have the latest DishNetwork codes fed into
my ARIZA 700 . Why is it still not working...?
Please help me out .
 

Bronze Member
Username: Shn

Post Number: 15
Registered: Nov-06
I have the same problem, i turned off autoroll and put in the latest keys but my channels arent on. Help me, please!!
 

Gold Member
Username: Lklives

Post Number: 8987
Registered: Jan-06
set default key..
 

Bronze Member
Username: Leines

Post Number: 15
Registered: Apr-07
why is everyone having problems.. captiveworks still rolling since like the 11th of april...

leines
 

Gold Member
Username: Lklives

Post Number: 9007
Registered: Jan-06
99% of problems are due to "operator error"..NOT bad receivers!
 

New member
Username: Torontoman

Mississauga, ON canada

Post Number: 3
Registered: Apr-07
im not getting any indian channels on my ariza set, can someone plz help?
 

Gold Member
Username: Nydas

Post Number: 2425
Registered: Jun-06
Smith Monty : Most people scan either 61.5W in th eEast or 148W in the West for Indian Channels. 121W has some and also 118.8 - the latter equires a circular LNB.
 

Bronze Member
Username: Joecreosta

Post Number: 18
Registered: Jun-06
LK ... how would SETTING DEFAULT KEY and then re-entering the CODES will make any difference if the correct CODES are already in there...? doesnt make any sense. can u explain please why
 

New member
Username: Eecco

Post Number: 2
Registered: Feb-07
bevis down any new keys please
 

New member
Username: Eecco

Post Number: 3
Registered: Feb-07
Bev is down , any new keys please
 

New member
Username: Eecco

Post Number: 4
Registered: Feb-07
anyone help, please need Bev new keys
 

New member
Username: Buf

Post Number: 1
Registered: Apr-07
Bell ExpressVu
00
CE00878F4D75379F
3E9706B0C98CD0A4
01
0EECA64EE1FE1707
CC4B219A868B4AE5
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us