can someone tell me how to enter keys in pansat 2500a do i put the 00 number first row on nag 1 00 and then do 01 and put second row then go to nag 2 and enter both rows under 00 thanks
Lizzie: Keys are always posted for Nagravision 2. Nagra 1 is not used any more. Read my post and it tells you clearly which provider ID to put the keys in. There is key morphing going on in Key 00, so althoug Key 01 is "Active", you need proper keys in Key 00.
nalin nyda iwent to nag 2 and provider id is 0101 key mumber 00 entered B846822D29B62587 8CB1631524650D8A THEN I PUT KEY NUMBER 01 ENTERED 53B15AD5D0FD538C 6F195FDEBF78808E I NEVER DONE ANYTHING WITH NAG 1 AND TRIED TO PUT IN THE B8468234 SET OF NUMBERS ALSO AND STILL SAYS WAIT FOR PICTURE I NEVER HAD A PROBLEM BEFORE ENTERING THE NUMBERS THANKS
All, These keys are working fine. I have a pansat 2700a. B8 46 82 2D 29 B6 25 87 8C B1 63 15 24 65 0D 8A
53 B1 5A D5 D0 FD 53 8C 6F 19 5F DE BF 78 80 8E
On the autoroll option, remember to leave dishnet autoroll -> ON, and the rest OFF. This is what was driving me crazy, so I hope this helps someone else. We must help each other when we can. I know Nalin has helped me many times.
My pansat 3500sd displays b-70. Can not turn off or on except from the back switch. How can I fix it? Also what bin and loader do I need to receive DN? Please help.
I have Keysoftware autochange... since 2 months my autochange has been working fine... But today dont know why it did not work... I had to enter the keys manually...
can anyone tell me please what could be the defect and how to solve so that it wont happen again. Thanks
Louis Phillips : The latest BIN for 2500 is 292T. You can also use 289T, but you will have to enter the keys manually. http://www.totalfta.com http://www.dssevolution.com http://www.dsstester*com Go to Fortec Ultra or Pantec sections. Use BL updater 1.4 for loader, and a straight RS232 cable.
Key1: Active 53 B1 5A D5 D0 FD 53 8C 6F 19 5F DE BF 78 80 8E
BELL EXPRESSVU Last Update: 4/11/07 5:20pm
Key 0: Active 8F 59 43 5E BA 5A 14 5E 3C 13 D3 7E 39 4F D5 8B
Key 1: D4 94 A2 33 DD 93 91 96 ED 3C 27 59 8E 55 90 C0
Bell ExpressVu Playb*y 0905 (Last Update: 3/15/07 10:01 AM) 86: B7 2F 03 35 70 4A CD B0 6D 43 33 59 92 E2 1D F3 96: D5 51 BA FE 58 50 BE 61 A4 BD 09 F3 54 4F C5 FC
Bell ExpressVu HD 0906 (Last Update: 3/18/07 10:17 AM) 86: 8D 1A 1C F4 2C B9 7F 85 38 65 D6 7A 5D 59 5D 88 96: 11 FE 27 1D 89 9E D3 B4 DB 8E CB C8 10 D3 E7 F7
CAS Line Code Info Cools*t: KEY Line 10 and 11 are for Idea Key 0 and Line 20 and 21 are for Idea Key 1 Pans*t: key 00 for Idea Key 0 and Key 01 for Idea key 1 Views*t: line 08 and 09 for Idea Key 0 and lines 88 and 89 for Idea key 1 For Receivers with only two Key Lines, Enter Active Idea Key into 00 and 01
Can somebody help me, I have panset2500A, put new keys and is working, but when pass aprox 3 to 5 mins keys are changing back and dont work. Put keys back, but happen again. Can somebody tell me how to fix this??
Can somebody help me, I have panset2500A, put new keys and is working, but when pass aprox 3 to 5 mins keys are changing back and dont work. Put keys back, but happen again. Can somebody tell me how to fix this??
I too am having the same problem, I put in the keys and they work, but when i turn off my autoroll i get the scrambled or bad channel message, what can i do to fix this?
*I too am having the same problem, I put in the keys and they work, but when i turn off my autoroll i get the scrambled or bad channel message, what can i do to fix this?*
I spoke to soon..LOL I turn autoroll on and it works for a minute. Then stops and is waiting for picture. UGH. I'll just wait for Hubby to get home. No toons for the little one today.
Rhonda do this....turn your autoroll off enter in new keys again...if still no picture turn your receiver off from the back for 30 seconds than turn it back on...so your little one can have some toons to watch...
Hey Thunder. I did all that. Still no picture. Maybe I broke it..LOL I will just wait for Hubby to get home. He will fix it. Thanks for helping me though
Hey guys i need help big time I guess I have overwritten the new keys on the first line by mistake which i should not have touched. and after doing that not knowing what to do with the fifth line i deleted it so now if any one is not busy please kindly send me Photo snap shot of Dish Network for ViewSat VS 2000 Platinum Thanks
Help! Auto roll works fine for Bev on my Sonicview 1000 but nothing for DN. Anyone have any reason why? I loaded the latest file 257. Can't get it to work for DN.
1. Keys are the same for all receivers. 2. Keys as posted here for Nagravision 2 - NOT Nagravision 1. 3. There are different keys for DN (Provider ID 0101), BEV (provider ID 0901), and Globecast (Provider ID C101). Some receivers might use 0001 for DN and 0801 for BEV. 4. Key 00 as posted is the same as Key 86. Key 01 as pOsted is the same as Key 96. 5. Some boxes split up Key 00 into two sections of 8 numbers (sometimes as Key 10/11) and key 01 into two sections of 8 numbers (sometimes as Key 20/21) 6. Manual Key entry should be done with autoroll off. It is preferrable to do a "set default keys" before manual entry. You would then start with a clean slate. 7. Expereinced users of manual key entry, usually change only Key 00 or key 01 as the new key is posted. This will usually work. But if you do "Set default keys" or "Factory reset" you will need to enter both sets, i.e. key 00 and key 01. 8. "key morphing" usually is done by DN and BEV on the inactive keys. So always check both sets of keys if you do not have picture. 9. Almost all the latest BINs have autoroll. If you have the latest BIN and the autoroll is on, you may want to leave it like that for even an hour for the new keys to roll in. 10. The simple process of turning off the switch at the back and turning it on after 30-40 seconds sometimes solves the picture problem. 11. Receivers of different types have different instructions for manual key entry, and for turning autoroll off. 12. If you do factory reset or load a new BIN, you should check the user settings and resore them. In particular, always check the clock, date and time zone and set it correctly. 13. Some newer receivers have a USB port. This is not for communicating with the USB port of your computer, but for loading your receiver using a USB drive. This is the preferred method in those receivers, e.g. Viewsat Ultra, Sonicview 4000. 14. There are many sites where you will find latest BIN files, instructions for your receiver foR key entry and for uploading a BIN. Refer to these sites for detailed information and for downloading a new BIN. Here are a few sites. This list is by no means exhaustive. http://www.totalfta.com http://www.future-fta.info http://www.ftabins.com http://www.al7bar*tk
Nalin - need your expert advise on this one... I have panset2500A, put new keys and is working, but when pass aprox 3 to 5 mins keys are changing back and dont work. Put keys back, but happen again. I tried turning Autoroll option OFF but that doesn't work for me. I dont get any picture even if i turn the receiver off using the back switch..
Bhaumik: You need to do a factory reset and reload the BIN. Before you do the reset, note down your user setup and the details of satellites you are scanning including details of DiseqC settings. After loading the BIN again, you will need to restore everything including the clock, time zone and ate and then rescan. For your information, new BINs are out for all pansats and pansat clones. For 2500s, I have been recommending the BINs ending with a T which are clone safe. The latest is 293T. Use the serial version '" not the jtag version.
Clonesafe BIN for Pansat 2500 clones and Fortec Ultra X-85BL_070411_293T_api and Full Jtag.zip
i can't seem to get any other web sites up, does anyone know the new keys for BEV? I tried the keys that were given above but nothing happened, still scramble channel! Please help
roxanne....turn tha autoroll of n put keyz in girl....it should work fine
i have latest bin on viewsat which autorolls.... the new NORW 143 file that is out today should also autoroll for you...try loadin that one for koolsat 6k 070412
If your autoroll is not working then i suggest you people download the latest bin file that came out yesterday? For all pansat receivers, new bins are out and they are on future-fta dot info
All of the new files for pansats are tested and working great, so if you don't want to put in the keys manually i would suggest you flash your receivers with the new files that came out. Its not just autoroll fix. Its scans super fast as well. so ya its a great quick fix.
The One: i got two new bins from two different sites can you tell me which one is the new bin for pansat 2700e X-87BL_070104_290_api OR X-87BL_070119_291_api
V: The BIN files for Pansat 2500 clones as posted at the CCC site are always posted in twos. The serial load is the one we would normally use with BL updater 1.4 and striaght RS232 cable. The other file is for J-tagless installation, for which you can get instructions at many sites but is rarely needed.
D C: I am surprised that you could not find the files at all those sites. The sites are all very busy and you might have read the message that the servier is busy and come later.
