I am using a very old bin still working except for autoroll . BIN 1.21 Should i upgrade ?? Whats the latest bin?? Not broken . Do I Fix. Can i upgrade direct from old bin or do i need to do it in stages with the other bins.
jim you need put the new bin in it has auto roll and is working good the cw you got is 600s not 600p right ill go and let you no witch bin is the new one but this is a good site to go get all the files you will need and you might wont to put in other bins first im not sure go to this site future-fta.info i have cw600p and you do not have to put in all bins just the bins you want hope this will help you
The following does not apply to the Captive Works Premium reciever.
The new CaptiveWorks 600s REGULAR reciever comes loaded from the factory with the Kround OSD. If you just got a new one, these are the instructions. (If it is old, you may have to reffer to these instructions, and ask someone in the forums for some help:http://www.future-fta.info/Forums/sh...d.php?t=20290)
1. Get the current 1.05 loader here: http://www.future-fta.info/Forums/sh...ad.php?t=20296
2. Download the latest bin from here (top bin; highest bin number): http://www.future-fta.info/Forums/fo...play.php?f=176
3. Load the latest bin (from above) with the current loader (from above) as per these instructions:
Open 1.05 loader, select the latest bin in the "File" bar across the top. For Options, select Download S/W. For Select a port, choose your COM port (usually 1).
Prepare reciever: Turn off and attach the null-modem cable between the reciever and the computer serial port. Turn back on. With the CaptiveWorks 600s REGULAR reciever on, press the front power button and hold it. While holding it, turn off rear toggle switch, then turn on again while STILL holding front power button. You will see "boot" on the front display. At this point, remove your finger from the front power button and press "start" on the 1.05 loader. Wait for the reciever to display "-end". At this point, turn reciever off at rear switch, and then turn on again.
4. Perform Factory Default: Using Remote, press: Menu, Installation, Factory Default, All, ok, yes, ok.
5. Setup the reciever:
Select language Select GMT time (-5.00 is Eastern), summer off in winter. Search channel
Set DiSEqC switch ports and scan. Upon completion, press F1 key (you will notice an "h" on the front panel display), and "000" to enable the patch. (repeat with "555" to enable cardshare). Allow time for keys to roll.
Setup up OSD options:
Menu System Settings System Channel NO. - SID Key Update Message - Off B**andD**hnet Full Name - ON
Menu System Settings OSD Auto Exit Channel List - YES Channel List - CH 10 (appears when you press OK button, lists 10 channels, or 24)
Now, you don't have to select these options, but I do recommend them. Thanks to the other Mods who contributed to this thread. For more info regarding the Captive Works 600s Regular/Normal (not premium) reciever, visit our stickies: http://203.169.142.72/~future/Forums...play.php?f=172