Archive through January 16, 2007
|
Silver Member Username: AbjPost Number: 416 Registered: Feb-06 | make sure the provider ID is 0901 for bev |
|
New member Username: MomanrocksSt.catharines, Ont Canada Post Number: 3 Registered: Jan-07 | ok so now all i need is the numbers right all 32 of them since i changed them all i dont know what the originals were |
|
Bronze Member Username: BiverlandPost Number: 70 Registered: May-06 | Bell Exp. V. 00 DE CF 2E 17 99 7F 69 74 46 35 E6 28 75 24 F4 C0 01 C3 95 97 66 77 44 9B 5C BD 19 ED 78 F9 96 1F CA  |
|
New member Username: MomanrocksSt.catharines, Ont Canada Post Number: 4 Registered: Jan-07 | thanks i will try these. i used to have auto roll on and it was good for awhile does this now mean my auto roll is pooched |
|
New member Username: MomanrocksSt.catharines, Ont Canada Post Number: 5 Registered: Jan-07 | still nothing crap...... will try again tomorrow thanks 4 the help guys |
|
New member Username: Angry_jattPost Number: 3 Registered: Jan-07 | new keys anyone? keys posted by mbenz dont work. thanks. |
|
Bronze Member Username: Eatfish111Post Number: 61 Registered: Dec-06 | Here is the active key for bev. go to ftamorvex.com for latest keys and files. Key 00, 86: DE CF 2A 17 99 7F 69 74 46 35 E6 28 75 24 F4 C0 |
|
Gold Member Username: NydasPost Number: 1211 Registered: Jun-06 | Keys, BINs and receivers: Keys are same for all receivers. DN ID for key entry is 0101 BEV ID for Key entry is 0901 Globecast ID for Key entry is C101 For the past two weeks there may be some hidden key morphing making it very difficult for you to enter the keys, if you have an older BIN. For example, if you have BIN 284T on a Pansat 2500 clone, you will have difficulties entering keys manually. Therefore I suggest you change to BIN 287T, the current one for Pansat 2500 and clones. There are new BINs out for most of the receivers. If you have the latest autoroll BIN, the keys should come in automatically, without a need for entering them manually. You should check and make sure you have right time and zone, because the receiver may freeze up during EPG scan if you do not have the correct time and date. If the autoroll does not work, use the following sequence. 1. Turn autoroll off for BEV and for DN. 2. Click on Set default keys. This will bring some very old useless keys. 3. Now turn receiver off at the back and 40 seconds later turn it on. 4. Go into Nagravision 2 and enter your keys for DN or for BEV as appropriate. Make sure you enter all 16 numbers (32 digits) for Key 00 and same for key 01. SAVE 5. Exit, Exit Exit, Exit. If necessary, do a switch off and on using power switch on the receiver. Active and inactive keys. We use the word Active for the latest keys that have changed (Key 00 OR key 01). In reality, you have to have the correct Key 00 and Key 01 for the receiver to work. |
|
Bronze Member Username: BiverlandPost Number: 71 Registered: May-06 | 00 95 40 18 2B 12 2D B7 6C B6 64 E4 5F D5 55 56 3B 01 C3 95 97 66 77 44 9B 5C BD 19 ED 78 F9 96 1F CA  |
|
Silver Member Username: Mc_sunnyPost Number: 961 Registered: Feb-06 | mbenz, why u posting old keys, those keys are like 2 days old Bell New Keys : key0: DECF2A17997F69744635E6287524F4C0 Key1: 0163FF4D831AAA8BBC286B09BFDF0E42 <-Active |
|
New member Username: LribonLondon , On Canada Post Number: 6 Registered: Jan-07 | have a panset 2500A, with a bell dish and 2 lnb, sat 110-119 with 65% and 72% of signal, need the keys, Key0: 7B A3 12 F7 A3 07 68 38 87 2D E3 D5 A1 09 51 11 Key1: C6 3E 92 9C 14 C0 41 41 05 7A FC 35 A4 4D 0E 8A This ones dont work I just install everything, can somebody help me with this??? |
|
Bronze Member Username: BiverlandPost Number: 72 Registered: May-06 | Dish key: 00 7B A3 12 F7 A3 07 68 38 87 2D E3 D5 A1 09 51 11 01 C6 3E 92 9C 14 C0 41 41 05 7A FC 35 A4 4D 0E 8A  |
|
New member Username: LribonLondon , On Canada Post Number: 7 Registered: Jan-07 | I did those keys but i didn't receive any quality signal, Levels are in 63% and 71% but in quality in both sat are 0%, can somebody can help me to see how i can fix this???? I insert those codes in nagravision2. Please help me thanks |
|
Gold Member Username: LklivesPost Number: 7083 Registered: Jan-06 | These keys are working and good for Dishnet and Bev...FOR ALL RECEIVERS! Dish Provider 0101: (Last Updated Jan08 8:36pm EST) Key0: 7B A3 12 F7 A3 07 68 38 87 2D E3 D5 A1 09 51 11 Key1: C6 3E 92 9C 14 C0 41 41 05 7A FC 35 A4 4D 0E 8A (Active) Bev Provider 0901: (Last Updated Jan13 11:19) Key0: DE CF 2A 17 99 7F 69 74 46 35 E6 28 52 F4 C0 Key1: 01 63 FF 4D 83 1A AA 8B BC 28 6B 09 FD 0E 42 (Active) |
|
New member Username: LribonLondon , On Canada Post Number: 8 Registered: Jan-07 | i have a Bell ExpressVu antenna. Thanks |
|
New member Username: LribonLondon , On Canada Post Number: 9 Registered: Jan-07 | Can somebody tell me if I have those keys and everything, what could be the problem??? I have a bell ExpressVu antenna with 2 LNB's, Levels on sats are 65% and 71% but quality is 0%. Have a Panset2500A. Help please, Im new in this. Thanks |
|
Gold Member Username: NydasPost Number: 1213 Registered: Jun-06 | luis ribon : Earlier this morning at 9:13, I posted some special details regarding the type of problems you are having. Hav ytou tried to follow the instructions? What receiver and BIN are you using? |
|
Silver Member Username: Albino_midgetPost Number: 390 Registered: Jul-06 | is the bell antenna aimed at the dish birds or the bell birds. |
|
New member Username: Crazy416Post Number: 2 Registered: Jan-07 | thanks |
|
Bronze Member Username: HusPost Number: 49 Registered: Sep-06 | Hey guys I tried loading up my viewsat xtreme, but it keeps saying resending ZRQINIT than goes to frame type and back to ZRQINIT staying at 0% i loaded the .prg file first than the .cha file than the .sat file using the loader2 program...i see the front of the reciever doing 00.01, 00.02, 00.03 and so on but the % of bytes in the loader isnt changing.plz help |
|
Bronze Member Username: HusPost Number: 50 Registered: Sep-06 | ps i did wait for the mssg ZRQINIT to come on before turning on the reciever |
|
Bronze Member Username: TypertegraVancouver, British Colu... Post Number: 17 Registered: Oct-06 | is LK still sleeping? everytime i come here, the codes are messed up or wrong, theres only 15 pairs of code for bell WTF |
|
Bronze Member Username: TypertegraVancouver, British Colu... Post Number: 18 Registered: Oct-06 | C/O MC Sunny Bell New Keys : key0: DECF2A17997F69744635E6287524F4C0 Key1: 0163FF4D831AAA8BBC286B09BFDF0E42 <-Active |
|
Silver Member Username: Pathfinder191Post Number: 149 Registered: Mar-06 | Did anyone try bin 290 for ariza 750 yet? If so, please post your experience. Thanks in advance. |
|
New member Username: LribonLondon , On Canada Post Number: 10 Registered: Jan-07 | Is the Directv antena compatible with dish LNB's???? I'm triying to solve a problem that i have, My box works good in a friends house, but when I install in my house Im receiving signal of 75% in level but non in quality. Could somebody knows what its wrong????? I change my Bell expressVU antenna for a directv one, and have same problem. |
|
New member Username: Hjaved916High point, Nc Usa Post Number: 2 Registered: Jan-07 | i am having problems with my satellite. the reason is because i set it up according to the program. the channels come up but there is no picture. it tells me to wait for a picture but nothing shows up. what shall i do? thanks. |
|
Bronze Member Username: FreeloadPost Number: 23 Registered: May-06 | help need new key for bev |
|
Bronze Member Username: FreeloadPost Number: 24 Registered: May-06 | new key please |
|
Silver Member Username: Mc_sunnyPost Number: 964 Registered: Feb-06 | There is no New Keys buddy, Working keys already been posted...so just look above and u will find ur way |
|
Bronze Member Username: ArdiPost Number: 28 Registered: Nov-06 | javed you don't have the right keys check them they are posted above |
|
Bronze Member Username: Colo_coloPost Number: 54 Registered: Jun-06 | what are the new keys?? |
|
Bronze Member Username: Nub2ftaN/a, N/a Canada Post Number: 20 Registered: Aug-06 | mc sunny.... sorry but these are dead...,at least for me. tried 2 times, no luck. - These keys are working and good for Dishnet and Bev...FOR ALL RECEIVERS! Dish Provider 0101: (Last Updated Jan08 8:36pm EST) Key0: 7B A3 12 F7 A3 07 68 38 87 2D E3 D5 A1 09 51 11 Key1: C6 3E 92 9C 14 C0 41 41 05 7A FC 35 A4 4D 0E 8A (Active) Bev Provider 0901: (Last Updated Jan13 11:19) Key0: DE CF 2A 17 99 7F 69 74 46 35 E6 28 52 F4 C0 Key1: 01 63 FF 4D 83 1A AA 8B BC 28 6B 09 FD 0E 42 (Active) |
|
Silver Member Username: Mc_sunnyPost Number: 965 Registered: Feb-06 | Nub2fta those are the current keys at this moment.. Wut kind of msg u get after putting keys in ? |
|
Bronze Member Username: Nub2ftaN/a, N/a Canada Post Number: 21 Registered: Aug-06 | all is up now. |
|
Silver Member Username: Mc_sunnyPost Number: 966 Registered: Feb-06 | lolz Glad to hear it...Enjoy now |
|
Gold Member Username: NydasPost Number: 1214 Registered: Jun-06 | Javed and Vic https://www.ecoustics.com/electronics/forum/home-video/259083.html#POST1003273 |
|
Bronze Member Username: Nub2ftaN/a, N/a Canada Post Number: 22 Registered: Aug-06 | b4.... searching signal..... I then went to the ad channels either 100, 9946, waited for it to come up, now it works |
|
Silver Member Username: JpzMTL, QC CAnada Post Number: 138 Registered: Jun-06 | hi guys |
|
Gold Member Username: LklivesPost Number: 7089 Registered: Jan-06 | fricking retards who can't input keys manually..U should ALL subscribe!...LOL...any MONKEY can do it! |
|
Gold Member Username: NydasPost Number: 1215 Registered: Jun-06 | LK: You are the monkey. Buzz off. |
|
Gold Member Username: NydasPost Number: 1216 Registered: Jun-06 | LK: Nobody wants you here, so go somewhere else to chase your phantom enemies. |
|
Gold Member Username: LklivesPost Number: 7097 Registered: Jan-06 | Nalin...blow me!...maybe U can do that right...cause U sure as hell can't do FTA!... why don't u get a job so U aren't here 24/4...and don't give me your BS that U have this BIG SHOT BS "se the world traveling" job, because no matter what U say, U wouldn't be here 24/7 if that was trie...admit it, U are a BUM, trying to impress everybody... I can honestly say I am RETIRED 30 MILITARY and DO haver the time to be here 24/7 if I want to!...and everybody here knows that I do Know about FTA...so FUKCK OFF NALIN! |
|
Gold Member Username: NydasPost Number: 1218 Registered: Jun-06 | LK: You have been drinking all weekend. We don't want drunks or maniacs here. Did you forget to take you Citalopram? |
|
New member Username: JedimastermoparPost Number: 9 Registered: Jan-07 | can't we all just geta long and watch some free prn on tv? |
|
Gold Member Username: LklivesPost Number: 7102 Registered: Jan-06 | U are suck a LOSER and azzhole...I told U, I don't drink...but if I did, so what!...u are a stupid MF!...get a job azzhole! |
|
Gold Member Username: NydasPost Number: 1221 Registered: Jun-06 | Jedi: You don't know this guy LK. He wanders into all the threads and ruins those where he can't post properly. He has tried to ruin this thread three or four times. I wish we could get along wit him but nobody can. He gets to drining and then starts posting trash. |
|
Gold Member Username: LklivesPost Number: 7106 Registered: Jan-06 | LMAO...Nalin U are such a ....  |
|
Bronze Member Username: JedimastermoparPost Number: 11 Registered: Jan-07 | honestly lk you did hijack a very interesting thread I started. |
|
Gold Member Username: NydasPost Number: 1224 Registered: Jun-06 | LK: You better take your Citalopram otherwise you will be in a worse shape tomorrow. |
|
Gold Member Username: LklivesPost Number: 7110 Registered: Jan-06 | jedi...every thread here has been HIJACKED!.....wake up and look around!....anybody SERIOUS about FTA would NOT come here!...there NOT even ANY files here!...so this is a BS chat board basically!...its NOT a DSS forums! This is a place for LOSERS like Nalin to pop a nut with their ego's and srupidity trying to impress the newbies who KNOW absolutely nothing!!...if they had half a brain, they would use the thread of REPUTABLE DSS sites, NOT this site! |
|
Gold Member Username: NydasPost Number: 1231 Registered: Jun-06 | Jedi: Don't worry about this thread. LK has tried to highjack it at least three times and not succeeded. It is the life line of a many a newbie and it WILL remain. so LK, BUZZ off. |
|
New member Username: UshaUnited States Post Number: 4 Registered: Nov-06 | Nalin Nyda:Could you tell me if there is any hope that i can get all the channels,right now i have only the locals,its been 3 months since i had all the channels. I have a fortec classic not the ultra,is there any chance i could get them all. Thanks in advance. |
|
Silver Member Username: Ke5aqnShawnee, OK USA Post Number: 291 Registered: Sep-06 | Usah go Also by asking here in the "new keys" thread you are hijacking a thread next time in the main sat section HEREstart a new thread. thanks |
|
Gold Member Username: NydasPost Number: 1232 Registered: Jun-06 | Usha: Forect classic is not a very popular receiver no. The latest BIN file for it can be found at: lifetimeclassicna_061209, Improved Auto-roll You should be able to get most channels with that BIN. Also look at You will need to register at these sites. Make sure you find the instructions there and download those, and also the uploading file. The files you download will be in zipped format and you should unzip them using winzip.exe from www.winzip.com |
|
Bronze Member Username: Eatfish111Post Number: 66 Registered: Dec-06 | all the latest keys and files can be found at |
|
Bronze Member Username: JamalrahimPost Number: 27 Registered: Jun-06 | Dear Nalin, i am trying to install a st#rch*ice elliptical dish with dual lnbs with a viewsat ex i can locate sats however unable to scan any channels and only 45% quality, altough when connecting a standard 18" dish i am able to do a full scan, i do not have the st#rch*ice lnb with me at the moment it does state for use with 60c reciever only, could you please guide me in the right direction. ty |
|
Bronze Member Username: Jerseynigga007Post Number: 23 Registered: Sep-06 | DOES ANYONE HAVE "STUBDATER" TO PUT THE FILE IN THE RECIEVER. IF U DO PLEASE EMAIL IT TO ME AT "patelboy791@yahoo.com". THANX}}} |
|
New member Username: Hjaved916High point, Nc Usa Post Number: 3 Registered: Jan-07 | we have a fortec star dish box and we dont know how to put in the keys for the dish into the bin and then get the keys it into the box. can you please tell me how to do that? |
|
New member Username: Hjaved916High point, Nc Usa Post Number: 4 Registered: Jan-07 | we need an easier way to put keys into the bin for our fortec star dish box.we put the keys in so many times and still we get no picture.can u help me. |
|
Gold Member Username: NydasPost Number: 1233 Registered: Jun-06 | Javed you prpbably have an old BIN. Install the latest BIN and you should be OK. |
|
Gold Member Username: NydasPost Number: 1234 Registered: Jun-06 | Jersey Nigga: Just post the name of your receiver and the current BIN you have. |
|
Gold Member Username: NydasPost Number: 1235 Registered: Jun-06 | jamal rahim: Use your Dish as a passive device. The LNBs that came with it are no good for DN or BEV, which is what you need. You will need to get new LNB and then point either to 119W and 110W for DN or 91W and 82W for BEV. You can get the job done for about $50 plus cost of LNBs and DiseqC switch from professional installers. If you want indo-pakistani channels, you will need a separate dish pointing to 61.5W or 148W or 121W |
|
New member Username: Nehal_3278C, D C Post Number: 2 Registered: Dec-06 | WHAT IS THE NEW KEYS FOR BEV |
|
Bronze Member Username: Aafl_dragonPost Number: 31 Registered: Jun-06 | Bev Provider 0901: (Last Updated Jan13 11:19) Key0: DE CF 2A 17 99 7F 69 74 46 35 E6 28 52 F4 C0 Key1: 01 63 FF 4D 83 1A AA 8B BC 28 6B 09 FD 0E 42 (Active) |
|
Gold Member Username: NydasPost Number: 1236 Registered: Jun-06 | Dish Provider 0101: (Last Updated Jan08) Key 00 (86): 7B A3 12 F7 A3 07 68 38 87 2D E3 D5 A1 09 51 11 Key 01 (96): C6 3E 92 9C 14 C0 41 41 05 7A FC 35 A4 4D 0E 8A Bev Provider 0901: (Last Updated Jan13) Key 00 (86): DE CF 2A 17 99 7F 69 74 46 35 E6 28 75 24 F4 C0 Key 01 (96): 01 63 FF 4D 83 1A AA 8B BC 28 6B 09 BF DF 0E 42 |
|
New member Username: GastrognomePost Number: 8 Registered: Dec-06 | Dish Network (Last Update: 2007/01/08 5:36 PM PST) 86: 7B A3 12 F7 A3 07 68 38 87 2D E3 D5 A1 09 51 11 96: C6 3E 92 9C 14 C0 41 41 05 7A FC 35 A4 4D 0E 8A Bell ExpressVu (Last Update: 2007/01/15 11:46 AM PST) 86: 28 2E C5 6F 97 8C 8F 84 BA 92 8F 02 90 93 BE 1A 96: 01 63 FF 4D 83 1A AA 8B BC 28 6B 09 BF DF 0E 42 |
|
Bronze Member Username: GusificationPost Number: 25 Registered: Nov-06 | plz help keys r down |
|
Silver Member Username: Ke5aqnShawnee, OK USA Post Number: 300 Registered: Sep-06 | Nalin Nyda and others Please stop helping users that hijack this thread. This is the new key's thread. If a user has a question concerning bin's, files, receivers, LNB's just tell them nicely to please start a new thread. We need to get control back to this forum and we need your help. |
|
Bronze Member Username: GusificationPost Number: 26 Registered: Nov-06 | hey jay cna u help me out i just can get anykeys cus i have the keys o but dont work |
|
Silver Member Username: Ke5aqnShawnee, OK USA Post Number: 301 Registered: Sep-06 | Gustavo start a new thread with all your info (receiver, sat's, whats wrong etc)and I will be glad to help you. |
|
Silver Member Username: BertoroToronto, Ontario Canada Post Number: 461 Registered: Apr-05 | gustavo vete al foro de español...alli te ayudamos...que te pasa? |
|
Silver Member Username: Ke5aqnShawnee, OK USA Post Number: 302 Registered: Sep-06 | How to start a new thread from here this in on the top of this page  clicking on the word's SATELLITE TV will take you to the main satallite forum.  |
|
Bronze Member Username: TypertegraVancouver, British Colu... Post Number: 19 Registered: Oct-06 | LOL @ LK your hillarious man, just relax, its only a forum. your talkin about people who dont know how to put in the keys, maybe if you posted all 16 it wouldnt be difficult for them. |
|
Gold Member Username: NydasPost Number: 1242 Registered: Jun-06 | Jay: This thread has been going for a long time. It has been maintained by me, The One, Smart 1, Minn Rock and many others. We take a broad interpretation of the phrase "New Keys". People come here asking for new keys because they don't have TV. We help, whether it is 'New Keys" the need or new BIn or a broad range of problems. We have a prime directive of helping people getting their TV going and we have done very well with a lot of help from many people. We accept people at their face value and try not to look down upon them. They need help - we help if we can or stay quiet. Sometimes we direct people to useful information elsewhere, but often we bring it here if possible. |
|
New member Username: Vasu_vijayPost Number: 1 Registered: Nov-06 | Iam a new member from Canada.The sun tv programs in Dish Network are not working properly.The timings changed suddenly.It is showing a 10hour difference.Can any body tell me if there is any problem please. |
|
Silver Member Username: CanndyWww.livefta.com, Www.livefta.com Www.livefta.com Post Number: 113 Registered: Nov-06 | [link removed] Bev keys changed |
|
New member Username: ParathesiPost Number: 2 Registered: Oct-06 | Vasu, There is no any Problem In Sun TV Program. The One you're watching in Sun Tv to day or now is directly from India. You Know the difference between Canada And India is +10 hours .That means we are watching tuestday programs as telecasting in Tamilnadu.India. |
|
New member Username: Vasu_vijayPost Number: 2 Registered: Nov-06 | Hi Sundar, I was watching Anniyan movie and it was telecasting as Iam watching Monday evening programs as per my time,Suddenly It changed to the tuesday programs.Suntv was telecasting as per my local time in Toronto.Is there any problem in the California server?Thanks in advance |
|
New member Username: Vasu_vijayPost Number: 3 Registered: Nov-06 | Thanks,It is working properly. |
|
New member Username: ParathesiPost Number: 3 Registered: Oct-06 | Vasu , You are right. Whenever they have tecnical difficulties in California Server (or Relay)Sun TV switches directly to the main point of access . And this happning is not the first time . Annian is gone for now , another time we will watch it. Thavil is great!!! enjoy it.I'm joking |
|
Bronze Member Username: Skz720Post Number: 22 Registered: Dec-05 | Can anyone help me, I have a Pansat 2700a and i have turned auto roll off and left the keycode on and put in the keys in the correct order and place but im still getting a "no signal" sign on the screen. I don't know what to do? Can anyone help me? |
|
Gold Member Username: NydasPost Number: 1243 Registered: Jun-06 | KZ: What BIN do you have? |
|
Silver Member Username: BertoroToronto, Ontario Canada Post Number: 466 Registered: Apr-05 | kz..do u have key 01 as active? |
|
Bronze Member Username: HusPost Number: 55 Registered: Sep-06 | Hey guys im unable to get epg on my viewsat extreme, i put the correct date and time but still get nothing |
|
Bronze Member Username: SokolPost Number: 18 Registered: May-06 | Nalin, Live FTA or anyone on this forum. I have posted this message few weeks ago and am still trying to find a fix for Globecast on pansa2700. I have loaded the latest bin but still, Setanta Sports, TVPolonia or other channels are not working. Livefta.com, I checked your links but there I is now fix on that site for Pansat 2700. Do you know if fix is coming? I would appreciate your assistance. Thanks in advance. Sokol |
|
Bronze Member Username: Yarda_666Post Number: 17 Registered: May-06 | is it down??? i cant get fox w |
|
Gold Member Username: PrfrmnjPost Number: 1340 Registered: Oct-05 | Hus-Viewsats adjust the time automatically (which is the recommended way), but you need to make sure you adjusge the time zone. Example: I'm in the east coast so I have to be at -5:00 hours. Make sure you adjust your time zones. |
|
Bronze Member Username: Eatfish111Post Number: 69 Registered: Dec-06 | sokol there is no fix for globecast for the 2700 not even updated codes for it. to get the latest keys and files register for free at. |
|
Bronze Member Username: HusPost Number: 58 Registered: Sep-06 | Hey guys is there a working Globecast bin for viesat extreme? i loaded the one from total fta.c om but the screens just black. If the keys have changed can someone please post the new ones? |
|
Gold Member Username: PrfrmnjPost Number: 1358 Registered: Oct-05 | Hus - Totalfta is the home of viewsat. If that bin doesn't work, I don't think you will find one. All bins posted around the net originated at totalfta... |
|
Bronze Member Username: HusPost Number: 60 Registered: Sep-06 | damn...alright man thnks |
|
Gold Member Username: PrfrmnjPost Number: 1366 Registered: Oct-05 | Hus - If there is going to be a working file for it. You will find it at total. |
|
Bronze Member Username: SokolPost Number: 19 Registered: May-06 | thanks for the info eatfish. I'll try and let you know the findings S |
|
Gold Member Username: LeewXXXX!!WWWW, Yokosuka, ... Holla Back Y... Post Number: 1296 Registered: Jan-06 | Hey sokol! Habla Ruso...Ti razgovarivat na russkom? Kak dela? |
|
Bronze Member Username: Michelle27272Post Number: 14 Registered: Nov-06 | new keys? |
|
Gold Member Username: NydasPost Number: 1244 Registered: Jun-06 | DN - Provider ID 0101 - 14th January, 2007 Key 00 7B A3 12 F7 A3 07 68 38 87 2D E3 D5 A1 09 51 11 Key 01 C6 3E 92 9C 14 C0 41 41 05 7A FC 35 A4 4D 0E 8A **--**--**--**--**--**--**--**--**--**-- Bev - Provider ID 0901 - 16th Jan., 2007 Key 00 28 2E C5 6F 97 8C 8F 84 BA 92 8F 02 90 93 BE 1A Key 01 12 29 12 48 B9 FE F4 07 CC 1C AD CB 1A AF 0A D2 |
|
Bronze Member Username: MaferPost Number: 11 Registered: Jun-06 | Hello, i have a pansat 3500s, i can`t see abcwest, nbcwest, foxwest nor cbswest, do you know why??? what happened??? |
|
Bronze Member Username: RossyPost Number: 13 Registered: Jun-06 | have the keys changed recently? those keys are from Jan 8th |
|
Silver Member Username: BertoroToronto, Ontario Canada Post Number: 467 Registered: Apr-05 | yes Rosy they are working....date has nothing to do with it |
|
Silver Member Username: CanndyWww.livefta.com, Www.livefta.com Www.livefta.com Post Number: 114 Registered: Nov-06 | Bev Keys: Last: Jan 16 17:50 Key 00, 86: 28 2E C5 6F 97 8C 8F 84 BA 92 8F 02 90 93 BE 1A Key 01, 96: 12 29 12 48 B9 FE F4 07 CC 1C AD CB 1A AF 0A D2 KEY 00 00: 28 2E C5 6F 97 8C 8F 84 01: BA 92 8F 02 90 93 BE 1A KEY 01 00: 12 29 12 48 B9 FE F4 07 01: CC 1C AD CB 1A AF 0A D2 [link removed] |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics