Mc Sunny or The One Can you please Help me. I have loaded the bin & the keys in my Cools*t 5000 platinum receiver they were <<coolsat5000_norw_136_20061108.stb>> and <<11-27-8pmsoftcam.key>>
But its not working.. Can you tell me if I missed something or wat..
I have a cool**t 6k and my autoroll is working fine but I cannot get any PPV. Do I need the new bin 136? I am using 135. Where do I get the 136? I have looked and cannot seem to find it.
Nalin Nyda thanks for your help I know that is on Globecast TV but someone told me that you can watch through BEV or dish but how to get it I dont know. I know people watch without paying lots of them but they buy (Receivers) directly from people in Toronto or Ny which they give them keys and a keygen for that. Thanks againe Nalin Nyda I appreciate for trying.
hi yea my zee tv B4U and most of other indian channel aren't work only like 4 are can any 1 help me like i have foretec ultra life time and i have 286 bin and newest code and aslo i use echo 3 and 7
Is there anyone near Columbia, Missouri that has DN, my buddy gets alot of scrambled channels, Foxsports, ESPN, PPV! anyone know anything that can help!
yeah Fadil I am in On too people are watching but they are buying the receivers from a guy in On( which works for RTV21) who installes an autoruller and than its fine because it wont go down that much maybe once a year.We will find a way how to get them but it may take some time.
THe above keys are working fine (confirmed) make sure you enter them correctly. if you are still not getting the channels, then turn it off from the back swith and turn it back on after a min. It should do the trick.
Reading these posts, I am just re-posting this from other tr.: Thanks VS's (Xtrm) autoroll is still working, great ! So far I have not regretted buying VS in September and let PanS 2700 sitting idle in my basement (don't have the time to fiddle with it). One thing I am puzzled about is why some people (if they using receivers with not working autorolls) are waiting for new keys to be posted on forum(s), when it's so easy, convenient and usually fast(er) to get the keys from programs like Keymaster or Keygrabber. I don't know much about Keygrabber, since I have not used it, but Keymaster is working great, (although it was out of order few days ago). I have a shortcut on my desktop (just in case), and all it takes is one click - and keys are on in about 2sec. flat.
Ya all you have to do is download an autoroll bin and you are set, Even pansat 2700 is doing pretty good with the autoroll right now with the bin 288, rolls with in seconds, channel change speed is excellent too. Finally blacklist came up with a good bin.
"Dude123" I am kind of trying to help, since this site "saved me" couple weeks ago, when Keymaster quit working and most of the other well known dss sites were overwhelmed by people it was almost impossible to get on.
} Nalin Nyda Mc Sunny The One THANK YOU VERY VERY Muchhhhhh !!!... All my channels are Workinggg.. Am Soooooo HAPPYY... You are Very Helpfull.. U All Deserve BIG Big Kissssss..... Muaaaaahhhh !!! Muaaaahhhh!!!! Muaaahhhh !!!}}}
I am new to this group. I would like to know how to get English channels. The transponder that are showing against those channels (For example seeing thorough TP Scan) is showing a level of 85 to 90%, but the quality is zero. What i am doing wrong.
If people in Ontario are watching globecast on a regualr 18-20" dish, the only thing I can think of is this: The 286T BIN for Pansat clones has under Nagravision 2. When you go in, change the program ID to C1 01
The last known keys for this ID are as follows: Provider ID C101-C001 Key 00: EB 4A C4 1A 45 5B DD 23 54 7E EF 4B 3A BF 4D 62 Key 01: 83 20 3C A8 E5 7B 93 A6 7B 12 67 AB 40 62 03 B1
It is a long shot, but if you ar pointing correctly it might work.
Autoroll BIN: It is now abudantly clear that the autoroll BINs work most of the time. My suggestion is that we accept the situation, and congratulate the programmers such as BL and Chancynand for their efforts and use the autoroll BINs. There will alwasy be the odd time when autoroll does not work and we can input the keys manually.
Raghu, The most likely cause is that your Diseqc swithc is not connected properly in the software. If you have a swithc, you must set the switch connectionin the software identical to the hardware switch setting. You can aslo do a blind scan and see if you get the channels.
Nalin.. hooo everything were working Super.. SUDDENLY it say No Or BAd Signal... Level & Quality % is completely REd Very Slow.. Can You tell me Wat could have happen ?? what should I do Now.
Yes, Congratulations and many thanks. You saved everyones time in manually entering keys three to four times a day.
Also, the following will be helpful, for those autoroll is not working. (This is how i made to work, there may be other options, but worth the try)
Enter the keys, make the picture to appear. Set the Autoroll for DN to ON Then select the option default key. The system will say wait for picture and the percentage will increase and within a minute the picture will appear. Thenafter autoroll works fine.
MKM: Last 2-3 days I have sensed a little bit of slowness when changing channells and a greater likelyhood of "Bad or scrambled Channell" message. Just switch off and on at the back of the receiver.
same old keys should be working fine DN hasn't changed since 9:30 and BEV hasn't since 7 so it should be fine, the above keys posted by MINN are working...confirmed!!!!
Raghu - go to menu/installation/antenna/echo 7 and look at the right panel. You will see a panel with diseqc init. Go in there and connect to port 1, 2, 3 or 4, and note which one gives a good signal strength. Then select it, save and scan or blind scan
MKM: occasionally you get a key morphing where DN will twist one number (out of 16) in a a key. You may then have to put in the keys manually. For a starter, do a "set default key" and then keep the autoroll on, and let the autoroll work. If it does not, then set autoroll off and insert keys manually. then switch receiver off and on.
But if you download the latest bin onto your receiver you wouldn't even need the keymaster, it would just automatically download the keys directly on the receiver, which is really a relief from entering keys manually five times a day.
Nalin Lyda... I have tries to chek the Setdeafault keys.. but have not been able.. I was soooo tired and felt like fainting.. I left the Receiver OFF... then did my household.. WHEN I went back to Receiver AS Soon as I switch ON TV all WERE WORKING... Dont know whats wrong... Every channels workings... BUT BUT the frequence colour are RED. Usually they were GREEN with HIGH Level & Quality Percentage. WITH the REd Frequence All channels working... I am soo confused... I do things approximately...
keymaster is better then keyripper, most of the time keymaster have keys bf4 keyripper, its good to have both..unless u have something else which is better then these ones
MKM: Your surprising experience is not unique. Some of the autoload BINs take upto an hour to load. What I have found that, given false keys or old keys in both Key 00 and Key 01, sometimes the autoroll works better than when both keys were working and one key changes. The whole situation is a bit erratic and varies from BIN to BIN, and receiver to receiver. Make sure your date, clock and time zone are correctly set. EPG works better through 119W Happy viewing.
Hi Nalin, can u tell me where i can see india vs s.africa matches. I scan on nimiq, 8.1 & 3 echo but coulnd get. its on ESPN sports but i coulnd locate. ur help is appreciated. Thanks, Derry
The One, i need help plz. since last friday till today am adding the new nagra2 keys and still says bad or scrambled channel. i have the 2300a pansat. wats the problem?
What bin file are you uing? go to system info under menu and post exactly what it says there? but before doing that, turn your receiver off from the back switch and turn it back on after a minute and see if that helps. When was the last time your TV working?
