1. Home
    2. >
  2. Forum
    3. >
  3. Home Video Forum
    4. >
  4. Satellite TV Forum
    5. >
  5. Archived Satellite TV Threads Forum
    6. >
  6. Archive through November 02, 2007 Forum
    7. >
  7. New Keys Forum
    8. >

Archive through October 07, 2006

 

Bud
Bronze Member
Username: Bnc

Post Number: 21
Registered: Jun-06
Posted on   
If you enter the keys in your VS extreme and still not working, make sure you are entering them into Dish 01 01 00 NOT 00 01 00.
 

Ashfaq Tunio
New member
Username: Drtunio

Mississauga, Ontario Canada

Post Number: 3
Registered: May-06
Posted on   
These keys work for Pansat, but do not work for Ariza. Anyone have the keys for Ariza? Thanks.
 

Emil Yusupov
New member
Username: Yemil

Post Number: 4
Registered: Mar-05
Posted on   
I just purchased a SonicView vs-1000 installed the lastet o223 bin and did a sat scan. I get "scrambled channel" error.
Can someone tell me where to enter Nagra2 keys in this receiver?
 

The One
Silver Member
Username: Dude123

Post Number: 237
Registered: Jul-06
Posted on   
How is everyone doing with the new keys?????
I AM GOING TO SAY THIS ONE MORE TIME PEOPLE PAY ATTENTION!!!!!!

Keep your Keycode ON, Turn everything else OFF
put in the following keys in NAGRAVISION 2 and you are good to go! EVERYTHING SHOULD BE WORKING.... if for some reason some people still not getting channels that means you need n new bin

Nagra2 Keys
Updated: Friday, October 6 2006
Dishnet Keys, Provider 0101:

Key0: 0C FA 39 73 91 5F F5 54 E9 56 1C 42 8B 7A CA B2 (active)
Key1: 66 B9 F6 53 70 ED 2A 5B 31 D5 59 D2 9F 1C 52 63


Bev Keys, Provider 0901:

key0: 4F 11 A4 DB 3E 22 85 78 6D FC 54 38 A4 05 20 A9
Key1: 5B 14 37 7E 7A 73 3C 38 C0 68 D5 A9 57 C2 13 D5 (Active)
 

The One
Silver Member
Username: Dude123

Post Number: 238
Registered: Jul-06
Posted on   
Ashfaq Tunio

It doesn't matter if you have a pansat or ariza or viewsat... whatever you have got the keys aare the same for all the receivers...
but make sure you are inputing the right keys...
Dishnetwork uses different keys then BEV these two are services and not type of receivers
 

what boy
New member
Username: Whatboy

Post Number: 1
Registered: Oct-06
Posted on   
What about PANSAT 2700???

Nagra 2 has two sets of 8 two digits inputs, so what numbers go there???

the old ones were the

"4F 11...85 78"
"6D FC...20 A9"

What keys are the new ones???
 

what boy
New member
Username: Whatboy

Post Number: 2
Registered: Oct-06
Posted on   
The bin I have is 245... what number is the right one???
 

Emil Yusupov
New member
Username: Yemil

Post Number: 5
Registered: Mar-05
Posted on   
i have another pansat 3500 and there Nagra2 keys are in Menu > Parental Control > Second Pin > Nagra 2

In SonicView vs1000 there is no Second Pin or any other option related to Nagra

you know what i mean?
 

Monica
Bronze Member
Username: Ariana_70

Sorel-Tracy, Quebec Canada

Post Number: 76
Registered: Aug-06
Posted on   
Hi i just came back from vacation and they told me there is already a fix for Fortec ultra Lifetime can someone help me step by step on how to download the bins and what to do after i have never in my life done this , i know people here are saying we want everything spoon feed but is not that i read everything but still don't understand please someone with a helping hand ....help!
 

what boy
New member
Username: Whatboy

Post Number: 3
Registered: Oct-06
Posted on   
It ain't 245 it is 275, sorry.
 

lich tran
Bronze Member
Username: Lichmc

Post Number: 18
Registered: May-06
Posted on   
NEW KEYS 06 OCT 2006 04:50: pm


*** FOR PANSAT, MEGASATYT, FORTEC

1) Go to Parental Control, then go to Autoroll option at the bottom
2) Change Dishnest Autoroll to OFF,
3) Keep KeyCode on the first line ON
4) Exist to previous menu, then go to Nagravision 2
5) Change the new keys:

00==> 0C FA 39 73 91 5F F5 54 E9 56 1C 42 8B 7A CA B2
01==> 66 B9 F6 53 70 ED 2A 5B 31 D5 59 D2 9F 1C 52 63

remember you must have number 70 in the 01
66 B9 F6 53 70

You can download program "KeyRipper V2.0.zip" to get the new keys in software folders


*** FOR MEGASATPRO, COOsLSAT, COOLTECT

1) Press MENU, goto Autoroll Options in Installation

2) Change Echostar Autoroll to "DEACTIVE"

3) EXIST, then press 8282 for change keys menu

4) Make sure CAS is Nagravision, Ident is Dish network (0001)

5) Change the new keys

10==> 0C FA 39 73 91 5F F5 54
11==> E9 56 1C 42 8B 7A CA B2

20==> 66 B9 F6 53 70 ED 2A 5B
21==> 31 D5 59 D2 9F 1C 52 63

You can download program "KeyRipper V2.0.zip" to get the new keys in software folders
 

canon labtec
Bronze Member
Username: Fortec01

Post Number: 23
Registered: Sep-06
Posted on   
can any1 help me i having trouble getting channels they workd the past 3 weeks i have a fortec star jus today when i tured my receiver on itz waiting for picture after it finishes it it goes back to waiting for picture
 

sharnjit
Bronze Member
Username: Harjun

Post Number: 30
Registered: Sep-06
Posted on   
the new key is working in ariza 700 please tell me
 

Emil Yusupov
New member
Username: Yemil

Post Number: 6
Registered: Mar-05
Posted on   
Can someone tell me how to change keys in SonicView VS-1000.
I can't find that option under Parental COntrol as i have it in my Pansat.

I would appreciate any help on this.
 

KingFish
Silver Member
Username: Bones714

SO.California

Post Number: 102
Registered: Mar-05
Posted on   
Look at the home page, there's a post on How to change keys for Sonicview 1000.
 

KingFish
Silver Member
Username: Bones714

SO.California

Post Number: 103
Registered: Mar-05
Posted on   
If you can't find it, here it is again. Go to Menu, Scroll to Entertainment, Scroll down to Sokoban then enter 7890, it should display Code. You should be in the keys menu, then Enter the keys(00)Active for the 10-11 rows which are 0C FA 39 73 91 5F etc...
 

sharnjit
Bronze Member
Username: Harjun

Post Number: 31
Registered: Sep-06
Posted on   
the new key is not working on ariza 700 it still comes on screen scrambeled or bad channel
 

meri
Bronze Member
Username: M_khalifa4

Montreal, Qc Canada

Post Number: 21
Registered: May-06
Posted on   
pleasee guys ,
in 010100 i have 00 . 08 . 09 .88 .89
and in dish 00 01 00 i have 08,09,88,89
please can you explain more how to put the new keys on viewsat platinum ?
thank you
 

Armenian-Prince
New member
Username: Vedjourian

USA

Post Number: 10
Registered: Jul-06
Posted on   
Lich Tran Thank you It worked.
I really do appreciate it.
 

sharnjit
Bronze Member
Username: Harjun

Post Number: 32
Registered: Sep-06
Posted on   
sorry ariza 700 is not working with new key
 

sharnjit
Bronze Member
Username: Harjun

Post Number: 33
Registered: Sep-06
Posted on   
sorry ariza 700 is not working with new key
 

zarina shaukat
New member
Username: Mummsy

Scarborough, Ontario Canada

Post Number: 5
Registered: May-06
Posted on   
I just got a viewsat extreme.dont know how to put new keys can someone explain step by step how to do it.Am new at this.
Thanks
 

phil jaykobs
New member
Username: Philjay

Post Number: 1
Registered: Sep-06
Posted on   
hi, i just got a viewsat lite and i have no idea how to put in the new keys and where to find them, could someone please help me out?
Your help is greatly appreciated!
thank you
 

JASON MORE
New member
Username: Jasooon

Post Number: 5
Registered: Feb-06
Posted on   
HEY GUYS I HAVE A FORTEC BY 279T IT WAS WORKING NOW I TURN OFF BEW DN GLO BUT NOT KeyCode BUT ITS COUNTING NON STOP WAIT FOR PICTURE?
 

Byteme
Bronze Member
Username: Bytem3

Post Number: 21
Registered: May-06
Posted on   
thanks for the keys worked like a dream but why turn off the autoroll?
 

canon labtec
Bronze Member
Username: Fortec01

Post Number: 24
Registered: Sep-06
Posted on   
does any1 know how to hook a dvd/vcr combo to a fortec star i was planinin on recording a football game
 

zaza mala
Bronze Member
Username: Hicham

Post Number: 12
Registered: May-06
Posted on   
hi guys,
the BEV is down, plz plz help new keys?????
friday 00h40,
where are you the one, mc sunny
 

The One
Silver Member
Username: Dude123

Post Number: 239
Registered: Jul-06
Posted on   
zaza mala

These are the new keys:

Nagra2 Keys
Updated: Friday, October 6 2006
Dishnet Keys, Provider 0101:

Key0: 0C FA 39 73 91 5F F5 54 E9 56 1C 42 8B 7A CA B2 (active)
Key1: 66 B9 F6 53 70 ED 2A 5B 31 D5 59 D2 9F 1C 52 63


Bev Keys, Provider 0901:

key0: 4F 11 A4 DB 3E 22 85 78 6D FC 54 38 A4 05 20 A9
Key1: 5B 14 37 7E 7A 73 3C 38 C0 68 D5 A9 57 C2 13 D5 (Active)
 

zaza mala
Bronze Member
Username: Hicham

Post Number: 14
Registered: May-06
Posted on   
thankxxxxxxxxxxxxxxxxxxxxxx
the one
you are the best
all channels BEV are back
 

zaza mala
Bronze Member
Username: Hicham

Post Number: 15
Registered: May-06
Posted on   
Upload
 

Wonder
New member
Username: Wonderplanet

Post Number: 3
Registered: Jun-06
Posted on   
While trying to set my Pansat 2500A receiver, I pressed factory setting and now it is stuck on language selection screen and does not exit. Any suggestions?
 

Sam
Bronze Member
Username: Pathfinder191

Post Number: 79
Registered: Mar-06
Posted on   
Sharnjit,
Keep repeating same question does not help. All receivers that use DN have same key and all receivers using BEV use another set of key. If you have ariza, viewsat or whatever key remains the same for all. Isn't it a simple logic?
 

MINN ROCK
Silver Member
Username: Minn_rock

Post Number: 399
Registered: Aug-06
Posted on   
Wonder,press on language,go SAT SCAN,PRESS SCAN,and everything will come out for you...
 

shazil
New member
Username: Shazil

Post Number: 6
Registered: Mar-06
Posted on   
can someone tell me how to put keys in pansat 2700? actully i been trying for 3 hours but its not working..i don't what is 0101 or 00 and 01 thing..am confuse...please help me..THANKS
 

Spanishbabe
Bronze Member
Username: Spanishbabe

Post Number: 19
Registered: Jul-06
Posted on   
hi thank U all for the keys
now I have a Q. I need to know if the keys are only for local chanels or is hope for PPV
 

KingFish
Silver Member
Username: Bones714

SO.California

Post Number: 118
Registered: Mar-05
Posted on   
All channels Babe, even PPV
 

Spanishbabe
Bronze Member
Username: Spanishbabe

Post Number: 20
Registered: Jul-06
Posted on   
Thank's
KingFish
 

kiko
New member
Username: Kiko76

Vineland, New Jersey USA

Post Number: 2
Registered: Sep-06
Posted on   
ok guys i have a pantec ultra i bought, the person i got it from moved its been in my closet for a year all i have is the pantec box,when i joked up the box a black scrambled screen comes up what should i do.
 

wile coyote
Bronze Member
Username: Swirvin

Post Number: 14
Registered: Feb-05
Posted on   
what bin are you guys using to get these keys to work?
 

The One
Silver Member
Username: Dude123

Post Number: 240
Registered: Jul-06
Posted on   
well it depends what receiver you are using? Every receiver has its own bin file...what receiver do you have?
 

Luis Anthony
New member
Username: Luisanthony

Moca, P.R. P.R.

Post Number: 7
Registered: Sep-06
Posted on   
i have fortec ultra and those keys are not working for me i turned off dish autoroll but the keys still do not work what am i doing wrong dear friends? please help!!!
 

Luis Anthony
New member
Username: Luisanthony

Moca, P.R. P.R.

Post Number: 8
Registered: Sep-06
Posted on   
i have fortec star and those keys are not working for me i turned off dish autoroll but the keys still do not work what am i doing wrong dear friends? please help!!!
 

Spanishbabe
Bronze Member
Username: Spanishbabe

Post Number: 21
Registered: Jul-06
Posted on   
Help
My Echo 10 works fine but I cant see a single chanel from echo19 I have two LMB out in the dish one for each sat. but I only get to see the echo 10 local chanels from cleaveland or something like that. Help please some one I have also do a chanel search and nothing new.is that normal only the echo 10 works? what I have done different? Thank you for your help.
 

Luis Anthony
New member
Username: Luisanthony

Moca, P.R. P.R.

Post Number: 9
Registered: Sep-06
Posted on   
Fortec Star Dishnetwork Nagravision 2 Has Blacked Out again I can't see any channels please help!!

Thanks :-)
 

kiko
New member
Username: Kiko76

Vineland, New Jersey USA

Post Number: 3
Registered: Sep-06
Posted on   
whats the key's for fortec ultra
 

kiko
New member
Username: Kiko76

Vineland, New Jersey USA

Post Number: 4
Registered: Sep-06
Posted on   
pantec ultra sorry
 

Luis Anthony
New member
Username: Luisanthony

Moca, P.R. P.R.

Post Number: 10
Registered: Sep-06
Posted on   
Fortec Star Dishnetwork Nagravision 2 Has Blacked Out again I can't see any channels please help!!

Thanks :-)
 

Luis Anthony
Bronze Member
Username: Luisanthony

Moca, P.R. P.R.

Post Number: 11
Registered: Sep-06
Posted on   
It looks like everyone is watching Dish except me help!!!!!!!!!! :-(
 

wile coyote
Bronze Member
Username: Swirvin

Post Number: 18
Registered: Feb-05
Posted on   
someone, somewhere please help me.

i need to DOWNLOAD the latest gtrom loader for my pansat 2300a.

i cant find the actual FILE anywhere
 

Luis Anthony
Bronze Member
Username: Luisanthony

Moca, P.R. P.R.

Post Number: 12
Registered: Sep-06
Posted on   
ZzZzZzZzZzZzZzZz :-(
 

sam tab
New member
Username: Dnvrguy

Post Number: 6
Registered: Nov-05
Posted on   
luis anth did u turn autoroll off and change the key 56 by 70 ?
 

The One
Silver Member
Username: Dude123

Post Number: 241
Registered: Jul-06
Posted on   
Yeah Luis
All the channels are working fine.... make sure only keycode in ON turn everything else OFF and put in the following keys!!!

Dishnet Keys, Provider 0101:

Key0: 0C FA 39 73 91 5F F5 54 E9 56 1C 42 8B 7A CA B2 (active)
Key1: 66 B9 F6 53 70 ED 2A 5B 31 D5 59 D2 9F 1C 52 63


Bev Keys, Provider 0901:

key0: 4F 11 A4 DB 3E 22 85 78 6D FC 54 38 A4 05 20 A9
Key1: 5B 14 37 7E 7A 73 3C 38 C0 68 D5 A9 57 C2 13 D5 (Active)
 

Spanishbabe
Bronze Member
Username: Spanishbabe

Post Number: 22
Registered: Jul-06
Posted on   
can some one explain me why the keys only work on my Digiwave 7000 for local chanels and not in my Pantec Ultra it shows only the name of the show playing and goes up to 300% image and nothing also and have disable the auto scroll nothing help
no PPV chanels in the Digi only locals.


Please help I know the info is here some place but is so much imput that my head hurts mmmm.
Thank just in case
 

greg epperson
Bronze Member
Username: Nestea

Post Number: 45
Registered: Jul-06
Posted on   
Spanishbabe
You need to download the bin 279T or 280T and install it to your receiver. After downloading and installing, enter the new keys and you will get all channels working on your pantec utral.
 

Luis Anthony
Bronze Member
Username: Luisanthony

Moca, P.R. P.R.

Post Number: 13
Registered: Sep-06
Posted on   
I turn all the autorolls OFF except keycode that is ON still no channels please help guys!!
 

Luis Anthony
Bronze Member
Username: Luisanthony

Moca, P.R. P.R.

Post Number: 14
Registered: Sep-06
Posted on   
Did the Bin change since the last set of Keys on 9/15/06 for fortec star??
 

Makaveli
Bronze Member
Username: Mkvl1490

Post Number: 57
Registered: Feb-06
Posted on   
my sig is down. i put in the new keys and turned everything off. but its been raining a lot round here
 

Luis Anthony
Bronze Member
Username: Luisanthony

Moca, P.R. P.R.

Post Number: 15
Registered: Sep-06
Posted on   
Help!!!!!!!! :-(
 

D. Munoz
New member
Username: Diegox

Santo Domingo, D.N. Dominican Rep

Post Number: 3
Registered: Jul-06
Posted on   
Can somebody tell me how to fix this receiver?

It looks like a 2500 A clone, but it only run the 2300 A original file.Upload
 

Luis Anthony
Bronze Member
Username: Luisanthony

Moca, P.R. P.R.

Post Number: 16
Registered: Sep-06
Posted on   
I turn all the autorolls OFF except keycode that is ON still no channels please help guys!! :-(
 

Luis Anthony
Bronze Member
Username: Luisanthony

Moca, P.R. P.R.

Post Number: 17
Registered: Sep-06
Posted on   
zZzZzZzZzZzZzZzZz :-(
 

Johnner
Silver Member
Username: Johnner

Miami, Florida

Post Number: 757
Registered: Nov-05
Posted on   
Luis Anthony


Enter the keys again; one of them could be wrong it happens!

Nagra2 Keys
Updated: Friday, October 6 2006
Dishnet Keys, Provider 0101:

Key0: 0C FA 39 73 91 5F F5 54 E9 56 1C 42 8B 7A CA B2 (active)
Key1: 66 B9 F6 53 70 ED 2A 5B 31 D5 59 D2 9F 1C 52 63


Bev Keys, Provider 0901:

key0: 4F 11 A4 DB 3E 22 85 78 6D FC 54 38 A4 05 20 A9
Key1: 5B 14 37 7E 7A 73 3C 38 C0 68 D5 A9 57 C2 13 D5
(active)
 

Luis Anthony
Bronze Member
Username: Luisanthony

Moca, P.R. P.R.

Post Number: 18
Registered: Sep-06
Posted on   
Why can't I see any channels on my fortec star it only saids scramble or badchannel Help this is driving me crazy there is Boxing tonite;
Upload Help!!!!!!!!!
 

Luis Anthony
Bronze Member
Username: Luisanthony

Moca, P.R. P.R.

Post Number: 19
Registered: Sep-06
Posted on   
Johnner do I have to update my Bin??
 

The One
Silver Member
Username: Dude123

Post Number: 242
Registered: Jul-06
Posted on   
Luis Anthony
When was your receiver working last?
 

Luis Anthony
Bronze Member
Username: Luisanthony

Moca, P.R. P.R.

Post Number: 20
Registered: Sep-06
Posted on   
The One
it was working with the last keys on 9/15/06
 

The One
Silver Member
Username: Dude123

Post Number: 243
Registered: Jul-06
Posted on   
ok do you know which bin file you have downloaded onto your receiver
 

Luis Anthony
Bronze Member
Username: Luisanthony

Moca, P.R. P.R.

Post Number: 21
Registered: Sep-06
Posted on   
I really don't know how to download a bin file from my computer to the receiver yet, a friend use to do it for me he left to florida a month ago,I do have the cable that connects to my computer and the receiver,please show me how to do it good friend :-)
 

The One
Silver Member
Username: Dude123

Post Number: 244
Registered: Jul-06
Posted on   
it seems like you have the older bin file.... go to the following web site and update your bin then enter the new keys posted above and see if it works after... it should work after you update your bin file....

http://dsstester.*com/files.php?cat=16


don't forget to remove the *
 

The One
Silver Member
Username: Dude123

Post Number: 245
Registered: Jul-06
Posted on   
do you also have a loader to load the bin file
 

Luis Anthony
Bronze Member
Username: Luisanthony

Moca, P.R. P.R.

Post Number: 22
Registered: Sep-06
Posted on   
I have the cable that connects on the back of my PC that also connects to the receiver is that all I need?
 

vim
Bronze Member
Username: Dishoom

Scarborough, Ontario Canada

Post Number: 100
Registered: Jun-06
Posted on   
i need help i have fortec so which key i have to put and which autotoll i have to turned off pleaseeeeeeeeeeeeeeeee
 

The One
Silver Member
Username: Dude123

Post Number: 246
Registered: Jul-06
Posted on   
that and you also need another software to load the bin file onto your receiver
 

serguei s
New member
Username: Dambpot

Post Number: 4
Registered: Jun-06
Posted on   
Please help...
I' m confused I loaded active new keys..at 00 N2,do I have to loaded in old keys at 01 as well..?at my Pansat clone 2500. I turned DN autoroll off,clicked Defolted key before,but still nothing and when i checing keys ..not what i put in..I have 279T bin it was good for awile few days ago
 

The One
Silver Member
Username: Dude123

Post Number: 247
Registered: Jul-06
Posted on   
vim how old is your bin file?
 

Luis Anthony
Bronze Member
Username: Luisanthony

Moca, P.R. P.R.

Post Number: 24
Registered: Sep-06
Posted on   
Please tell me where to get that software!
 

The One
Silver Member
Username: Dude123

Post Number: 248
Registered: Jul-06
Posted on   
serguei s
All the channels are working fine.... make sure only keycode in ON turn everything else OFF and put in the following keys!!!

Dishnet Keys, Provider 0101:

Key0: 0C FA 39 73 91 5F F5 54 E9 56 1C 42 8B 7A CA B2 (active)
Key1: 66 B9 F6 53 70 ED 2A 5B 31 D5 59 D2 9F 1C 52 63


Bev Keys, Provider 0901:

key0: 4F 11 A4 DB 3E 22 85 78 6D FC 54 38 A4 05 20 A9
Key1: 5B 14 37 7E 7A 73 3C 38 C0 68 D5 A9 57 C2 13 D5 (Active)
 

Luis Anthony
Bronze Member
Username: Luisanthony

Moca, P.R. P.R.

Post Number: 25
Registered: Sep-06
Posted on   
Where can I get the software to load the bin file onto my receiver??
 

The One
Silver Member
Username: Dude123

Post Number: 249
Registered: Jul-06
Posted on   
ok vim and Luis Anthony

both of you go to dsstester.*com
download the loader (software to load the bin file) also download the latest bin file from http://dsstester.*com/files.php?cat=16
connect your receiver to your pc load the bin file into your receiver and then turn the keycode on only and put in the new keys manually

after you do all that it should work
Good Luck!!!!
 

Luis Anthony
Bronze Member
Username: Luisanthony

Moca, P.R. P.R.

Post Number: 26
Registered: Sep-06
Posted on   
Thank you The One I will try that take care.
 

vim
Silver Member
Username: Dishoom

Scarborough, Ontario Canada

Post Number: 101
Registered: Jun-06
Posted on   
i just need the keys
 

The One
Silver Member
Username: Dude123

Post Number: 250
Registered: Jul-06
Posted on   
VIM
These are the new keys:

Nagra2 Keys
Updated: Friday, October 6 2006
Dishnet Keys, Provider 0101:

Key0: 0C FA 39 73 91 5F F5 54 E9 56 1C 42 8B 7A CA B2 (active)
Key1: 66 B9 F6 53 70 ED 2A 5B 31 D5 59 D2 9F 1C 52 63


Bev Keys, Provider 0901:

key0: 4F 11 A4 DB 3E 22 85 78 6D FC 54 38 A4 05 20 A9
Key1: 5B 14 37 7E 7A 73 3C 38 C0 68 D5 A9 57 C2 13 D5 (Active)
 

vim
Silver Member
Username: Dishoom

Scarborough, Ontario Canada

Post Number: 102
Registered: Jun-06
Posted on   
i need the keys for my fortec latest keys
 

joe vujevich
New member
Username: Somborac1954

Post Number: 1
Registered: Sep-06
Posted on   
Any news for Pansat 2500A, And how to? I'm new here. Thank you
 

vim
Silver Member
Username: Dishoom

Scarborough, Ontario Canada

Post Number: 103
Registered: Jun-06
Posted on   
sorry to ask you please tell me if the keys same for fortecstar , pansat because i have two receiveer i type this for my pansat it works so you think same for this my FORTEC too
 

sharnjit
Bronze Member
Username: Harjun

Post Number: 34
Registered: Sep-06
Posted on   
i was tying 4hours but new key is not working in ariza 700 please help me and in my receiver does not working second pin with code 0000.please
 

vim
Silver Member
Username: Dishoom

Scarborough, Ontario Canada

Post Number: 104
Registered: Jun-06
Posted on   
sorry to ask you please tell me if the keys same for fortecstar , pansat because i have two receiveer i type this for my pansat it works so you think same for this my FORTEC too
 

The One
Silver Member
Username: Dude123

Post Number: 251
Registered: Jul-06
Posted on   
keys are the same for all receivers
but make sure if your are using Dishnetwork services use Dishnetwork keys...and if you are using BEV then use BEV keys but both sets of keys are same for all the receivers
good luck
 

Luis Anthony
Bronze Member
Username: Luisanthony

Moca, P.R. P.R.

Post Number: 27
Registered: Sep-06
Posted on   
The One
Please tell me what Loader is the Best for installing the bin to Fortec Star?
 

r1010
Bronze Member
Username: R1010

Canada

Post Number: 48
Registered: May-06
Posted on   
thankx soo much all o f
 

Johnner
Silver Member
Username: Johnner

Miami, Florida

Post Number: 765
Registered: Nov-05
Posted on   
bump!
Nagra2 Keys
Updated: Friday, October 6 2006
Dishnet Keys, Provider 0101:

Key0: 0C FA 39 73 91 5F F5 54 E9 56 1C 42 8B 7A CA B2 (active)
Key1: 66 B9 F6 53 70 ED 2A 5B 31 D5 59 D2 9F 1C 52 63


Bev Keys, Provider 0901:

key0: 4F 11 A4 DB 3E 22 85 78 6D FC 54 38 A4 05 20 A9
Key1: 5B 14 37 7E 7A 73 3C 38 C0 68 D5 A9 57 C2 13 D5
(active)
 

Luis Anthony
Bronze Member
Username: Luisanthony

Moca, P.R. P.R.

Post Number: 28
Registered: Sep-06
Posted on   
Please tell me what Loader is the Best for installing the bin to Fortec Star?
 

Johnner
Silver Member
Username: Johnner

Miami, Florida

Post Number: 769
Registered: Nov-05
Posted on   
Luis Anthony


http://www.dsscentral.net/files/uploads/FortecLoader%20v3.1A.zip
 

Luis Anthony
Bronze Member
Username: Luisanthony

Moca, P.R. P.R.

Post Number: 29
Registered: Sep-06
Posted on   
Thanks Johnner take care :-)
 

Johnner
Silver Member
Username: Johnner

Miami, Florida

Post Number: 771
Registered: Nov-05
Posted on   
bump!
Nagra2 Keys
Updated: Friday, October 6 2006
Dishnet Keys, Provider 0101:

Key0: 0C FA 39 73 91 5F F5 54 E9 56 1C 42 8B 7A CA B2 (active)
Key1: 66 B9 F6 53 70 ED 2A 5B 31 D5 59 D2 9F 1C 52 63


Bev Keys, Provider 0901:

key0: 4F 11 A4 DB 3E 22 85 78 6D FC 54 38 A4 05 20 A9
Key1: 5B 14 37 7E 7A 73 3C 38 C0 68 D5 A9 57 C2 13 D5
(active)
 

Luis Anthony
Bronze Member
Username: Luisanthony

Moca, P.R. P.R.

Post Number: 30
Registered: Sep-06
Posted on   
Johnner I got the Loader you told me,please tell me the lastest bin for fortec and how to load it to the loader please help thanks!!
 

Luis Anthony
Bronze Member
Username: Luisanthony

Moca, P.R. P.R.

Post Number: 31
Registered: Sep-06
Posted on   
I got the Loader,please tell me the lastest bin for fortec and how to load it to the loader please help thanks!!
 

Luis Anthony
Bronze Member
Username: Luisanthony

Moca, P.R. P.R.

Post Number: 32
Registered: Sep-06
Posted on   
I need the NEW bin for Fortec Star please help!!
 

sharnjit
Bronze Member
Username: Harjun

Post Number: 35
Registered: Sep-06
Posted on   
ANYBODY HELP ME WITH ARIZA 700 NEW BIN DOWNLOAD
I PUT SERIAL PORT COM1,BAUD RATE 115200,STD MODEL ARIZA 700,AND UNZIPPED NEW BIN BUT THE COMPUTER SAID THIS IS NOT WRITE STB MODEL PLEASE TELL ME BUT IS THE STB MODEL FOR ARIZA 700
 

john 24
New member
Username: Lakers123

Post Number: 6
Registered: Jun-06
Posted on   
I would like to thank everyone who posts info on this site it is very helpfull im watchin tv. but i have a question has it always been like this that we have to change the nagra 2 code every other day or has there been times where its lasted longer. i have a pansat 3500 if that matters if not its still fine atleast im watchin tv.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us