Archive through September 05, 2006

 

Bronze Member
Username: Albino_midget

Post Number: 85
Registered: Jul-06
do everybody a favor
search your problem at hashhu dot com
 

New member
Username: Freeload

Post Number: 8
Registered: May-06
thank you
 

Silver Member
Username: Nydas

Post Number: 326
Registered: Jun-06
Currently if you have a Viewsat the BIN is dated around 14th August. For Sonicview, the BIN is dated 19th August.
DN ID is 0101. BEV ID is 0901. Globecast ID is C101
This is all Nigravision 2. Forget Nagra 1 '" it is not needed now.
If you put in the latest Keys correctly, you should get most channels.
The Keys posted above have 16 two digit numbers in Line 00. This goes into 08 and 09 (half and half). The 16 two digit numbers listed above for Line 01, go into 88 and 89.
 

Silver Member
Username: Nydas

Post Number: 327
Registered: Jun-06
IF YOU DO NOT HAVE VIEWSAT OR SONICVIEW.

For all the rest, you SHOULD make sure that the BIN you have is a BIN dated around the 10th of June, usually not earlier than 7th June and not later than 21st June for most receivers. You should point your dish to the satellite you want to scan, and then do a BLIND scan.
You will NOT get PPV, International, VOD and Adult channels. You will get some channells usually beginning with a "W" and this will give you ABC, NBC, PBS, Fox, Link TV, and couple of channels with "K". You will also get some religious channels.
You will need to put in the current Keys for the Network you have chosen. These Keys are posted above.
Till we get a NEW BIN, that is all you can expect, so please do not keep on asking what to do or asking for new Keys. The Keys are the SAME for all dishes.
For C**sat, it will be lines 10 and 11, and 20 and 21 - see my post above.

THERE ARE NO NEW BINS OUT FOR PANSAT AND C**LSAT AND MOST OTHERS.
 

Silver Member
Username: Nydas

Post Number: 328
Registered: Jun-06
Loc Noir : Your problem regarding the DN superdish was discussed at length on another thread.
https://www.ecoustics.com/electronics/forum/home-video/256331.html
Start with Harry Carnet's post of 15th August, follow through with LK's and my answers.
The gist is that there is power supply problem to your switch. You will need to read quite a bit, so you grasp it all.
 

Bronze Member
Username: Yo8bps

Post Number: 83
Registered: Jun-06
I think this thread is too big , and we should try to RESTART fresh ! What is your oppinion ??
:-) :-) No ofence to anyone ! :-)
 

New member
Username: Locnoir

Post Number: 4
Registered: Aug-06
Thanks Nalin Nyda! What I have is a DN's superdisk on roof with 3 cables connected to a DP-34 switch. According to the diagram from TheBinChiCODE, I have to connect a DN receiver to port 1 to power the DP-34. I thought I could connect the Pansat 2500A directly to port 1 !!!
 

Silver Member
Username: Nydas

Post Number: 329
Registered: Jun-06
Loc Noir: Not only will you have to put your old receiver on Port 1, but keep it on just to power DP-34. You might as well buy a separate power supply for your DP34, as suggested for DP-34A
 

New member
Username: Malcom604

Post Number: 9
Registered: Aug-06
Satellite Encryption Keys
Bell ExpressVu (Last Update: 2006/25/08 7:27 EST)
Key 0: 0A D3 27 F7 FA 4B FA 7C 63 78 4D 73 AB 92 37 60
Key 1: C6 CA E9 B3 64 4E 5B A6 63 D1 28 D7 5E 7E 4B B8 Active
Echostar DishNetwork (Last Update: 2006/18/08 1:34 EST)
Key 0: 84 4E 77 C8 56 91 5F BC 08 DE 10 D6 D2 91 7E F7
Key 1: 98 F5 81 B3 1E 96 00 3C 67 59 AE 1E D5 2E 1F D2 Active


latest working keys
 

Bronze Member
Username: Vasia22

Post Number: 36
Registered: Jun-06
are this keys only work with card recievers? I got colsat 6000
 

New member
Username: 18_volts_baby

Post Number: 4
Registered: Aug-06
Great New Web Forum
Completely Free Membership
New ECM Working Bins for top receivers
LIVE CHAT FOR QUICK KEYS
LOG ON AND REGISTER NOW!

http://electronicguru.net/

WATCH TV TONIGHT
 

New member
Username: Matthew00

Post Number: 2
Registered: Aug-06
I don't get it, I kept seeing 32 digits for 00 and 32 digits for 01. my Pansat 3500 only allow me to put 16 digits for 00 and 16 digits for 01 so what am I missing here.

Please help,

thanks guys,
 

Silver Member
Username: Hardrockstriker

Post Number: 469
Registered: Apr-06
Are two rows displayed from each key? If not, re-install your bin. If so, then use your down-arrow key to move to second row.
 

New member
Username: 18_volts_baby

Post Number: 6
Registered: Aug-06
New Web Forum
Completely Free Membership

LIVE CHAT FOR QUICK KEYS
LOG ON AND REGISTER NOW!


Friendly and easy going staff

Newbies always welcomed and wanted

FTA and Computer Security related
Forums

Come join the fun

http://electronicguru.net/
 

Gold Member
Username: Lklives

Post Number: 4102
Registered: Jan-06
Another money hungry LEECH site appears!...spamming here...trying to get the last dollar out of everybody's pockets!....probably thru their sponsors selling U clones of clones and garbage..
 

Bronze Member
Username: Ice_cold_killa

Toronto, ON Canada

Post Number: 11
Registered: Jun-06
hii...i didnt have any local channels in my receiver....only the channles i catch are the american channels through dish net and they are also down....but sum1 told me that u can also get local channels in ur receiver....can anybody tell me how to get local channels..
 

Silver Member
Username: Jmill1948

Chester, Va Usa

Post Number: 945
Registered: Apr-04
98 F5 81 B3 1E 96 00 3C 67 59 AE 1E D5 2E 1F D2 key 01 active

84 4E 77 C8 56 91 5F BC 08 DE 10 D6 D2 91 7E F7 key 00

no web site but good info
 

New member
Username: 18_volts_baby

Post Number: 7
Registered: Aug-06
LK

No one is asking for a cent and it's run free of manufacturers control so keep you comments to urself unless u have facts right!
 

Bronze Member
Username: Mexico

Post Number: 16
Registered: Aug-06
DOES ANYONE HAVE THE NEW KEYS?
 

Silver Member
Username: Minn_rock

Post Number: 121
Registered: Aug-06
the keys is right infront of u by james millard.that is a working keys...
 

Silver Member
Username: Jmill1948

Chester, Va Usa

Post Number: 972
Registered: Apr-04
they work for the locals on dn
 

Silver Member
Username: Nydas

Post Number: 336
Registered: Jun-06
john do : Can you post the BIN date? At
ID 0101
Key 00
You should see two rows of eight two digit numbers. If you are not seeing that you need to reinstall the BIN.
Key 01
Again you should see two rows as stated above.
 

Silver Member
Username: Jmill1948

Chester, Va Usa

Post Number: 996
Registered: Apr-04
you ar in n2 correct
 

Bronze Member
Username: El_chido

Post Number: 21
Registered: Aug-06
WHAT DO YOU THINK ABOUT VIEWSAT VS2000 EXTREME
 

New member
Username: Matthew00

Post Number: 3
Registered: Aug-06
thanks All,

my bin dated 6/16/06. If this is an old bin, please let me know where I can get the new bin. I have the system and can't get it to work.

thanks again
 

Silver Member
Username: Minn_rock

Post Number: 127
Registered: Aug-06
john go here http://www.dssrookie*com/forums/change the star to a dot...everything you need.....
 

Silver Member
Username: Minn_rock

Post Number: 128
Registered: Aug-06
your bin 6-16-06 do have 32 digit in keys 00,and 32 digit in keys 01.that is a new bin,are u sure u looking at NAG 2 ????and remember it only locals u can get....
 

Silver Member
Username: Nydas

Post Number: 340
Registered: Jun-06
john do :I think you are looking at Nagravsion 1. Nagravision 1 is obsolete. If you go to Nagravision 2 you should see two rows for Key 00 and two rows for Key 01. If not, you need to reload the BIN.
 

New member
Username: Matthew00

Post Number: 4
Registered: Aug-06
thanks everyone, I have been using Nav1. Any way, I got 32 digits on Nav2 now but, it still doesn't work so I am thinking to reload the bin.

where can I get the new bin?

thanks,
 

New member
Username: Matthew00

Post Number: 6
Registered: Aug-06
thanks everyone, I have been using Nav1. Any way, I got 32 digits on Nav2 now but, it still doesn't work so I am thinking to reload the bin.

where can I get the new bin?

thanks,
 

New member
Username: Matthew00

Post Number: 7
Registered: Aug-06
now, I screw up, I used factory setting and eveyrthing is wiped out which included my parent control option is grey out.

could someone please let me know how to reset (load) everything from scratch included to load the new bin
 

Silver Member
Username: Nydas

Post Number: 342
Registered: Jun-06
John do: Before you do anything else, just reload the Nagravsion 2 keys, than do a blind scan. After that look for channels you know should be available, (many of the channels starting with W, and FPCHN
 

New member
Username: Matthew00

Post Number: 8
Registered: Aug-06
could you please give me the full details of how to do it? I am immature on this stuff and many thanks to all of your help.
 

New member
Username: Malcom604

Post Number: 10
Registered: Aug-06
Bev Keys Updated: 2006-08-27 11:00:00Key 00: CABDB9018E62150BAD5ACE9F340ED3ADKey 01: 76384B7BE6B630C955762A57F4ED98190 new keys updated today
 

Silver Member
Username: Nydas

Post Number: 346
Registered: Jun-06
John do: You already know how to enter Nagravision 2 keys. After doing that make sure you keep the autoroll on.
Then use Menu/Installation/blind scan. You know which satellite you are pointing to. You can do a blind scan on all that are showing on the menu on the right, but one at a time
 

Bronze Member
Username: Atok

Post Number: 20
Registered: Jun-06
Hi Guys,

one silly question, Is the locals still working on Fortec
 

Silver Member
Username: Nydas

Post Number: 355
Registered: Jun-06
"one silly question, Is the locals still working on Fortec"
YES
 

Bronze Member
Username: Atok

Post Number: 21
Registered: Jun-06
Thank you Nalin Nyda,

I did upload the last known good bin file of late june. But I am not able to get locals. Can you help me where to look for more info for setting up.
Thanks
 

Silver Member
Username: Nydas

Post Number: 357
Registered: Jun-06
I am presuming you are scanning either 110W or 119W.
You should do a blind scan. If you do not have blind scan, you should do scan all. The channels you are looking for are mostly ones with "W' something, e.g
7640 WXXI Echo 8.1(110W) TP 12603 (V) PBS
7822 WNWO Echo 8.1(110W) TP 12588 (H) NBC
8133 WPGH Echo 8.1(110W) TP 12631 (V) Fox
573 FPCHN Echo 3 (61.5W) TP 12383 (H) ATV Bangla
and many more. The following URL has an exhaustive list '" scroll down to see the list.

http://ekb.dbstalk.com/dishlist.htm
 

Bronze Member
Username: Atok

Post Number: 22
Registered: Jun-06
Hey Nalin, Still locals not working for me. I think its right time for me to get a Viewsat, Just want to know what you think, I am not gonna hold you for your view. Free TV's come with a price and I am willingto take chance with Viewsat or any working FTA box.
Thanks-ATOK
 

New member
Username: Ctaylor

Post Number: 1
Registered: May-06
The new keys has 2 many digits in 01
it has 33 instead of 32
could someone explain
 

Silver Member
Username: Minn_rock

Post Number: 144
Registered: Aug-06
no they are not or maybe u miss count it..32 digit only......
 

Bronze Member
Username: Dude123

Post Number: 70
Registered: Jul-06
did these guys change the keys yesterday again?
can someone post the latest keys for the locals atleast?
thanx in advance
 

Bronze Member
Username: Baluja

Post Number: 59
Registered: Jun-06
what are the new keys for BEV as of Aug 29 3:00 pm EST. Is autoroll working for new keys on Koolsat 5k with 102 ROM card ?
 

New member
Username: Ctaylor

Post Number: 2
Registered: May-06
I have counted O1 of your post 10 times & I still
count 33 digits.I have keyed them in except for the 33 # which is 0 & it does not work. To cofirm
that I am seeing it properly here is a copy
Bev Keys Updated: 2006-08-27 11:00:00Key 00: CABDB9018E62150BAD5ACE9F340ED3ADKey 01: 76384B7BE6B630C955762A57F4ED98190 new keys updated today
 

Silver Member
Username: Nydas

Post Number: 360
Registered: Jun-06
DN is unchanged:
N 0101 00:
84 4E 77 C8 56 91 5F BC...08 DE 10 D6 D2 91 7E F7

N 0101 01: (Active)
98 F5 81 B3 1E 96 00 3C...67 59 AE 1E D5 2E 1F D2

BEV
Key (00) BEV idea key 86:
CA BD B9 01 8E 62 15 0B...AD 5A CE 9F 34 0E D3 AD

Key (01) BEV idea key 96:
76 38 4B 7B E6 B6 30 C9...55 76 2A 57 F4 ED 98 19
 

Bronze Member
Username: Dude123

Post Number: 71
Registered: Jul-06
hey Nalin these keys are not working for some reason... i think they changed it again yesterday
 

Bronze Member
Username: Dude123

Post Number: 72
Registered: Jul-06
TO Nalin again, please disregard the post i posted above this one.... yesterday while i was watching tv suddenly it went away and said no signal so i thought that they might have changed the keys but today i just turned my receiver off and then turned it back on and it works so... ya sorry for that...
 

Bronze Member
Username: Dude123

Post Number: 73
Registered: Jul-06
Nalin,
Also do you have any latest for pansat bin?
 

Bronze Member
Username: Dude123

Post Number: 74
Registered: Jul-06
i meant latest news for pansat bin?
 

Silver Member
Username: Nydas

Post Number: 361
Registered: Jun-06
All quiet on the Pansat front. BL haters are dishing out verbal hell and the BL worshippers are still worshiping and praying. I think that when it comes it will be stronger than Viewsat's, especailly for the slower processesors.
 

Bronze Member
Username: Latino24

Post Number: 13
Registered: Mar-06
Hello everyone,
Can anyone tell me which local chanels are working for BEV Sat 91.0 - I'm using a pansat 3500 and I only find some chanels sound only but no picture, got the lastest bin. (I know not all chanels are open, still waiting for new bin)
 

Silver Member
Username: Morispastora

Thunder bay, Ontario Canada

Post Number: 166
Registered: Aug-06
NOTHING THERE JUST INFO CHANNALES.
 

Silver Member
Username: Nydas

Post Number: 365
Registered: Jun-06
DN Keys (unchanged):
N 0101 00:
84 4E 77 C8 56 91 5F BC'08 DE 10 D6 D2 91 7E F7

N 0101 01: (Active)
98 F5 81 B3 1E 96 00 3C'67 59 AE 1E D5 2E 1F D2

BEV Keys changed
Key (00) BEV idea key 86:
60 8E E3 69 62 EA BD 1B'0B 1A CF 6C DA AE 3A 16

Key (01) BEV idea key 96:
76 38 4B 7B E6 B6 30 C9'55 76 2A 57 F4 ED 98 19
 

Bronze Member
Username: Bnc

Post Number: 18
Registered: Jun-06
Dish Network:
KEY00: 29 76 E7 8D E3 C5 EB 47
BE D0 2A 9E 1D 9D BC 22(Active)
KEY01: 98 F5 81 B3 1E 96 00 3C
67 59 AE 1E D5 2E 1F D2
 

New member
Username: Tabbas

Post Number: 9
Registered: Jul-06
guys,which keys working for Fortec, and if not, can some body teach me how to get new bin and download them.. thanks
 

New member
Username: Bra69

Post Number: 1
Registered: Aug-06
Hi I have pansat 2500 please can anyone explain to me how to enter code
thanks
 

Gold Member
Username: Lklives

Post Number: 4149
Registered: Jan-06
Fortec is a dead horse, except for some spotbeamed locals with the last DN keys posted above from Bud..
 

Silver Member
Username: Nydas

Post Number: 367
Registered: Jun-06
Menu/Parental control
Down to second pin. enter 0 0 0 0 (unles you have changed the security code).
go to Nagravision 2 - OK.
Provider ID: 01 01 for DN.
Key 00
Enter two sets of 8, 2 digit numbers - see above keys posted by Bud.
Go up to Keys and change it to 01
Come down and enter 8, 2 digit numbers.
Press OK to save. You will see the OK sign flashing.
If you want to enter BEV keys change the ID to 09 01 and do the same as above.
Press exit. go to Autoroll and change it to ON and Keys to ON.
Exit Exit Exit.
Keys are the same for all receivers. For Viewsat you should have the 14th August BIN. You should get all channels.
For others you should have BIN dated 7th June to 18th June. You will get about 30-40 channels, mostly starting with W. You will be able to see NBC, ABC,FOX, PBS, FPCHN, LinkTV, and a few others.

Please don't ask for new BIN. It will be posted here when it comes. New keys are also posted here as frequently as they change.
DON'T ASK. INSTEAD GO INTO DIFFERENT THREADS AND READ.
 

Bronze Member
Username: Mattlayne

Post Number: 15
Registered: Jun-06
is there anything new for the coosat 5000 yet...bin, keys, or anything. someone plese help
 

New member
Username: Silverfox62

Kentucky

Post Number: 5
Registered: Aug-06
anyone have the new keys?
 

Bronze Member
Username: Bsl073

Post Number: 17
Registered: Jul-06
I have had no prob getting locals with the keys till now. I get my own keys with keymaster and add them myself. With these new keys I am getting a "wait for pic" countup. Are the new keys already useless or is this a new problem. I have a Lifetime Ultra.
 

New member
Username: Dimwitt

Post Number: 4
Registered: Aug-06
as always, triple check your keys
 

Bronze Member
Username: Bsl073

Post Number: 18
Registered: Jul-06
Double checked when I should of triple checked. Thanks bridgeburner, got it now
 

New member
Username: Dimwitt

Post Number: 5
Registered: Aug-06
keys work 4 everone but you
you tell me
 

New member
Username: Stormintv

Sudsbury, ON

Post Number: 4
Registered: Jul-06
how come these keys have 32 per bank 00 and 01 ?
usually 16 nespa.
help
 

New member
Username: Vazman4u

Post Number: 5
Registered: Jun-06
I have these keys:
Dish Network:
KEY00: 29 76 E7 8D E3 C5 EB 47
BE D0 2A 9E 1D 9D BC 22(Active)
KEY01: 98 F5 81 B3 1E 96 00 3C
67 59 AE 1E D5 2E 1F D2

and this bin...
X-87BL_060609_272_api_2.bin

I still can't see any channels. Can someone help?
 

New member
Username: Vazman4u

Post Number: 6
Registered: Jun-06
Sorry...
I have a pansat 2700A
 

Bronze Member
Username: Jowhar

Post Number: 36
Registered: Jun-06
posted by Nalin Nyda

Menu/Parental control
Down to second pin. enter 0 0 0 0 (unles you have changed the security code).
go to Nagravision 2 - OK.
Provider ID: 01 01 for DN.
Key 00
Enter two sets of 8, 2 digit numbers - see above keys posted by Bud.
Go up to Keys and change it to 01
Come down and enter 8, 2 digit numbers.
Press OK to save. You will see the OK sign flashing.
If you want to enter BEV keys change the ID to 09 01 and do the same as above.
Press exit. go to Autoroll and change it to ON and Keys to ON.
Exit Exit Exit.
Keys are the same for all receivers. For Viewsat you should have the 14th August BIN. You should get all channels.
For others you should have BIN dated 7th June to 18th June. You will get about 30-40 channels, mostly starting with W. You will be able to see NBC, ABC,FOX, PBS, FPCHN, LinkTV, and a few others.

Please don't ask for new BIN. It will be posted here when it comes. New keys are also posted here as frequently as they change.
DON'T ASK. INSTEAD GO INTO DIFFERENT THREADS AND READ.
 

Silver Member
Username: Nydas

Post Number: 371
Registered: Jun-06
Joe Vazman : You have the correct BIN. Recheck the date as either 9th or 10th June.
If still not working triple ckeck the Keys.
Turn the receiver off (using switch on receiver) and on after 15 secodes.
If still no good, do a BLIND scan. You should get the few channels I stated in my post earlier.
 

New member
Username: Hattras1

Fort lauderdale, Fl Usa

Post Number: 8
Registered: May-06
Which bin should we be using. I have 85bl or 87bl and is it working? thanks
 

Bronze Member
Username: Mattlayne

Post Number: 17
Registered: Jun-06
Does any one have any new keys for co*lsat5000
 

New member
Username: Auditz

Post Number: 10
Registered: Aug-06
stormin!
Scroll up and read..other people had that same question before you.

Bud keys work beter than Nalin's but still no premium on E*7 (119)
Thats the key i need.
I wish someone would teache us how to get the keys ourselves... :~D
 

Silver Member
Username: Nydas

Post Number: 376
Registered: Jun-06
The keys I posted for DN are dated Wednesday, 30th August. Bud quite rightly posted on Thursday, the new Keys changed after my post. Neither Bud nor I invent the Keys. We bring them to you when there is a change.
 

Bronze Member
Username: Auditz

Post Number: 11
Registered: Aug-06
its cool Nyda, we (the newbies and not so newbies) still got love for you
 

Bronze Member
Username: Brucester

Post Number: 11
Registered: Jul-06
i have a lave3200 june 10 bin im trying to get bev i get sound on some but no pitcher i think im not puting the keys in right when i go to nagra2 i only have room for one set of 8 do i save that set or do i put them on top of the other ones or in one of the other three boxis please if some one can help and thanks
 

Bronze Member
Username: Brucester

Post Number: 12
Registered: Jul-06
sorry i have 16 a enough for one set what do i do with the other set
 

Silver Member
Username: Nydas

Post Number: 377
Registered: Jun-06
bruce lagasse :
https://www.ecoustics.com/electronics/forum/home-video/259083.html#POST837514
 

Bronze Member
Username: Brucester

Post Number: 13
Registered: Jul-06
i read that it does not tell me what to do with the second set do i save the first set or do i change it to 01 put the second set on top of the first set or turn the page and put the second set there i see four different places i could put them only one sattlite dishnet and three others that say nothing the last one full of f s explain to me please tell me if thay go in one set thank you my dish is pointing at 91 is not working right now but it would be nice to know for the future thank you
 

Silver Member
Username: Nydas

Post Number: 379
Registered: Jun-06
You enter ALL of the following under Nigravision 2 ID 01 01 for Dishnet. Use latest Keys posted.
"Key 00
Enter two sets of 8, 2 digit numbers - see above keys posted by Bud.
Go up to Keys and change it to 01
Come down and enter 8, 2 digit numbers.
Press OK to save. You will see the OK sign flashing."

You then (if you want to) change ID to 09 01 (for BEV)
and REPEAT THE WHOLE PROCESS with BEV keys.
 

Silver Member
Username: Albino_midget

Post Number: 135
Registered: Jul-06
knock it off, i thought that link was for me, andi get a grip
 

Silver Member
Username: Nydas

Post Number: 382
Registered: Jun-06
KrAcK-piPe is a crazy guy, planting a virus.
DO NOT follow his link.
 

New member
Username: Joecreosta

Post Number: 5
Registered: Jun-06
Following keys are NOT working with my ARIZA 700
dish net
key00:29 76 E7 8D E3 C5 EB 47 BE DO 2A 9E 1D 9D BC 22 (active)
key01:98 F5 81 B3 1E 96 00 3C 67 59 AE 1E D5 2E 1F D2

CAN SOMEONE PLEASE HELP ME.....
 

Silver Member
Username: Nydas

Post Number: 383
Registered: Jun-06
Joe Yousif:
1. Manually switch off at the back of receiver and after 30 secods switch on.
2. Make sure autoroll is on.
3. Recheck and confrim to us the date and model number of your BIN. It must be between 7th June and 18th June 2006 to work.
4. What satellite are you pointing to, and the signal levels? Do a "blind scan" of the satellite if available on your Ariza.

When did you last have any channels and what channels were you getting? Currenly you should get MANY channels beginning with "W", some with a "K", FPCHN, LINKTV, FNC. Thus you should be able to see NBC, ABC, Fox, PBS.
 

New member
Username: Joecreosta

Post Number: 6
Registered: Jun-06
Nalin, I have the following bin file....
AA-1_H20060610_277eEU(N)_bgmain_700.zip
which was June 10 2006. i do not know alot about these things. but i only have one dish which points to get all the arabic channels, and I see some indian channels too....i have tried all the above you metnioned...but still no goo :-( help me brother
 

Bronze Member
Username: Malcom604

Post Number: 12
Registered: Aug-06
Satellite Encryption Keys
Bell ExpressVu (Last Update: 2006/30/8/14:07 EST)
Key 0: 60 8E E3 69 62 EA BD 1B 0B 1A CF 6C DA AE 3A 16
Key 1: 3A BA CD 06 03 CE 6D 97 EC FB 9E 68 D4 5E 21 C6 Active
Echostar DishNetwork (Last Update: 2006/31/08 4:20 EST)
Key 0: 29 76 E7 8D E3 C5 EB 47 BE D0 2A 9E 1D 9D BC 22 Active
Key 1: 98 F5 81 B3 1E 96 00 3C 67 59 AE 1E D5 2E 1F D2
keys still working
 

New member
Username: Joecreosta

Post Number: 7
Registered: Jun-06
malcom ... buddy ... how come its not working on my ARIZA 700 ??? i have the "AA-1_H20060610_277eEU(N)_bgmain_700.zip" bin file and I am using the keys above you gave..still NO GOO...what is going on ...... ?? tell me pleeezz someone....!
 

Silver Member
Username: Nydas

Post Number: 385
Registered: Jun-06
Your BIN is correct.
It seems you are pointing to 61.5 (Echo 3). Do FAV/All and you will see a vertical bar covering the left half of screen and at the bottom you will see the satellite direction, such as 61.5, 110, 119, 121,148.
If you are on 61.5, ZCNE (Zee Cinema) is working and so is BRDGS. Most of the W channels on 61.5 are not working, though I have not rescanned them lately. If you can confirm this then at least you know that your BIN/Keys combination is OK. Most of the W channels on 110 are working.
 

Bronze Member
Username: Oleg1474

New port richey, Fl Usa

Post Number: 41
Registered: Aug-06
PANSATs new bin...
www.ftapalace.com. thankyou PHDoleg
 

Silver Member
Username: Yo8bps

Post Number: 111
Registered: Jun-06
I am confused here !!!? What PANSAT BIN ???
 

Silver Member
Username: Yo8bps

Post Number: 112
Registered: Jun-06
There is NO FIX for PANSAT !!! You go and get the BIN from there !!!...
 

Silver Member
Username: Yo8bps

Post Number: 113
Registered: Jun-06
Komrad OLEG , STOP this FALSE PROPAGANDA !!! :-)
It's time for PERESTROYKA ! :-) :-) :-)
The COLD war is FINISHED ! :-) :-)
 

Silver Member
Username: Nydas

Post Number: 386
Registered: Jun-06
This is a thread for Keys and people trying to get help for inputing Keys etc. I am sure BUD agrees with me, when we ask you to keep your more serious questions about BINs and other rumours out of this thread. There are appropriate threads for all of that.
 

Bronze Member
Username: Brucester

Post Number: 15
Registered: Jul-06
hi just wondering if you could tell me with way to move my dish to get dishnet im pointing at bev 91 trying to get 110 and if i got to go up or down i live in ottawa ontario thanks for your help in advance
 

Silver Member
Username: Morispastora

Thunder bay, Ontario Canada

Post Number: 204
Registered: Aug-06
bruce lagasse
stand in front of your dish.move your dish 23 degres to your left hand and about
4 degrees down to get 110.
 

Silver Member
Username: Nydas

Post Number: 390
Registered: Jun-06
Good post, Pastora.
In addition, have somebody monitor the receiver for signal stregth, and fine tune your side-to-side and vertical shift of the dish.
Some people use an inexpensive angle finder. You might want to invest in this if you are likely to do this sort of thing again and again.
And last of all, if you want complete control, motorise the dish.
Best of luck.
 

Bronze Member
Username: Brucester

Post Number: 16
Registered: Jul-06
thanks for the info but could you tell me what sats are the best to scan for dishnet thanks for being so helpful.
 

Silver Member
Username: Nydas

Post Number: 391
Registered: Jun-06
Look at http://www.lyngsat*com for info on Dishnet satellites at 61.5W (New york area), 110W, 119W, 121W, abn 148W for the Pacific coast. You would probably go by where you are and the number of LNBs.
 

New member
Username: Itso

Renton, WA USA

Post Number: 4
Registered: Aug-06
Hi I have pansat 2700A , please can anyone explain to me how to enter code
thanks
 

Bronze Member
Username: Oleg1474

New port richey, Fl Usa

Post Number: 73
Registered: Aug-06
my Pansat works ok thankyou for
www.fta4dummies.com
www.ftapalace.com PHDoleg
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us