Ok anyone have the keys for dishnetwork after the May 31st hit? I dont need the old keys (already have those and dont work) and also dont need any crap saying to re-download the channels cause that has already been done.
HELP! I have found the channel master, and I have downloaded it into my computer just fine. My problem is that I can't find a channel list to go with it. I have a Pan 2700, and I am running Bin 148. Can someone please tell me how to go about finding this list? I am still learning. Thanks alot.
now i needed some complete beginner help here.... my brother usually puts in the new keys and stuff but since he is away i've got to do this... when i'm trying to put the new key into navigation 2 there are 2 rows for the key data... i have used the respective key for "00" and "01" in the first lines... but what is the second line for??? Navigation 1 was fine and only showed me one line to fill in the key... can anyone help me out? Oh and another thing....This time the screen didn't say "bad picture or scrambled channel" it says "wait for picture!! (___ %)"... is that a key issue or could it be something else? I would appreciate someones help. Thanks.
hmmm .. easy stuff if you do your reading... u need to go to... parental controls, sencon bin... go to the very bottom and set the autoroll for dn to off. press ok on set default keys. then go into nagravision 2 and use the most recent keys, once u are done press ok and you should be good.. all this is posted on this forums if you need more details...
thanks dafee... i've done as you have instructed... but i do see an extra row for the key data... i could go for a crash course of all this stuff by reading all the topics in this forum, but would appreciate some instant help with this issue so i can get things rolling. Appreciate your help!
ok your post shows the 2 key data lines for "nagravision 2" dishnetwork key number "01"..... what are the 2 key data lines that i have to use for key number "00"???..... jeez... i don't want to sound stupid but i am getting confused now!
if ur still having probs, load the 275t bin (clone safe) bin... set default keys, as you should everytime u load a new bin, press exit a few times and the receiver will download the keys for you... and if should the autoroll fail again,this bin has the option to turn autoroll off. not to mention it has a downloadable guide... nite nite
only local channels? scan, scan, scan, check your signal and anothers channels for the same satellite. If you do not have register your local channel do you need to do several scan until you get it. If you have already register your local channels check delete and scan again, for tp/satellite configuration, if your still do not have your local channel check in lyng**sat.com for tp/satellite combination and check enter manually the tp for these channels Lucky
Eva...learn about this before U give advice...U tell everyone to REGISTER your channels...what in hell are U talking about!....no such thing!...or anything remotely close to it!...the only thing U REGISTER is yourself when U join a new DSS web site!
98 F7 44 AC 5E 07 D9 ED 8A FF 3B 7E 65 71 F9 4E N 0101 01: (active)
71 9C 60 71 04 C1 39 AE 88 FF F0 5E D2 4C F3 FC these are not working anymore..... any body has any solution to this.......these keys have just gone an houre ago and it went off with all channels........ waiting disperatlly.....
Will this work from keymaster? --- ECHOSTAR KEYS N2 Updated: Thursday, June 1 2006 at 9:31 PM -------------------------------------------------------------------------------- Dish Network: N 0101 00: 98 F7 44 AC 5E 07 D9 ED 8A FF 3B 7E 65 71 F9 4E Needed for 61.5 and 121 N 0101 01: (active) 71 9C 60 71 04 C1 39 AE 88 FF F0 5E D2 4C F3 FC ----
hi guys........... do u know what exactlly happened.........some people are talking about the complete shut down on FTA.....is it true??? like it is just the key change or the software ....or it has gone forever????? waiting for response..