|
New member Username: MrnutCanada Post Number: 1 Registered: Mar-05 | I'm new to all of this and i've been searching this site for help with no luck. Can some one pls tell me how to do all this auto roll stuff. I've looked everywhere and can not figure out what i need and what i need to do. Pls help. Thanks. |
|
Boston Unregistered guest | U need a receiver,roof dish properly aimed at the 110-119 satellites..and software...the auto roll software has a README..read it...its very simple |
|
New member Username: MrnutCanada Post Number: 2 Registered: Mar-05 | Thanks Boston. Do you know where i can get the software? |
|
Anonymous | Try here' |
|
Anonymous | Try here' |
|
Hartford Unregistered guest | latest keys for every type receiver and autoroll bins (pansat and fortec) are here..along with How to guides and readme files..new keys are posted immediately,and the "getkeys" software is there too..Files for coo*lsat and BB too.. https://www.ecoustics.com/electronics/forum/home-video/129425.html |
|
Unregistered guest | I just purchased the newest bin file with the auto roll and downloaded in to my reciever and then nothing was functioning. I went outside then I and noticed I was only running under the 119 LNB and then added another cable to the 110 LNB. Then, I plugged both into the switch. Next, I adjused the antenna settings (in menu) and saved so, only 119 worked and then did the same to 110 and only the 110 worked and not the 119. Can anyone help me out with my ordeal? Does anyone know what can be wong??? |
|
Unregistered guest | I just purchased the newest bin file with the auto roll and downloaded in to my reciever and then nothing was functioning. I went outside then I and noticed I was only running under the 119 LNB and then added another cable to the 110 LNB. Then, I plugged both into the switch. Next, I adjused the antenna settings (in menu) and saved so, only 119 worked and then did the same to 110 and only the 110 worked and not the 119. Can anyone help me out with my ordeal? Does anyone know what can be wong??? |