Surround Sound Hookup

 

New member
Username: Ggreen

Post Number: 2
Registered: Jul-05
I have an old Sony STR-DE515 "AC-3 Ready" Pro Logic Receiver. I have it hooked up to my DVD player via the audio cables, the DVD drives the TV display with a S vidoe cable.

My question is, can the receiver process "Surround Sound" without a "AC-3 Ready" Processor? If I turn on the Surround Sound and select PRO LOGIC, is my configuration going to give me the proper sound?

Thanks in advance for any help
 

New member
Username: Bama12

Loxley , Al Usa

Post Number: 1
Registered: Aug-05
i have a sony reciever b-m: son strde635 had a protector error comes up constantly what are we doing wrong ; plus our 2 small speakers in the back ground do not seem to put out the sound right[sounds like an echo ]can you help us.

thanks for your help
 

New member
Username: Ggreen

Post Number: 7
Registered: Jul-05
I also get the protector error, usually after using the remote to change the volume. I've never been able to figure out why.

I don't have the rear speakers in my setup (just the 3 in the front and the subwoofer). Its possible you don't have the Surround Sound mode set correctly, I always use Dolby when watching DVDs and turn the Surround Sound off (just stereo) when watching everything else.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us