Please help me set up my amplifier to my limited connection TV

 

New member
Username: Pepsiman

Post Number: 1
Registered: Jan-05
Hi - I have a Sony STRDE595 amplifier in my dining room connected to my Pioneer DV525 DVD player by digtal coax. The DVD is connected to the TV by RGB Scart.
I now want to connect the TV to the Amplifier. It is a Samsung Widescreen stereo TV but as this is only for the dining room it is only 24 inch widescreen and so does not have all the outputs I would like.
It has 2 Scart sockets and 3 phono inputs only (no outputs).
Previously I have used a vhs player to pick up the RF lead and with RCA Audio outputs, however the problem I have ( apart from there being no VCR) is that for the TV picture I am using a Coax lead from RF2 on the Sky box with magic eye). If I run this through a VCR the magic eye stops working.
If I use a switchable (input or putput) scart adpator with 3 phonos on it can I put that in one of the TV scart sockets, set it to output and then take the audio off of that to the Amplifier?
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us