|
New member Username: Transformer105Post Number: 1 Registered: Dec-07 | I have the new code on a USB so I am not worried about that. However the problem is, while I was playing around with the satelite (yes i will learn from my mistake) i pressed factory default and clicked yes, and all the channels got erased and no guides whatsoever. And I tried putting the code a million times but the channels still didnt show up, and it just says "no channels"...can some one please help me on this! thanks! |
|
Bronze Member Username: ExtremexPost Number: 49 Registered: Nov-07 | Setup your sat settings and then do an autoscan. |
|
Bronze Member Username: RazzorwyrePost Number: 46 Registered: Dec-07 | Hello aaa you will need set you your satellites again and rescan for channels |
|
New member Username: Transformer105Post Number: 2 Registered: Dec-07 | how would i set my sat settings? is there any specific way? |
|
Bronze Member Username: RazzorwyrePost Number: 47 Registered: Dec-07 | you will need to go into your antenna settings then depending on your LNB type you will need to add the LNB, port and switch info for each satellite. |
|
Gold Member Username: Ke5aqnIF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 1836 Registered: Sep-06 | your settings have to match your set up...if you have a motor , or use 4 dishes whatever...... please read this guide it will help you to fix your receiver..https://www.ecoustics.com/electronics/forum/home-video/412799.html |
|
New member Username: Transformer105Post Number: 3 Registered: Dec-07 | hmm ok i will try what you are saying. thanks...it sounds confusing but lets see |
|
Bronze Member Username: RazzorwyrePost Number: 48 Registered: Dec-07 | TFT.. i am interested in this motor set up. What would I need other than the motor. I currently use the DN double lnb i believe its the legacy with swith 42. |
|
New member Username: Transformer105Post Number: 4 Registered: Dec-07 | hmmm this is werid, i got some channels to work cuz i played around with the atenna scan and channel scan...but is there any faster way to get all the channels? |
|
Silver Member Username: Jagr1234Post Number: 105 Registered: Nov-07 | use channel master |