Tested the puff 205 on converted FLU and still freezing. First loaded the Ukr_-PUFF-ConversionFlashFix.bin then the new 205 but same result. Think we will have to wait for a proper fix.....
I think Ukronic jumped the gun. The same old conflict of memory problem bugs the 205 at load time. if not, then in the next phase, there is memory conflict in the channel list area. I suggest, all wait for the Fwak7 version of 205 and/or a Tronic direct load. Note that the genuine 2700s using the BL BIN are not (yet) reporting any freezing.
PUFF_205 for FLU/2500 Conversion to 2700 Full kits for Latest conversion BINs and other files - also for Revert to 2500
[link removed]
Download and unzip into separate directory. This appears to be a full EMU version. Slightly changed instructions have been posted in the kit and also separately. PLEASE DO NOT ATTEMPT WITHOUT READING INSTRUCTIONS.
Quick quesion nalin, if i loaded bin 24 last nite and did all the UKR-puff-conversionflashfix (by the way is this the file known as 101?)), do i have to do it all over again or just do a channel delete and tehn factory setting before downloading the 205 into the box...thats where i get kinda lost, any help will be appreciated.
PUFF_205 Stuck on 'F' '" Full Recovery Kit. If you are stuck on 'F', Use 'Stuck on_F.zip All necessary files are included Tested with Nikk PUFF_205 - included
Alternative Stuck on 'F' link
Download and unzip into separate directory. PLEASE DO NOT ATTEMPT WITHOUT READING INSTRUCTIONS.
Has PUFF 205 stopped freezing or is it the same as 204...just wondering whether I should delete my channels and put 205 in (I have 204) and did used the UKR flashfix before loading that bin....please advise
Reloading the flashfix will not make any difference. Delete channels, software reset, hardware reset, new Bin, software reset, hardware reset, user setup, antenna setup, one sat blind scan, hardware reset, other sats blind scan.
1 If it's getting stuck on "F" use the UKR-puff-conversionflashfix.
2 If channels are freezing, delete all channels and rescan."
I just wanted to confirm what abby and nalin say, they are ABSOLUTELY RIGHT AND UP TO THE POINT. You MUST delete all exsisting channels, and MUST rescan and not use a saved channel list otherwise it will keep freezing. The stuck F is only solved by using the 101 Ukronic boot loader. Remember to hard reset after each satellite scan or bin load.
Forgot to add, for those that uploaded the boot and bin for the 204 only need to load 205 just as before. Meaning, just upload the bin as you did prior to 204 (203 etc.) and enjoy. You don't need to do anything other than load the new bin.