|
| They are pretty old like 30 years but they still kick butt. I was wondering how would I set the equalizer settings in my receiver. The Speakers have one Tweeter and a woofer. They are 8 omhs and there is a switch with five settings with one of the settings labled normal. I believe this may be a crossover or something. The tweeter plays the high and mid-range while the woofer is the low end. Any help would be appreciated!!! |
|
| Jason, When you adjust an equilizer, one way that I like is to push all the volumes down. Bring up one at a time and listen for the spot that gives that frequency a clear but stable sound. Repeat for each frequency fader. From there you adjust to taste. Every speaker, room and amp etc. has its own sound so bringing up one frequency at a time has always helped me to hear whats right. Ray http://www.newtechnologyhome.com |
|
| I have ata-d2100 Sansui system. On the back I have hookup for 4 speakers. Their is 2 A and B. 2 conections on both a - and A+ B- and V+. How should i conectt the 4 speakers. |