|
Silver Member Username: PizzaPost Number: 196 Registered: Nov-06 | I used to get this signal without any trouble with my 36" dish, now I have problem with that, It is very hard to find the signal. is there any reason. I |
|
Gold Member Username: KrishnPost Number: 1170 Registered: Sep-06 | Could be LNB, switch, cable or even dish moved. Are you getting other satellites OK? |
|
Silver Member Username: PizzaPost Number: 197 Registered: Nov-06 | yeah, I removed the dish and now I am trying to fix it back. It is very hard to find signal on reintallation. one time try I have to move the LNB 5", 6" high than normal old place.(Which is from LNB holder) Is there any reason my dish got bend or damage because i left it on the ground for few weeks. May be somebody steps on it. |
|
Diamond Member Username: NydasPost Number: 21889 Registered: Jun-06 | Dishes don't distort so easily. Keep on looking and you will find the signals |
|
Silver Member Username: PizzaPost Number: 198 Registered: Nov-06 | i used 33" and i get 0% standard signal, I used 36" also get 0%. I think lnb holder bent. I was trying to pull dish back it shows 0%. Do you think if I buy new dish I could fix it. Or Find a technichian to fix it. |
|
Gold Member Username: RunnerguyPluto Post Number: 2416 Registered: Sep-06 | pizza.....in all likelihood your LNB arm is bent. NN has good intentions but is not capable of helping you. |
|
Gold Member Username: PulpfiktionPost Number: 1004 Registered: Mar-08 | pizza..... zulu bad guy. He don't no anything. He dont like nydas, so he say bad things. |
|
Gold Member Username: KrishnPost Number: 1176 Registered: Sep-06 | Try if you can get 119, provide your LNB information and settings. Also put it on different transponders on 118 and check signal strength. |
|
Silver Member Username: PizzaPost Number: 199 Registered: Nov-06 | My old LNB(DIGIWAVE) did not work so I bought new one Eagle star pro circular LNB, I tried hard, I get 70% s and o% Q I get Horizontal 1 channel, vertical none. some other channels are working, they are not use . I changed all transponders and check all things. do you think do i have to buy new lnb |
|
Diamond Member Username: NydasPost Number: 21890 Registered: Jun-06 | https://www.ecoustics.com/cgi-bin/bbs/show.pl?tpc=2&post=1675314#POST1675314 |
|
Diamond Member Username: NydasPost Number: 21894 Registered: Jun-06 | Pizza: AnikF2 satellite at 118W was a bit shaky and the signals were lost. Plymouth has posted a detailed report about it. Check it out. The services ar now restored |
|
Silver Member Username: PizzaPost Number: 200 Registered: Nov-06 | 119 W is working for me but not 118 Anik F3 (same LNB) in anik F3 some channels are working, I do not know the reason why I could not get other channels. I need Anik F3, |
|
Gold Member Username: KrishnPost Number: 1181 Registered: Sep-06 | Pizza - as I suggested earlier did you put it on different transponders on 118 and checked the signal and quality on each transponder? |
|
Silver Member Username: PizzaPost Number: 201 Registered: Nov-06 | i could say few TP shows some signal strength, others are not moving more than 10 Q% 119/118 shows 2 or 3 TP are working. |
|
Gold Member Username: KrishnPost Number: 1182 Registered: Sep-06 | Some aiming could solve your problem, it is quite sensitive |
|
New member Username: DovleacPost Number: 1 Registered: Nov-08 | Pizza Be sure your LNB will do KU circular for 118 . 119 is dn circular. I get 118 with 24 in dish no problem special LNB For pointing coordinates go to lyngsat and will give you set up if you don't use proxy. Sorry for getting involved but I went through this when they switched to circular low ku band. |
|
Gold Member Username: KrishnPost Number: 1183 Registered: Sep-06 | dovleac galben: Please feel free to post. Difficult to get lower frequency transponders like 11715, 11728 especially with 24 inch dish even in most favorable location. What LNB you use? |
|
New member Username: DovleacPost Number: 2 Registered: Nov-08 | This is from where I buy my stuff and this is the LNB I use xxxx://www.shop4fta.com/118-119-circular-dual-lnbf.php You know the drill replace (xxxx with http) If I did wrong please delete link and forgive me. |