|
Bronze Member Username: UsdocPost Number: 26 Registered: Feb-05 | I have receiver neosat preloaded with TP"s, like echostar 3,4,8 and other how do I get rid of them, or better how do I load european astra1, 19.2 to be exact. thanks for the help, jeri |
|
Platinum Member Username: PlymouthCanada Post Number: 15510 Registered: Jan-08 | jiri If it is available on your receiver, do a blind scan on this satellite then all Tp's will be created! |
|
Silver Member Username: ChevroletPost Number: 175 Registered: Sep-10 | You can Rename or Delete the satellites check your Users Manual for instructions pull up LyngSat Astra 1G at 31.5°E Astra 1H/1KR/1L/1M at 19.2°E Edit the (TPs) transponders Scan one Bird @ a time. |
|
Diamond Member Username: NydasPost Number: 20076 Registered: Jun-06 | jiri: astra1, 19.2E 1. If it is not listed in your receiver, it does not matter. 2. You must have the appropriate Dish and LNB for 19.2E 3. Your dish must point to19.2E and you should see green signal at at least 70% stregth. 4 A. Using any unused sat name, you can do a Blind scan. 4 B. You can add a new sat name in your list of Birds and do a Blind Scan. |
|
Gold Member Username: DoreenakadjCanada Post Number: 5029 Registered: Dec-06 | |
|
Diamond Member Username: NydasPost Number: 20078 Registered: Jun-06 | You could join this forum in UK to get more help http://www.satellites.co.uk/forums/ |
|
Silver Member Username: ChevroletPost Number: 181 Registered: Sep-10 | I have receiver neosat preloaded with TP"s, like echostar 3,4,8 and other Usdoc.....for Astra 1G at 31.5°E and Astra 1H/1KR/1L/1M at 19.2°E you will need a Linear type Lnb for the FTA channels On user setup TV Type set it to ( PAL) } |
|
Bronze Member Username: UsdocPost Number: 27 Registered: Feb-05 | thanks to everyone for help, I let you know later if your advices worked. |
|
Silver Member Username: ChevroletPost Number: 183 Registered: Sep-10 | If you are now located in European no problem If you still in North America forget the info. posted above. |
|
Bronze Member Username: UsdocPost Number: 28 Registered: Feb-05 | thanks guys, but any of your suggestions are not working I have a appropriet LNB and dish, pretty good signal, try to use a blind scan but it is NOT finding any TP or channels. maybe I do something wrong?? I have questioned some guys here in europe, they told me I need to download bin from computer and generally is too complicated. I am not a comp or sat freek, therefore, still have a problem. using european receivers is no problem, I´d like to try the neosat to load. |
|
New member Username: Thx_34l7Post Number: 1 Registered: Nov-10 | I am located in North America you are located in European I can install your system, but can do it from my computer I charge $50.00 an hour plus my expenses. E-mail me if you are interested. |
|
Gold Member Username: Mrskullz1New York Post Number: 1917 Registered: Feb-07 | Don't listen to this fool above charging to do this. You can definitely do this by yourself. It will just take some time for you to get familiar with Neosat and how the whole system works. First off, do you see any of the satellites you need already loaded in your neosat? If you don't, you should be able to add a new satellite and add the necessary TPs (possibly from lyngsat.com) manually. You should be able to scan afterwards and get all channels you need. Now if your able to view any channels (because of encryption, etc) is a completely different issue. Your best option is to find a forum (ideally one which many users located in Europe) and ask there. This is not a difficult task. All you need is a bin or a TP file list and need to get it loaded onto your neosat. If i'm not mistaken, the neosat should have a USB port so it will be extremely easy to load. |
|
Bronze Member Username: UsdocPost Number: 29 Registered: Feb-05 | no, I dont see any eoropean satellites, only american such echostar, nimiq,amc, etc thanks, anyway, I will try to contact someone on european forum jeri |