1. Home
    2. >
  2. Forum
    3. >
  3. Home Video Forum
    4. >
  4. Satellite TV Forum
    5. >
  5. Archived Satellite TV Threads Forum
    6. >
  6. Archive through November 09, 2010 Forum
    7. >

Sada/Nalin! rq-ssp-client (Notepad)..I am still not getting ANYTHING

 

fm
New member
Username: Fmdish

Post Number: 1
Registered: Nov-10
Posted on   
I am trying to setup my CW600s Premium since last 3 days but I am still unsuccessful. I am using USB to RS-232 cable but still I m not getting ANYTHING. Please Please Please can somebody be kind enough and let me know that the information I entered in my notepad is correct or not. Here is C/P

###############################################################################
# rq-sssp-client configuration file
#
# All configuration options in this file observe the same format:
#
# <configuration_name>=<configuration_value>
########################general configuration #################################
[General]
# Serial port where the client receiver is connected.
# Examples:
# Linux PC: /dev/ttyS0, /dev/ttyS1, ... /dev/ttyS<n>
# Dreambox/TD/DGS: /dev/tts/0, /dev/tts/1, ... /dev/tts/<n>
# Windows: COM1, COM2, ... COM<n>
serial_port=COM3
# Serial port communication settings.
# Example: 115200|8|N|1 = 115200bps, 8 data bis, no parity, 1 stop bit.
serial_port_settings=115200|8|N|1
# Receiver protocol (only SSSP supported).
# 0 - SSSP
receiver_protocol=0
# Sets the byte write delay. The default value of this parameter is zero.
#
# IMPORTANT: Normally you should *not* need to change this value. But if
# you're having problems with unreliable emu board communication, you can
# tweak this to see if the situation improves. Sensible values for this
# parameter go from 0 to 500 (microseconds).
#
# NOTE: This parameter *has no effect* in the Dreambox versions (PPC and MIPS).
byte_write_delay=0
# Enable or disable background execution
# 0 - Disable
# 1 - Enable
#
# NOTE: Ignored in the WIN32 version
background_execution=1
# This sets the level of console output for debugging:
# 0 - Silent, 1 - Basic debug info, 2 - Extended debug info,
# 3 - Show all debug info
debug_level=1
# This option enables or disables the writing of debug information to the
# console.
log_to_console=0
# This option enables or disables the writing of console output to a log file
log_to_file=0
# When log_to_file is set to 1, this is the path and filename to write console
# ouput to.
#
# NOTE: In the WIN32 version, if enabled, this should be set to a valid
# Windows/DOS path.
logfile_name=/var/bin/rq-sssp-client.log
# URL of card-server to use, formats are as follows:
#
# newcamd://<username>:<password>@<hostname>:<port>/<des_key>/[EMM]
#
# Example:
# newcamd://aaaaaaaaaaaaaa:aaaaaaaaaaaaaa@fenfui.dynsite.net:10010/610340344540697 0987123412134/EMM
#

I replaced aaaaaaaaaaaa with the donation number which I received in the mail.
If any changes has to be made, please let me know.
Thanks in advance
 

sada
Gold Member
Username: Saqeeb9000

Post Number: 7400
Registered: Oct-07
Posted on   
i will recommend u to also post this at ftabeta.com
people with similar reciever..will answer u better solution to this problem..
 

fm
New member
Username: Fmdish

Post Number: 2
Registered: Nov-10
Posted on   
Thanks sada, I posted on ftabeta.com. Lets see
 

Mr. Skullz
Gold Member
Username: Mrskullz1

New York

Post Number: 1903
Registered: Feb-07
Posted on   
Heres a few things to check.

First make sure your really connected to serial com port 3.

Then, make sure you enable patch and card share on your box. Make sure autoroll is OFF.

Now finally to view any channel, you have to hit the 'page up' button and then change the ecm id to 1816 (choose the second line and hit enter). Unfortunately, you have to do this to every channel in order to view them.
 

Doreen
Gold Member
Username: Doreenakadj

Canada

Post Number: 4961
Registered: Dec-06
Posted on   
text/plainUpload
captive works user manual.txt (13.1 k)
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us