Sharp Aquos...

 

New member
Username: Hatrabbit

Post Number: 1
Registered: Jul-10
Hi,
I just did a firmware upgrade on my Sharp LC-C5255U. All went smoothly, ending with the message ""System software was successfully updated. Remove the usb memory device." I pressed OK and removed the flash drive... now the problem. The message won't go away. No matter where I navigate in the menu, turn power off, unplug, etc., the message telling me the upgrade was successful pops back up and stays. Anyone hear of this before or have any suggestions? Thanks.
 

New member
Username: Lawnmowerman

Post Number: 2
Registered: Jul-10
Hi
I had a similar problem a while back and left the screen unplugged overnight

It worked, I am not sure why.

I currently have a more complicated problem and have read manual etc cover to cover.

My screen keeps flicking between chanels and will not stay on Ext3 - which is now the only one connected to a DVD player.

I have diconnected all other stuff amp etc..

If I try to watch a DVD I have to keep selecting the channel to go back to the film - almost every 2 or 3 minutes.

Do you know the solution to this one?

Best regards

Larry
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us