Mitsubishi Rear Projection WS-65713 red convergence issue.

 

New member
Username: Realtoray

Lebec, CA US

Post Number: 6
Registered: Nov-08
I Had an error code 22 problem and I purchased a repair kit from tvrepairkits.com .

I had a very nice gentleman come out to help me and he changed the 2 IC chips and tested the pico fuses and replaced two bad ones.

The tv turns on now and if you check for an error code it is 12 which is no error found. But the Red will not converge. You can't adjust it or even move the red lines and when you view the picture it has a red hue to it and you get red static horizontal lines that stretch off of the images.

Does anyone know what may be causing the static effect? I read a post from the archives that mentioned someone who had a similar problem found that when they pulled out the tray from the back of the TV to repair the IC'S they had pulled a socket half way open on the video card and when they pushed it back in it corrected the problem. I just don't know where to look for that type of plug or socket on a video card.

Thanks for any help that can be given.
« Previous Thread Next Thread »

Add Your Message Here

Bold text Italics Create a hyperlink Insert a clipart image Add a YouTube Video
Need to Register?
Forgot Password?
Enable HTML code in message
   



Main Forums

Today's Posts

Forum Help

Follow Us