No video or audio

harry New member Username: Hdave555 Post Number: 4 Registered: Nov-07	Posted on Sunday, March 21, 2010 - 17:32 GMT hello everyone i have VS Ultra and i have WF but when i install new bin and update software and scan for channels but i dont get all channels but no video or audio i have very good signal and quality they shows up full but no channels. any set up you can help me or guide me any help guyzz
Chaff Bronze Member Username: Chaff Post Number: 79 Registered: Jan-10	Posted on Sunday, March 21, 2010 - 19:16 GMT The software to open the channels has not been released .
Plymouth Platinum Member Username: Plymouth Canada Post Number: 13240 Registered: Jan-08	Posted on Sunday, March 21, 2010 - 20:55 GMT Harry After you loaded the file, do a factory default then scan your satellites!
Plymouth Platinum Member Username: Plymouth Canada Post Number: 13241 Registered: Jan-08	Posted on Sunday, March 21, 2010 - 20:57 GMT Read the kbox instruction on this thread: https://www.ecoustics.com/electronics/forum/home-video/625997.html
harry New member Username: Hdave555 Post Number: 5 Registered: Nov-07	Posted on Sunday, March 21, 2010 - 23:52 GMT thanks for your hep guyz bu no luck same issue no video or audio. any more help that can offer.
harry New member Username: Hdave555 Post Number: 6 Registered: Nov-07	Posted on Sunday, March 21, 2010 - 23:56 GMT i have another question how can you rescan your your satellites? i know how to do channel scan like auto scan and blind scan and stuff but never did satellites scan. can you also provide me with configuration for satellites LNB Type, Frq TP Frq and stuff thank you for all your help
Chaff Bronze Member Username: Chaff Post Number: 89 Registered: Jan-10	Posted on Sunday, March 21, 2010 - 23:57 GMT The software to open the channels has not been released . or try plymouths method while doing a handstand and juggling truffles
Plymouth Platinum Member Username: Plymouth Canada Post Number: 13256 Registered: Jan-08	Posted on Monday, March 22, 2010 - 00:34 GMT What a bunch of idiots looser! The software is there: ~~http://currentbins.com/ftafiles/~~ kbox tested it and the file is out and work! kbox Silver Member Username: Kbox Post Number: 145 Registered: Jul-09 You are more and more stupid with each post you do on this forum!
harry New member Username: Hdave555 Post Number: 7 Registered: Nov-07	Posted on Monday, March 22, 2010 - 00:34 GMT does it mean that no one is watching channels on VS Ultra
Plymouth Platinum Member Username: Plymouth Canada Post Number: 13260 Registered: Jan-08	Posted on Monday, March 22, 2010 - 00:47 GMT Harry The file is out and work on Dn! Don't listen those stupid newbies!
harry New member Username: Hdave555 Post Number: 8 Registered: Nov-07	Posted on Monday, March 22, 2010 - 00:59 GMT thanks plymouth. but i still get this no video or audio i need help fixing this.
Nalin Nyda Platinum Member Username: Nydas Post Number: 18589 Registered: Jun-06	Posted on Monday, March 22, 2010 - 01:05 GMT The software for Viewsat with Weather Forecaster has been released. today.
Plymouth Platinum Member Username: Plymouth Canada Post Number: 13265 Registered: Jan-08	Posted on Monday, March 22, 2010 - 01:14 GMT Harry You must do a factory default as soon you loaded the file from currentbins, then you scan with the autoscan! You have to wait on a working channel until the picture come!

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us