some do this way. 1. Factory Reset 2. load "Factory File 1.81" 3. Factory Reset 4. load "BIN File 2.18" 5. Factory Reset 6. check "System Information" to verify new BIN File version. 7. check options turn off all AU and make sure MODE is set to Network 8. set Time Settings 9. set satellites properties and scan satellites to fetch Channels. __________________
I did this way. Using cable Null Modem +PC+kboxloader210
No factory reset . load factory file Open loader + look for factory file Turn Off receiver with back switch Press on start on loader Turn on reciver back switch when reciveir shows 0075 turn off whit back switch Look for file 218 and repeat the same as 181 file, this way no ch.lost or settings. receiver will has the same channels as before. after you can do a factory reset if you want and rescan for new ch. this way never will be problems with H1. or night riders
Post Number: 847 Registered: Jun-08 Posted on Friday, February 19, 2010 - 10:26 pm:
-------------------------------------------------------------------------------- curioso amable, ese ese el factory file, le pones primero ese para el kbox prod. y despues este que ya esta posteado en ftabins. K1pro_218_20100218
lo mismo se hace con el kboxplus.y despues se rescan. saludos Nikk Mty y a todos los del foro
Nikk_Mty Silver Member Username: Nikk_mty
Post Number: 106 Registered: Jul-08 Posted on Friday, February 19, 2010 - 10:36 pm:
-------------------------------------------------------------------------------- Saludos mi bien apreciado Juan.....
Saludos a todo el foro
We gave away the seniority from 06 .we don't care about that anymore, But I read and know many from this forum, I know when LK posts,as I'm reading him since almost 2004