1. Press Menu 2. Using right arrow on remote, select Installation 3. Highlight Channel Search 4. Press OK (Enter Password if set up to have password) (0000) 5. Press Red button (TP Edit) 6. Select Satellite that you want to add/edit/delete a tp by highlighting Satellite then press OK 6. Scroll down/up to the Satellite you want then press OK (It will bring you back to the Channel Search ) 7. Green button is for adding TP; Yellow button is for TP delete
also u can try higher freq ( if u get signal there ) for example 12000, or below 11959 and try to scan from there, some times channel come this way too...